Skip to Content

Changes for page 3.3 Control

Last modified by Admin on 2026/04/30 15:56
From version 87.11
edited by Admin
on 2026/04/02 10:31
Change comment: There is no comment for this version
To version 87.13
edited by Admin
on 2026/04/02 10:36
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -542,13 +542,13 @@
542 542  
543 543  === Charge/Discharge ===
544 544  
545 -The BMS Main 3 / BMS Main 2R device can control the contactor, used in power line both used for connecting battery to charger and load,
545 +The BMS Main 3 / BMS Main 2R device can control the contactor, used in power line both used for connecting battery to charger and load, by using the "Charging/Discharging" signal.
546 546  
547 -Charge/Discharge contactor has three algorithms of operation:
547 +"Charging/Discharging" signal has three algorithms of operation:
548 548  
549 -On **Dependent (on Charging and Discharging signals)** algorithm the charge/discharge contactor depends on Charge and Discharge controllers and behaves:
549 +On **Dependent (on Charging and Discharging signals)** algorithm the "Charging/Discharging" signal depends on Charge and Discharge controllers and behaves:
550 550  
551 -* as Charging contactor if "Charging" signal is set;
551 +* as "Charging" contactor if "Charging" signal is set;
552 552  * as Discharging contactor in other cases.
553 553  
554 554  When **Independent (Always) **algorithm is selected, the charging/discharging contactor is always closed. If at least one of the errors from the "Errors 1, 2 ..." bitfields appears or one of the signals: