Skip to Content

Changes for page 3.3 Control

Last modified by Admin on 2026/04/30 15:56
From version 76.17
edited by Admin
on 2026/03/31 14:11
Change comment: There is no comment for this version
To version 76.18
edited by Admin
on 2026/03/31 14:16
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -609,17 +609,17 @@
609 609  
610 610  In this section:
611 611  
612 -* Enable – a flag to activate the auxiliary discharge control;
613 -* Switch off the discharging (AUX) contactor if the SOC is too low;
614 -* Minimum SOC – a minimum SOC value, when reached, the auxiliary (AUX) discharging contactor opens, %;
615 -* Tolerant SOC – a permissive SOC value, upon reaching which the auxiliary (AUX) discharging contactor re-closes, %;
616 -* Switch off the discharging (AUX) contactor if the cell voltage is out of the range;
617 -* Minimum cell voltage, V;
618 -* Maximum cell voltage, V;
619 -* Switch off the discharging (AUX) contactor if the battery voltage is out of the range;
620 -* Minimum battery voltage, V;
621 -* Maximum battery voltage, V;
622 -* Errors 1, 2 to open the auxiliary discharging contactor – bitfields to choose the errors which will open the auxiliary discharging contactor.
612 +* **Enable **– a flag to activate the auxiliary discharge control;
613 +* **Switch off the discharging (AUX) contactor if the SOC is too low**;
614 +* **Minimum SOC** – a minimum SOC value, when reached, the auxiliary (AUX) discharging contactor opens, %;
615 +* **Tolerant SOC** – a permissive SOC value, upon reaching which the auxiliary (AUX) discharging contactor re-closes, %;
616 +* **Switch off the discharging (AUX) contactor if the cell voltage is out of the range**;
617 +* **Minimum cell voltage**, V;
618 +* **Maximum cell voltage**, V;
619 +* **Switch off the discharging (AUX) contactor if the battery voltage is out of the range**;
620 +* **Minimum battery voltage**, V;
621 +* **Maximum battery voltage**, V;
622 +* **Errors 1, 2 to open the auxiliary discharging contactor** – bitfields to choose the errors which will open the auxiliary discharging contactor.
623 623  
624 624  === Cell balancing ===
625 625  
... ... @@ -656,7 +656,7 @@
656 656  
657 657  In this section:
658 658  
659 -* Enable – a flag to enable cell balancing;
659 +* **Enable **– a flag to enable cell balancing;
660 660  * Balancing rule:
661 661  ** Balance on charge – balancing is performed while and after the charging (in the “Charge ON” and “Charge OFF” states);
662 662  ** Balance on charge or relaxed - balancing is performed while and after the charging and in the relaxed state (in “Charge ON”, “Charge OFF”, “Relaxed (after charging)” and “Relaxed (after discharging)” states);