Changes for page 3.3 Control

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -71,7 +71,7 @@
71	71	* Minimal SOC – the battery SOC is assumed to be the minimum SOC among the cells;
72	72	* Average SOC – the battery SOC is taken equal to the arithmetic average of the cell SOC;
73	73	* Min-Max SOC – the battery SOC is calculated based on the minimum and maximum SOC of the cells. Final SOC will be a) 100% if any cell has 100% SOC, b) 0% if any cell has 0% SOC;
74		-* Max-Min SOC – the battery SOC is calculated based on the minimum and maximum SOC of the cells. Final SOC will be a) 100% if all cells have 100% SOC, b) 0% if all cells have 0% SOC.
	74	+* Max-Min SOC – the battery SOC is calculated based on the minimum and maximum SOC of the cells. Final SOC will be a) 100% if all cells have 100% SOC, b) 0% if all cells have 0% SOC;
75	75
76	76	Other parameters:
77	77
...	...	@@ -471,7 +471,7 @@
471	471	* Allow charging only when the "Ready to charge" signal is set – charging contactor will open if "Ready to charge" signal is cleared;
472	472	* Delay before starting charging – a time delay T,,on,, before closing the charging contactor and the allow charging contactor, millisecond;
473	473	* Delay before stopping charging – a time delay T,,off,, before opening the charging contactor, millisecond;
474		-* Control the precharging contactor – a flag that allows control of the precharging contactor while closing the charge contactor (see [[Precharge>>path:#HPrecharge]]);
	474	+* Control the precharging contactor – a flag that allows control of the precharging contactor while closing the charge contactor;
475	475	* Errors 1, 2 to open the charging contactor – bitfields to choose the errors which will open the charging contactor;
476	476	* Use custom delays before stopping charging (on errors) – a flag to enable manual settings of time delays T,,off,, for specific errors;
477	477	* Custom delay: <error> – delay for specific error, millisecond;