Skip to Content

Changes for page 3.3 Control

Last modified by Admin on 2025/04/09 12:14
From version 16.1
edited by Admin
on 2024/12/24 18:20
Change comment: Uploaded new attachment "1735064434321-430.png", version {1}
To version 13.2
edited by Admin
on 2024/12/24 18:14
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -359,8 +359,6 @@
359 359  
360 360  === Charging status ===
361 361  
362 -* Current corresponding to charging – a current level to generate the "Charging current present" signal, A;
363 -* Current corresponding to no charging – a current level to clear the "Charging current present" signal, A;
364 364  * Voltage to clear the “Ready to charge” – a threshold voltage level on the cell, V; if the voltage of any cell is above this level, the “Ready to charge” (hence, the “Allow charging”) signal is cleared;
365 365  * Voltage to reset the “Ready to charge” – a tolerant voltage level on the cell, V; if all cell voltages are below the tolerant level, the “Ready to charge” (hence, the “Allow charging”) signal is set;
366 366  * Delay before recharging – a time after which the previously opened the allow charging contactor closes again, minute; to disable the operation by timeout set "Delay before recharging" to 0.
... ... @@ -374,8 +374,6 @@
374 374  
375 375  === Discharging status ===
376 376  
377 -* Current corresponding to discharging – a current level to generate the "Discharging current present" signal, А;
378 -* Current indicating no discharging – a current level to clear the "Discharging current present" signal, А;
379 379  * Voltage to clear the “Ready to discharge” – a threshold voltage level on the cell, V; if the voltage of any cell is below this level, the “Ready to discharge” signal is cleared;
380 380  * Voltage to reset the “Ready to discharge” – a tolerant voltage level on the cell, V; if all cells voltages are above the tolerant level, the “Ready to discharge” signal is set;
381 381  
... ... @@ -448,6 +448,8 @@
448 448  ** On charger connected – charging is allowed when there is a signal “Charger connected”;
449 449  ** On charge request – charging is allowed when there is a signal “Charge request”;
450 450  * Allow charging only when the "Ready to charge" signal is set – charging contactor will open if "Ready to charge" signal is cleared;
447 +* Current corresponding to charging – a current level to generate the "Charging current present" signal, A;
448 +* Current corresponding to no charging – a current level to clear the "Charging current present" signal, A;
451 451  * Delay before starting charging – a time delay T,,on,, before closing the charging contactor and the allow charging contactor, millisecond;
452 452  * Delay before stopping charging – a time delay T,,off,, before opening the charging contactor, millisecond;
453 453  * Control the precharging contactor – a flag that allows control of the precharging contactor while closing the charge contactor;
... ... @@ -520,7 +520,9 @@
520 520  ** Always on – load is always connected;
521 521  ** On charger disconnected – load is connected when there is no signal “Charger connected”;
522 522  ** On discharge request – load is connected when there is signal “Discharge request”;
523 -* Allow charging only when the "Ready to discharge" signal is set – discharging contactor will open if "Ready to discharge" signal is cleared;
521 +* Allow charging only when the "Ready to discharge" signal is set – charging contactor will open if "Ready to charge" signal is cleared;
522 +* Current corresponding to discharging – a current level to generate the "Discharging current present" signal, А;
523 +* Current indicating no discharging – a current level to clear the "Discharging current present" signal, А;
524 524  * Delay before starting discharging – a time delay T,,on,, before closing the discharging contactor, millisecond;
525 525  * Delay before stopping discharging – a time delay T,,off,, before opening the discharging contactor, millisecond;
526 526  * Control the precharging contactor – a flag that allows control of the precharging contactor while closing the discharge contactor;
1735064362593-844.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -35.8 KB
Content
1735064399985-526.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -36.1 KB
Content
1735064434321-430.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -27.5 KB
Content