Skip to Content

Wiki source code of 3.1 General information

Version 10.4 by Admin on 2025/02/11 15:39
Hide last authors
Admin 2.1 1 (% data-numbered-headings-start="3" style="--numbered-headings-start: 2;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
2 = Configuration =
3
4 (% data-numbered-headings-start="1" style="--numbered-headings-start: 0;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
5 == General information ==
6
Admin 8.2 7 This document describes how to configure the BMS Main 3 device.
Admin 1.1 8
Admin 8.2 9 Configuring can be done using the ElectricDeviceMonitor above the 1.18.0 (available by the [[link>>url:http://movicomelectric.com/wa-data/public/site/app/ElectricDeviceMonitorSETUP.exe]]) via
10
Admin 7.4 11 * USB;
12 * CAN bus (Systec, PEAK, Marathon and USB-CAN adapters are supported);
13 * TCP connection (BMS Wi-Fi or BMS LANmodule must be installed on BMS Main 3).
Admin 7.3 14
Admin 8.1 15 After connecting device to the PC, launch ElectricDeviceMonitor, select "Unified monitor" in the main program window:
Admin 7.5 16
Admin 6.2 17 [[image:1735233230234-960.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="340" width="450"]]
Admin 1.1 18
Admin 6.4 19 Choose the connection type and set up connection settings:
Admin 6.2 20
Admin 7.5 21 * Serial port (USB): choose the corresponding COM port;
Admin 6.2 22
Admin 7.5 23 [[image:1733320484262-545.png||data-xwiki-image-style-alignment="center" height="311" width="450"]][[image:1733320484267-118.png||data-xwiki-image-style-alignment="center" height="248" width="450"]]
Admin 6.4 24
Admin 7.2 25 * Systec USB-CAN, PEAK USB-CAN, Marathon USB-CAN, BMS USB-CAN: select the device in device list, specify the CAN speed and BMS device address:
Admin 6.4 26
Admin 7.3 27 [[image:1735233434987-983.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="248" width="450"]]
Admin 6.4 28
Admin 8.1 29 * TCP connection: set up the device IP address.
Admin 7.3 30
Admin 9.2 31 [[image:1735234302538-838.png||data-xwiki-image-style-alignment="center" height="248" width="450"]]
32
Admin 10.2 33 When connected, the device asks for an access password.
Admin 1.1 34
Admin 10.2 35 Here is the list of available users:
36
Admin 10.4 37 |=User|=Default Password|=Permissions
Admin 10.3 38 |Guest|guest|Guest access only. No permissions to change any settings
Admin 10.4 39 |User|user|A common user access with permissions to change settings
40 |Service|service|
41 |Manufacturer|-|This account is used for internal
Admin 10.2 42
43 For the "User" account, the default password is "user" (without quotes).
44
Admin 5.1 45 [[image:1735053821120-339.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="468" width="600"]]
Admin 1.1 46
47 After successful authentication, the device will send settings and state profiles, which will be displayed as two tabs: "Settings" and "State":
48
Admin 5.1 49 [[image:1735053858994-348.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="468" width="600"]]
Admin 1.1 50
51 The monitor window is divided into three areas. The upper area displays controls for starting and stopping communication with the device, information about the device (its name, hardware and firmware versions, time on the device clock), and controls for performing actions with the device (change password, restart, reset, etc.).
52
53 The central area displays the parameters and state variables of the device. The tabs in this area are divided into three columns. The first column displays parameter groups in a tree form, the second column displays records for the selected group, and the third displays the detailed description of the record.
54
55 The lower area shows the history of device activity.