Skip to Content

Changes for page 3.1 General information

Last modified by Admin on 2025/03/27 15:20
From version 8.1
edited by Admin
on 2024/12/26 17:21
Change comment: There is no comment for this version
To version 7.3
edited by Admin
on 2024/12/26 17:18
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -6,28 +6,30 @@
6 6  
7 7  This document describes how to configure the BMS Main 3 device. Configuring can be done using the ElectricDeviceMonitor above the 1.18.0 (available by the [[link>>url:http://movicomelectric.com/wa-data/public/site/app/ElectricDeviceMonitorSETUP.exe]]) via
8 8  
9 -* USB;
10 -* CAN bus (Systec, PEAK, Marathon and USB-CAN adapters are supported);
11 -* TCP connection (BMS Wi-Fi or BMS LANmodule must be installed on BMS Main 3).
9 +USB, CAN bus (Systec, PEAK, Marathon and USB-CAN adapters are supported) or TCP connection (BMS Wi-Fi or BMS LANmodule must be installed on BMS Main 3).
12 12  
11 +The USB-miniUSB cable (connector X10) is used in this example to connect the BMS Main 3 device to a PC. After connecting, the device is identified as a device with a serial interface (COM port) as in the figure below:
13 13  
14 -After connecting device to the PC, launch ElectricDeviceMonitor, select "Unified monitor" in the main program window:
13 +[[image:1733320484262-545.png||data-xwiki-image-style-alignment="center" height="333" width="482"]]
15 15  
15 +To connect to the device, launch ElectricDeviceMonitor, select "Unified monitor" in the main program window:
16 +
16 16  [[image:1735233230234-960.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="340" width="450"]]
17 17  
18 18  Choose the connection type and set up connection settings:
19 19  
20 -* Serial port (USB): choose the corresponding COM port;
21 +* Serial port (USB)
21 21  
22 -[[image:1733320484262-545.png||data-xwiki-image-style-alignment="center" height="311" width="450"]][[image:1733320484267-118.png||data-xwiki-image-style-alignment="center" height="248" width="450"]]
23 +[[image:1733320484267-118.png||data-xwiki-image-style-alignment="center" height="248" width="450"]]
23 23  
24 24  * Systec USB-CAN, PEAK USB-CAN, Marathon USB-CAN, BMS USB-CAN: select the device in device list, specify the CAN speed and BMS device address:
25 25  
26 26  [[image:1735233434987-983.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="248" width="450"]]
27 27  
28 -* TCP connection: set up the device IP address.
29 +TCP connection: set the device IP address
29 29  
30 30  
32 +
31 31  When connected, the device asks for an access password. For the "User" account, the default password is "user" (without quotes).
32 32  
33 33  [[image:1735053821120-339.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="468" width="600"]]