Skip to Content
Last modified by Admin on 2025/03/18 12:51
From version 61.1
edited by Admin
on 2025/03/18 12:30
Change comment: There is no comment for this version
To version 56.2
edited by Admin
on 2025/03/18 11:53
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,15 +1,9 @@
1 1  (% data-numbered-headings-start="2" style="--numbered-headings-start: 1;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
2 2  = Installation and connection =
3 3  
4 -== Safety rules ==
5 -
6 -To perform the protection functions, the BMS must be able to disconnect the battery from the load and charger. To do this, **at least one contactor** able to break the load and charge circuits must be connected to the BMS.
7 -
8 -Before use, **configure the system**. Proper operation of the BMS is possible only if it is correctly configured.
9 -
10 10  (% class="box warningmessage" %)
11 11  (((
12 -The BMS can be connected to batteries with life-threatening and health-hazardous voltage levels. When working with high-voltage batteries, observe electrical safety regulations, use safety glasses, protective clothing, insulated tools and appliances. To prevent the damage of device avoid electrostatic discharges while working with the battery.
6 +The BMS can connect to batteries with voltage levels dangerous to life and health. When working with high voltage batteries, follow electrical safety rules, use safety glasses, protective clothing, insulated tools and devices.
13 13  )))
14 14  
15 15  (% class="box errormessage" %)
... ... @@ -384,6 +384,18 @@
384 384  
385 385  == Connection procedure ==
386 386  
381 +The BMS can connect to batteries with voltage levels dangerous to life and health. When working with high voltage batteries, follow electrical safety rules, use safety glasses, protective clothing, insulated tools and devices.
382 +
383 +(% class="box errormessage" %)
384 +(((
385 +**The system is not designed to operate with batteries with total voltage more than 3000V.**
386 +)))
387 +
388 +(% class="box warningmessage" %)
389 +(((
390 +Before connection, configure the device (see [[Settings>>doc:Battery management systems.BMS Main 3.3\. Configuration.WebHome]]). Correct operation of the BMS system is only possible with correct configuration.
391 +)))
392 +
387 387  All operations to connect the device must be carried out with the supply voltage removed.
388 388  
389 389  * Connect the power contactors to header X2.