Skip to Content
Last modified by Admin on 2025/03/18 12:51
From version 45.1
edited by Admin
on 2025/02/06 11:33
Change comment: There is no comment for this version
To version 40.1
edited by Admin
on 2024/12/12 16:28
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -13,8 +13,6 @@
13 13  |Overall dimensions (length × width × height), mm|200 × 123 × 12
14 14  |Mounting dimensions (length × width), mm|194 × 114
15 15  |Mounting holes|M3
16 -|Headers type X1-X9|Hirose ZE05
17 -|Headers type X11-X14|Molex series Mocro-Fit
18 18  
19 19  == Headers ==
20 20  
... ... @@ -212,7 +212,7 @@
212 212  
213 213  === X10 – miniUSB connector ===
214 214  
215 -The miniUSB connector is used to configure the parameters of the BMS Main 3 / BMS Main 3X device.
213 +The miniUSB connector is used to configure the parameters of the BMS Main 3  device.
216 216  
217 217  === X11 – header for high-voltage bus before contactors (plus) ===
218 218  
... ... @@ -296,7 +296,7 @@
296 296  
297 297  === J5, J6 – jumpers for emergency opening of contactors when removing discrete input signals DIN7, DIN8 ===
298 298  
299 -The BMS Main 3 / BMS Main 3X device implements a circuit for hardware opening of power contactors when the discrete input signal DIN7 and/or DIN8 (voltage level 9-32V) is removed. To enable this function, jumper J5 and/or J6 must be installed.
297 +The BMS Main 3 device implements a circuit for hardware opening of power contactors when the discrete input signal DIN7 and/or DIN8 (voltage level 9-32V) is removed. To enable this function, jumper J5 and/or J6 must be installed.
300 300  
301 301  == Indicators ==
302 302  
... ... @@ -340,7 +340,7 @@
340 340  
341 341  (% class="box warningmessage" %)
342 342  (((
343 -Before connection, configure the device (see [[Settings>>doc:Battery management systems.BMS Main 3.3\. Configuration.WebHome]]). Correct operation of the BMS system is only possible with correct configuration.
341 +Before connection, configure the device (see [[Settings>>doc:Battery management systems.BMS Main 3.3\. Settings.WebHome]]). Correct operation of the BMS system is only possible with correct configuration.
344 344  )))
345 345  
346 346  All operations to connect the device must be carried out with the supply voltage removed.