Skip to Content
Last modified by Admin on 2025/03/18 12:51
From version 40.1
edited by Admin
on 2024/12/12 16:28
Change comment: There is no comment for this version
To version 42.1
edited by Admin
on 2024/12/12 16:32
Change comment: Renamed back-links.

Summary

Details

Page properties
Content
... ... @@ -210,7 +210,7 @@
210 210  
211 211  === X10 – miniUSB connector ===
212 212  
213 -The miniUSB connector is used to configure the parameters of the BMS Main 3  device.
213 +The miniUSB connector is used to configure the parameters of the BMS Main 3 / BMS Main 3X device.
214 214  
215 215  === X11 – header for high-voltage bus before contactors (plus) ===
216 216  
... ... @@ -294,7 +294,7 @@
294 294  
295 295  === J5, J6 – jumpers for emergency opening of contactors when removing discrete input signals DIN7, DIN8 ===
296 296  
297 -The BMS Main 3 device implements a circuit for hardware opening of power contactors when the discrete input signal DIN7 and/or DIN8 (voltage level 9-32V) is removed. To enable this function, jumper J5 and/or J6 must be installed.
297 +The BMS Main 3 / BMS Main 3X device implements a circuit for hardware opening of power contactors when the discrete input signal DIN7 and/or DIN8 (voltage level 9-32V) is removed. To enable this function, jumper J5 and/or J6 must be installed.
298 298  
299 299  == Indicators ==
300 300  
... ... @@ -338,7 +338,7 @@
338 338  
339 339  (% class="box warningmessage" %)
340 340  (((
341 -Before connection, configure the device (see [[Settings>>doc:Battery management systems.BMS Main 3.3\. Settings.WebHome]]). Correct operation of the BMS system is only possible with correct configuration.
341 +Before connection, configure the device (see [[Settings>>doc:Battery management systems.BMS Main 3.3\. Configuration.WebHome]]). Correct operation of the BMS system is only possible with correct configuration.
342 342  )))
343 343  
344 344  All operations to connect the device must be carried out with the supply voltage removed.