Skip to Content
Last modified by Admin on 2025/03/18 12:51
From version 38.1
edited by Admin
on 2024/12/12 16:21
Change comment: There is no comment for this version
To version 55.3
edited by Admin
on 2025/02/20 13:10
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -3,7 +3,7 @@
3 3  
4 4  == Installation procedure ==
5 5  
6 -The mounting location of the BMS Main 3 device must be protected from mechanical particles (dust, dirt, large objects) and water. The installation location must provide easy access for subsequent connection to the device connectors.
6 +The mounting location of the BMS Main 3 / BMS Main 3X device must be protected from mechanical particles (dust, dirt, large objects) and water. The installation location must provide easy access for subsequent connection to the device connectors.
7 7  
8 8  Overall and mounting dimensions are shown in figure below.
9 9  
... ... @@ -16,7 +16,7 @@
16 16  
17 17  == Headers ==
18 18  
19 -The location and designation of connectors on the BMS Main 3 device are shown below.
19 +The location and designation of connectors on the BMS Main 3 / BMS Main 3X device are shown below.
20 20  
21 21  (% contenteditable="false" tabindex="-1" %)
22 22  (((
... ... @@ -31,6 +31,8 @@
31 31  
32 32  === X1 – header to power the device ===
33 33  
34 +Receptacle Housing: Hirose ZE05-8DS-HU/R. Terminals: Hirose ZE05-2022SCF
35 +
34 34  (% class="wikigeneratedid" id="H" %)
35 35  (% data-widget="image" contenteditable="false" tabindex="-1" %)[[image:1732121673277-246.png||data-xwiki-image-style-alignment="center" height="85" width="200"]]
36 36  
... ... @@ -46,6 +46,8 @@
46 46  
47 47  === X2 – header for contactors ===
48 48  
51 +Receptacle Housing: Hirose ZE05-12DS-HU/R. Terminals: Hirose ZE05-2022SCF
52 +
49 49  (% aria-label="1732121695049-411.png image widget" data-widget="image" contenteditable="false" role="region" tabindex="-1" %)[[image:1732121695049-411.png||data-xwiki-image-style-alignment="center" height="87" width="267"]](% title="Click and drag to resize" %)​
50 50  
51 51  |**Pin**|**Name**|**Description**
... ... @@ -63,6 +63,8 @@
63 63  
64 64  === (% title="Click and drag to resize" %)​(%%)X3 – header for discrete inputs and outputs ===
65 65  
70 +Receptacle Housing: Hirose ZE05-24DS-HU/R. Terminals: Hirose ZE05-2022SCF
71 +
66 66  (% aria-label="1732121811285-182.png image widget" data-widget="image" contenteditable="false" role="region" tabindex="-1" %)[[image:1732121811285-182.png||data-xwiki-image-style-alignment="center" height="94" width="531"]]
67 67  
68 68  |**Pin**|**Name**|**Description**
... ... @@ -88,8 +88,12 @@
88 88  
89 89  (% aria-label="1732121926812-202.png image widget" data-widget="image" contenteditable="false" role="region" tabindex="-1" %)[[image:1732121926812-202.png||data-xwiki-image-style-alignment="center" height="76" width="242"]](% title="Click and drag to resize" %)​(%%)Connection diagram for discrete output:
90 90  
97 +[[image:1739361269041-663.png||data-xwiki-image-style-alignment="center" height="93" width="275"]]
98 +
91 91  === X4 – header for HVIL ===
92 92  
101 +Receptacle Housing: Hirose ZE05-4S-HU/R. Terminals: Hirose ZE05-2022SCF
102 +
93 93  [[image:1732122015188-642.png||data-xwiki-image-style-alignment="center" height="64" width="150"]]
94 94  
95 95  |**Pin**|**Name**|**Description**
... ... @@ -98,12 +98,16 @@
98 98  |**3**|**HVIL_IN**|Input of the current measurement circuit in the current loop (higher potential, measuring shunt input)
99 99  |**4**|**HVIL_PWR**|Current loop power supply (max 5V, 25mA)
100 100  
101 - If the BMS Main 3 device generates current in a current loop, the current loop must be connected to the **HVIL_PWR** and **HVIL_IN** pins. If BMS Main 3 is a passive current loop meter, then the current loop must be connected to the **HVIL_IN** and **HVIL_OUT** pins.
111 + If the BMS Main 3 / BMS Main 3X device generates current in a current loop, the current loop must be connected to the **HVIL_PWR** and **HVIL_IN** pins. If BMS Main 3 / BMS Main 3X is a passive current loop meter, then the current loop must be connected to the **HVIL_IN** and **HVIL_OUT** pins.
102 102  
103 103  Connection diagram to the current loop:
104 104  
115 +[[image:1739361367866-742.png||data-xwiki-image-style-alignment="center" height="210" width="281"]]
116 +
105 105  === X5 – header for current and temperature sensors ===
106 106  
119 +Receptacle Housing: Hirose ZE05-16DS-HU/R. Terminals: Hirose ZE05-2022SCF
120 +
107 107  [[image:1733311958053-469.png||data-xwiki-image-style-alignment="center" height="83" width="349"]]
108 108  
109 109  (% style="width:539px" %)
... ... @@ -135,6 +135,8 @@
135 135  
136 136  === X6 – header for CAN1 and RS-485-1 (external buses) ===
137 137  
152 +Receptacle Housing: Hirose ZE05-5S-HU/R. Terminals: Hirose ZE05-2022SCF
153 +
138 138  [[image:1733316218666-814.png||data-xwiki-image-style-alignment="center" height="55" width="162"]]
139 139  
140 140  |**Pin**|**Name**|**Description**
... ... @@ -154,6 +154,8 @@
154 154  
155 155  === X7 – header for CAN2 (internal bus) ===
156 156  
173 +Receptacle Housing: Hirose ZE05-4S-HU/R. Terminals: Hirose ZE05-2022SCF
174 +
157 157  [[image:1733316517741-698.png||data-xwiki-image-style-alignment="center" height="59" width="144"]]
158 158  
159 159  |**Pin**|**Name**|**Description**
... ... @@ -168,6 +168,8 @@
168 168  
169 169  === X8 – header for CAN3 ===
170 170  
189 +Receptacle Housing: Hirose ZE05-4S-HU/R. Terminals: Hirose ZE05-2022SCF
190 +
171 171  [[image:1733316517741-698.png||data-xwiki-image-style-alignment="center" height="59" width="144"]]
172 172  
173 173  |**Pin**|**Name**|**Description**
... ... @@ -182,15 +182,15 @@
182 182  CAN3 operates differently depending on used firmware:
183 183  
184 184  * **BMS Main 3:** CAN3 bus is reserved;
185 -* **BMS Main 3X:** CAN3 bus is used to connect with BMS Main 3 inside parallel strings.
205 +* **BMS Main 3X:** CAN3 bus is used to connect with BMS Main 3 inside parallel strings. Diagram for connecting battery modules to the CAN3 bus:
186 186  
187 -Diagram for connecting battery modules to the CAN3 bus:
188 -
189 189  [[image:1733316622613-181.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="153" width="417"]]
190 190  )))
191 191  
192 192  === X9 – header for BMS Logic (RS-485-2) ===
193 193  
212 +Receptacle Housing: Hirose ZE05-4S-HU/R. Terminals: Hirose ZE05-2022SCF
213 +
194 194  [[image:1733316517741-698.png||data-xwiki-image-style-alignment="center" height="59" width="144"]]
195 195  
196 196  |**Pin**|**Name**|**Description**
... ... @@ -199,16 +199,25 @@
199 199  |**3**|**GND**|Ground
200 200  |**4**|**LOGIC_5V**|BMS Logic power line (+5V, max 400mA)
201 201  
202 -Connection diagram for BMS Logic devices:
222 +(% class="box infomessage" %)
223 +(((
224 +**Note:**
225 +RS-485-2 operates differently depending on used firmware:
203 203  
204 -[[image:1733316674363-604.png||data-xwiki-image-style-alignment="center" height="163" width="400"]]
227 +* **BMS Main 3X:** RS-485-2 bus is reserved;
228 +* **BMS Main 3:** RS-485-2 bus is used to connect with BMS Logics in a battery pack. Connection diagram for BMS Logic devices:
205 205  
230 +[[image:1733316674363-604.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="163" width="400"]]
231 +)))
232 +
206 206  === X10 – miniUSB connector ===
207 207  
208 -The miniUSB connector is used to configure the parameters of the BMS Main 3 device.
235 +The miniUSB connector is used to configure the parameters of the BMS Main 3 / BMS Main 3X device.
209 209  
210 210  === X11 – header for high-voltage bus before contactors (plus) ===
211 211  
239 +Receptacle Housing: Molex 436450200. Terminals: Molex 43030
240 +
212 212  [[image:1733316780753-798.png||data-xwiki-image-style-alignment="center" height="60" width="91"]]
213 213  
214 214  |**Pin**|**Name**|**Description**
... ... @@ -222,6 +222,8 @@
222 222  
223 223  === X12 – header for high-voltage bus before contactors (minus) ===
224 224  
254 +Receptacle Housing: Molex 436450200. Terminals: Molex 43030
255 +
225 225  [[image:1733316843397-336.png||data-xwiki-image-style-alignment="center" height="53" width="79"]]
226 226  
227 227  |**Pin**|**Name**|**Description**
... ... @@ -235,6 +235,8 @@
235 235  
236 236  === X13 – header for high-voltage bus after contactors (plus) ===
237 237  
269 +Receptacle Housing: Molex 436450200. Terminals: Molex 43030
270 +
238 238  [[image:1733316780753-798.png||data-xwiki-image-style-alignment="center" height="60" width="91"]]
239 239  
240 240  |**Pin**|**Name**|**Description**
... ... @@ -248,6 +248,8 @@
248 248  
249 249  === X14 – header for high-voltage bus after contactors (minus) ===
250 250  
284 +Receptacle Housing: Molex 436450200. Terminals: Molex 43030
285 +
251 251  [[image:1733316843397-336.png||data-xwiki-image-style-alignment="center" height="53" width="79"]]
252 252  
253 253  |**Pin**|**Name**|**Description**
... ... @@ -289,7 +289,7 @@
289 289  
290 290  === J5, J6 – jumpers for emergency opening of contactors when removing discrete input signals DIN7, DIN8 ===
291 291  
292 -The BMS Main 3 device implements a circuit for hardware opening of power contactors when the discrete input signal DIN7 and/or DIN8 (voltage level 9-32V) is removed. To enable this function, jumper J5 and/or J6 must be installed.
327 +The BMS Main 3 / BMS Main 3X device implements a circuit for hardware opening of power contactors when the discrete input signal DIN7 and/or DIN8 (voltage level 9-32V) is removed. To enable this function, jumper J5 and/or J6 must be installed.
293 293  
294 294  == Indicators ==
295 295  
... ... @@ -305,17 +305,19 @@
305 305  |**Blinking green**|Executing the battery management program
306 306  |**No blinking**|Program execution error
307 307  
308 -=== DS3 – LED indicating interaction with BMS Logic ===
343 +=== DS3 – LED indicating interaction with child devices ===
309 309  
310 -|**State**|**Description**
311 -|**Blinking yellow**|The device interacts with BMS Logic devices
312 -|**No blinking**|-
345 +(% style="width:447px" %)
346 +|**State**|(% style="width:166px" %)**Description (Main 3)**|(% style="width:168px" %)**Description (Main 3X)**
347 +|**Blinking yellow**|(% style="width:166px" %)The device interacts with BMS Logic devices|(% style="width:168px" %)The device interacts with BMS Main 3 devices
348 +|**No blinking**|(% style="width:166px" %)-|(% style="width:168px" %)-
313 313  
314 -=== DS4 – LED indicating loss of connection with BMS Logic ===
350 +=== DS4 – LED indicating loss of connection with child devices ===
315 315  
316 -|**State**|**Description**
317 -|**Blinking/lights up red**|Communication with one or more BMS Logic devices is lost
318 -|**No blinking**|Communication with BMS Logic is stable
352 +(% style="width:601px" %)
353 +|**State**|(% style="width:220px" %)**Description (Main 3)**|(% style="width:218px" %)**Description (Main 3X)**
354 +|**Blinking/lights up red**|(% style="width:220px" %)Communication with one or more BMS Logic devices is lost|(% style="width:218px" %)Communication with one or more BMS Main 3 devices is lost
355 +|**No blinking**|(% style="width:220px" %)Communication with BMS Logic devices is stable|(% style="width:218px" %)Communication with BMS Main 3 devices is stable
319 319  
320 320  === DS5-DS10 – LEDs indicating contactor switches 1-6 ===
321 321  
... ... @@ -331,9 +331,16 @@
331 331  
332 332  == Connection procedure ==
333 333  
371 +The BMS can connect to batteries with voltage levels dangerous to life and health. When working with high voltage batteries, follow electrical safety rules, use safety glasses, protective clothing, insulated tools and devices.
372 +
373 +(% class="box errormessage" %)
374 +(((
375 +**The system is not designed to operate with batteries with total voltage more than 3000V.**
376 +)))
377 +
334 334  (% class="box warningmessage" %)
335 335  (((
336 -Before connection, configure the device (see [[Settings>>doc:Battery management systems.BMS Main 3.3\. Settings.WebHome]]). Correct operation of the BMS system is only possible with correct configuration.
380 +Before connection, configure the device (see [[Settings>>doc:Battery management systems.BMS Main 3.3\. Configuration.WebHome]]). Correct operation of the BMS system is only possible with correct configuration.
337 337  )))
338 338  
339 339  All operations to connect the device must be carried out with the supply voltage removed.
... ... @@ -346,5 +346,5 @@
346 346  * Connect the high-voltage network integrity circuit (if necessary) to header X4.
347 347  * Connect external devices (if necessary) to header X6.
348 348  * Connect other devices (BMS Indication, BMS Display, if necessary) to header X7.
349 -* If the BMS Main 3 is the last device on the RS-485-1, CAN1, or CAN2 bus, install jumpers J1-J3.
393 +* If the BMS Main 3 / BMS Main 3X is the last device on the RS-485-1, CAN1, or CAN2 bus, install jumpers J1-J3.
350 350  * Connect an external power supply to header X1. The device will start when there is a 9-32V power supply and one of the KEYRUN or CHARGE_ON signals with a voltage of more than 8.5V is supplied.
1739361236606-576.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +7.8 KB
Content
1739361269041-663.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +9.0 KB
Content
1739361333964-462.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +15.2 KB
Content
1739361367866-742.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +21.1 KB
Content