Skip to Content
Last modified by Admin on 2026/04/02 13:49
From version 59.1
edited by Admin
on 2025/03/18 12:15
Change comment: There is no comment for this version
To version 82.1
edited by Admin
on 2026/03/25 16:34
Change comment: Uploaded new attachment "1732198827034-560.png", version {1}

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -Battery management systems.BMS Main 3.WebHome
1 +drafts.BMS Main 2R.WebHome
Content
... ... @@ -3,13 +3,11 @@
3 3  
4 4  == Safety rules ==
5 5  
6 -To perform the protection functions, the BMS must be able to disconnect the battery from the load and charger. To do this, at least one contactor able to break the load and charge circuits must be connected to the BMS.
6 +To perform the protection functions, the BMS must be able to disconnect the battery from the load and charger. To do this, **at least one contactor** able to break the load and charge circuits must be connected to the BMS.
7 7  
8 8  Before use, **configure the system**. Proper operation of the BMS is possible only if it is correctly configured.
9 9  
10 -It is not recommended to use the system in batteries formed by several series of cells connected in parallel. To increase capacity, it is recommended to connect several cells in parallel groups, and then connect the groups in series.
11 -
12 -(% class="box warningmessage" %)
10 +(% class="box errormessage" %)
13 13  (((
14 14  The BMS can be connected to batteries with life-threatening and health-hazardous voltage levels. When working with high-voltage batteries, observe electrical safety regulations, use safety glasses, protective clothing, insulated tools and appliances. To prevent the damage of device avoid electrostatic discharges while working with the battery.
15 15  )))
... ... @@ -16,29 +16,29 @@
16 16  
17 17  (% class="box errormessage" %)
18 18  (((
19 -**The system is not designed to operate with batteries whose total voltage exceeds 3000 V.**
17 +The system is not designed to operate with batteries whose total voltage exceeds 3000 V.
20 20  )))
21 21  
22 22  == Installation procedure ==
23 23  
24 -The mounting location of the BMS Main 3 / BMS Main 3X device must be protected from mechanical particles (dust, dirt, large objects) and water. The installation location must provide easy access for subsequent connection to the device connectors.
22 +The mounting location of the BMS Main 2R device must be protected from mechanical particles (dust, dirt, large objects) and water. The installation location must provide easy access for subsequent connection to the device connectors.
25 25  
26 26  Overall and mounting dimensions are shown in figure below.
27 27  
28 -(% data-widget="image" contenteditable="false" tabindex="-1" %)[[image:1733311711953-224.png||data-xwiki-image-style-alignment="center" height="566" width="775"]](% title="Click and drag to resize" %)​
26 +[[image:1774349658793-888.0b.STEP.JPG||data-xwiki-image-style-alignment="center" height="522" width="450"]](% title="Click and drag to resize" %)​
29 29  
30 30  |**Parameter**|**Value**
31 -|Overall dimensions (length × width × height), mm|200 × 123 × 12
32 -|Mounting dimensions (length × width), mm|194 × 114
29 +|Overall dimensions (length × width × height), mm|120 × 120 × 16
30 +|Mounting dimensions (length × width), mm|114 × 114
33 33  |Mounting holes|M3
34 34  
35 35  == Headers ==
36 36  
37 -The location and designation of connectors on the BMS Main 3 / BMS Main 3X device are shown below.
35 +The location and designation of connectors on the BMS Main 2R device are shown below.
38 38  
39 39  (% contenteditable="false" tabindex="-1" %)
40 40  (((
41 -[[image:1732119505664-787.png||data-xwiki-image-style-alignment="center" height="417" width="684"]]
39 +[[image:1774455018488-627.png||data-xwiki-image-style-alignment="center"]]
42 42  )))
43 43  
44 44  (% class="box warningmessage" %)
... ... @@ -47,37 +47,37 @@
47 47  All headers are shown from the device side!
48 48  )))
49 49  
50 -=== X1 – header to power the device ===
48 +=== X1 – header for discrete inputs and outputs ===
51 51  
52 52  Receptacle Housing: Hirose ZE05-8DS-HU/R. Terminals: Hirose ZE05-2022SCF
53 53  
54 54  (% class="wikigeneratedid" id="H" %)
55 -(% data-widget="image" contenteditable="false" tabindex="-1" %)[[image:1732121673277-246.png||data-xwiki-image-style-alignment="center" height="85" width="200"]]
53 +[[image:1732198937514-731.png||data-xwiki-image-style-alignment="center" height="85" width="272"]]
56 56  
57 57  |**Pin**|**Name**|**Description**
58 -|**1–2, 5–6**|**GND**|Ground
59 -|**3**|**KEYRUN**|Power-on signal
60 -|**4**|**CHARGE_ON**|Power-on signal (battery charge requirement)
61 -|**7–8**|**VIN**|Power line (9-32V)
56 +|**1–8**|**GND**|Ground
57 +|**9**|**DO_1**|Discrete output 1 (+5V, 20mA)
58 +|**10**|**DO_2**|Discrete output 2 (+5V, 20mA)
59 +|**11**|**DO_3**|Discrete output 3 (+5V, 20mA)
60 +|**12**|**DO_4**|Discrete output 4 (+5V, 20mA)
61 +|**13**|**DI_4**|Discrete input 4 (“dry contact”, +5V)
62 +|**14**|**DI_3**|Discrete input 3 (“dry contact”, +5V)
63 +|**15**|**DI_2**|Discrete input 2 (“dry contact”, +5V)
64 +|**16**|**DI_1**|Discrete input 1 (“dry contact”, +5V)
62 62  
63 -Power supply connection diagram:
64 64  
65 -(% aria-label="1732120054870-496.png image widget" data-widget="image" contenteditable="false" role="region" tabindex="-1" %)[[image:1732120054870-496.png||data-xwiki-image-style-alignment="center" height="169" width="327"]]
66 66  
67 -=== X2 – header for contactors ===
68 +=== X2 – ===
68 68  
69 -Receptacle Housing: Hirose ZE05-12DS-HU/R. Terminals: Hirose ZE05-2022SCF
70 +=== P1 – header for power supply ===
70 70  
71 -(% aria-label="1732121695049-411.png image widget" data-widget="image" contenteditable="false" role="region" tabindex="-1" %)[[image:1732121695049-411.png||data-xwiki-image-style-alignment="center" height="87" width="267"]](% title="Click and drag to resize" %)​
72 +Receptacle Housing: Molex 39012020. Terminals: Molex 5556
72 72  
74 +[[image:https://docs.movicomelectric.com/bin/download/Battery%20management%20systems/BMS%20Main%202.1/2.%20Installation%20and%20connection/WebHome/1732198827034-560.png?width=41&height=78&rev=1.1||alt="1732198827034-560.png" height="78" width="41"]]
75 +
73 73  |**Pin**|**Name**|**Description**
74 -|**1–4, 8–9**|**GND**|Ground
75 -|**5**|**CONT1_OUT**|Contactor control 1 (plus)
76 -|**6**|**CONT2_OUT**|Contactor control 2 (plus)
77 -|**7**|**CONT3_OUT**|Contactor control 3 (plus)
78 -|**10**|**CONT4_OUT**|Contactor control 4 (plus)
79 -|**11**|**CONT5_OUT**|Contactor control 5 (plus)
80 -|**12**|**CONT6_OUT**|Contactor control 6 (plus)
77 +|**1**|**GND**|Ground
78 +|**2**|**V+**|Supply voltage 9-30V
81 81  
82 82   Contactor connection diagram:
83 83  
... ... @@ -126,7 +126,7 @@
126 126  |**3**|**HVIL_IN**|Input of the current measurement circuit in the current loop (higher potential, measuring shunt input)
127 127  |**4**|**HVIL_PWR**|Current loop power supply (max 5V, 25mA)
128 128  
129 - If the BMS Main 3 / BMS Main 3X device generates current in a current loop, the current loop must be connected to the **HVIL_PWR** and **HVIL_IN** pins. If BMS Main 3 / BMS Main 3X is a passive current loop meter, then the current loop must be connected to the **HVIL_IN** and **HVIL_OUT** pins.
127 + If the BMS Main 2R device generates current in a current loop, the current loop must be connected to the **HVIL_PWR** and **HVIL_IN** pins. If BMS Main 2R is a passive current loop meter, then the current loop must be connected to the **HVIL_IN** and **HVIL_OUT** pins.
130 130  
131 131  Connection diagram to the current loop:
132 132  
... ... @@ -250,7 +250,7 @@
250 250  
251 251  === X10 – miniUSB connector ===
252 252  
253 -The miniUSB connector is used to configure the parameters of the BMS Main 3 / BMS Main 3X device.
251 +The miniUSB connector is used to configure the parameters of the BMS Main 2R device.
254 254  
255 255  === X11 – header for high-voltage bus before contactors (plus) ===
256 256  
... ... @@ -342,7 +342,7 @@
342 342  
343 343  === J5, J6 – jumpers for emergency opening of contactors when removing discrete input signals DIN7, DIN8 ===
344 344  
345 -The BMS Main 3 / BMS Main 3X device implements a circuit for hardware opening of power contactors when the discrete input signal DIN7 and/or DIN8 (voltage level 9-32V) is removed. To enable this function, jumper J5 and/or J6 must be installed.
343 +The BMS Main 2R device implements a circuit for hardware opening of power contactors when the discrete input signal DIN7 and/or DIN8 (voltage level 9-32V) is removed. To enable this function, jumper J5 and/or J6 must be installed.
346 346  
347 347  == Indicators ==
348 348  
... ... @@ -396,5 +396,5 @@
396 396  * Connect the high-voltage network integrity circuit (if necessary) to header X4.
397 397  * Connect external devices (if necessary) to header X6.
398 398  * Connect other devices (BMS Indication, BMS Display, if necessary) to header X7.
399 -* If the BMS Main 3 / BMS Main 3X is the last device on the RS-485-1, CAN1, or CAN2 bus, install jumpers J1-J3.
397 +* If the BMS Main 2R is the last device on the RS-485-1, CAN1, or CAN2 bus, install jumpers J1-J3.
400 400  * Connect an external power supply to header X1. The device will start when there is a 9-32V power supply and one of the KEYRUN or CHARGE_ON signals with a voltage of more than 8.5V is supplied.
1731517180930-597.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +5.5 KB
Content
1731517188900-976.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +3.1 KB
Content
1731517195672-298.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +3.2 KB
Content
1732198827034-560.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +1.2 KB
Content
1732198890482-787.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 KB
Content
1732198896526-660.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
1732198937514-731.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +6.6 KB
Content
1741620022836-867.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +9.7 KB
Content
1774349658793-888.0b.STEP.JPG
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +42.2 KB
Content
1774453953377-602.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +7.8 KB
Content
1774455018488-627.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +35.6 KB
Content