Changes for page 5.2 Modbus protocol

Summary

• Page properties (3 modified, 0 added, 0 removed)

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-4.2 Modbus protocol
	1	+5.2 Modbus protocol

Parent

...	...	@@ -1,1 +1,1 @@
1		-drafts.bms-main-2.WebHome
	1	+Battery management systems.BMS Main 2\.1 (End-of-Life).5\. Communication protocols.WebHome

Content

...	...	@@ -1,5 +1,11 @@
1		-== 4.2.1 General information ==
	1	+(% data-numbered-headings-start="5" style="--numbered-headings-start: 4;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
	2	+= Communication protocols =
2	2
	4	+(% data-numbered-headings-start="2" style="--numbered-headings-start: 1;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
	5	+== Modbus protocol ==
	6	+
	7	+=== General information ===
	8	+
3	3	The BMS Main 2.x device provides the information about the battery system using Modbus protocol. The BMS is a Modbus-server and it responds to the Modbus-client’s commands.
4	4
5	5	Interaction with the device is performed over the RS-485 bus (Modbus RTU) or the Ethernet network (Modbus TCP).
...	...	@@ -28,17 +28,18 @@
28	28
29	29	Words are in the **little endian**.
30	30
31		-== 4.2.2 Input registers ==
	37	+=== Input registers ===
32	32
33		-|(% style="width:137px" %)**Register address**|(% style="width:139px" %)**Number of registers**|(% style="width:805px" %)**Content**|(% style="width:124px" %)**Type**
34		-|(% style="width:137px" %)**0x0000**|(% style="width:139px" %)1|(% style="width:805px" %)(((
	39	+(% style="width:651px" %)
	40	+|(% style="width:92px" %)**Register address**|(% style="width:94px" %)**Number of registers**|(% style="width:368px" %)**Content**|(% style="width:96px" %)**Type**
	41	+|(% style="width:92px" %)**0x0000**|(% style="width:94px" %)1|(% style="width:368px" %)(((
35	35	Hardware version:
36	36
37	37	byte 0 — minor;
38	38
39	39	byte 1 — major.
40		-)))|(% style="width:124px" %)U8[2]
41		-|(% style="width:137px" %)**0x0001-0x0002**|(% style="width:139px" %)2|(% style="width:805px" %)(((
	47	+)))|(% style="width:96px" %)U8[2]
	48	+|(% style="width:92px" %)**0x0001-0x0002**|(% style="width:94px" %)2|(% style="width:368px" %)(((
42	42	Firmware version:
43	43
44	44	byte 0 — patch;
...	...	@@ -48,8 +48,8 @@
48	48	byte 2 — major;
49	49
50	50	byte 3 — not used (set to 0).
51		-)))|(% style="width:124px" %)U8[4]
52		-|(% style="width:137px" %)**0x0003-0x0004**|(% style="width:139px" %)2|(% style="width:805px" %)(((
	58	+)))|(% style="width:96px" %)U8[4]
	59	+|(% style="width:92px" %)**0x0003-0x0004**|(% style="width:94px" %)2|(% style="width:368px" %)(((
53	53	Bootloader version:
54	54
55	55	byte 0 — patch;
...	...	@@ -59,8 +59,8 @@
59	59	byte 2 — major;
60	60
61	61	byte 3 — not used (set to 0).
62		-)))|(% style="width:124px" %)U8[4]
63		-|(% style="width:137px" %)**0x1000-0x1003**|(% style="width:139px" %)3|(% style="width:805px" %)(((
	69	+)))|(% style="width:96px" %)U8[4]
	70	+|(% style="width:92px" %)**0x1000-0x1003**|(% style="width:94px" %)3|(% style="width:368px" %)(((
64	64	Current time on the device clock:
65	65
66	66	byte 0 — day (BCD);
...	...	@@ -74,8 +74,8 @@
74	74	byte 4 — minutes (BCD);
75	75
76	76	byte 5 — seconds (BCD).
77		-)))|(% style="width:124px" %)U8[6]
78		-|(% style="width:137px" %)**0x2000**|(% style="width:139px" %)1|(% style="width:805px" %)(((
	84	+)))|(% style="width:96px" %)U8[6]
	85	+|(% style="width:92px" %)**0x2000**|(% style="width:94px" %)1|(% style="width:368px" %)(((
79	79	Discrete input signals 1 (bitfield):
80	80
81	81	bit 0 — "Battery cover";
...	...	@@ -109,11 +109,11 @@
109	109	bit 14 – “Interlock”;
110	110
111	111	bit 15 – “Fuse 1”.
112		-)))|(% style="width:124px" %)U16
113		-|(% style="width:137px" %)**0x2001-0x2002**|(% style="width:139px" %)2|(% style="width:805px" %)Current measured by the primary sensor, А|(% style="width:124px" %)REAL32
114		-|(% style="width:137px" %)**0x2003-0x2004**|(% style="width:139px" %)2|(% style="width:805px" %)External temperature, °C|(% style="width:124px" %)REAL32
115		-|(% style="width:137px" %)**0x2005-0x2006**|(% style="width:139px" %)2|(% style="width:805px" %)Humidity, RH%|(% style="width:124px" %)REAL32
116		-|(% style="width:137px" %)**0x2007-0x2008**|(% style="width:139px" %)2|(% style="width:805px" %)(((
	119	+)))|(% style="width:96px" %)U16
	120	+|(% style="width:92px" %)**0x2001-0x2002**|(% style="width:94px" %)2|(% style="width:368px" %)Current measured by the primary sensor, А|(% style="width:96px" %)REAL32
	121	+|(% style="width:92px" %)**0x2003-0x2004**|(% style="width:94px" %)2|(% style="width:368px" %)External temperature, °C|(% style="width:96px" %)REAL32
	122	+|(% style="width:92px" %)**0x2005-0x2006**|(% style="width:94px" %)2|(% style="width:368px" %)Humidity, RH%|(% style="width:96px" %)REAL32
	123	+|(% style="width:92px" %)**0x2007-0x2008**|(% style="width:94px" %)2|(% style="width:368px" %)(((
117	117	Errors 1 (bitfield):
118	118
119	119	bit 0 – “Overcurrent”;
...	...	@@ -177,8 +177,8 @@
177	177	bit 29 – “Spirit offline”, connection with the Spirit truck is lost;
178	178
179	179	bits 30–31 – reserved.
180		-)))|(% style="width:124px" %)U32
181		-|(% style="width:137px" %)**0x2009-0x200A**|(% style="width:139px" %)2|(% style="width:805px" %)(((
	187	+)))|(% style="width:96px" %)U32
	188	+|(% style="width:92px" %)**0x2009-0x200A**|(% style="width:94px" %)2|(% style="width:368px" %)(((
182	182	Internal signals (bitfield):
183	183
184	184	bit 0 — "Low SOC";
...	...	@@ -233,9 +233,13 @@
233	233
234	234	bit 25 – “Power up”;
235	235
236		-bits 26-31 – reserved.
237		-)))|(% style="width:124px" %)U32
238		-|(% style="width:137px" %)**0x200B**|(% style="width:139px" %)1|(% style="width:805px" %)(((
	243	+bit 26 — signal “External 1”;
	244	+
	245	+bit 27 — signal “Heater (AUX)”;
	246	+
	247	+bits 28-31 — not used.
	248	+)))|(% style="width:96px" %)U32
	249	+|(% style="width:92px" %)**0x200B**|(% style="width:94px" %)1|(% style="width:368px" %)(((
239	239	Discrete output signals (bitfield):
240	240
241	241	bit 0 — state of the output #1;
...	...	@@ -247,8 +247,8 @@
247	247	bit 3 — state of the output #4;
248	248
249	249	bits 4-15 — not used.
250		-)))|(% style="width:124px" %)U16
251		-|(% style="width:137px" %)**0x200C**|(% style="width:139px" %)1|(% style="width:805px" %)(((
	261	+)))|(% style="width:96px" %)U16
	262	+|(% style="width:92px" %)**0x200C**|(% style="width:94px" %)1|(% style="width:368px" %)(((
252	252	Relay states (bitfield):
253	253
254	254	bit 0 — state of the relay #1;
...	...	@@ -260,8 +260,8 @@
260	260	bit 3 — state of the relay #4;
261	261
262	262	bits 4-15 — not used.
263		-)))|(% style="width:124px" %)U16
264		-|(% style="width:137px" %)**0x200E**|(% style="width:139px" %)2|(% style="width:805px" %)(((
	274	+)))|(% style="width:96px" %)U16
	275	+|(% style="width:92px" %)**0x200E-0x200F**|(% style="width:94px" %)2|(% style="width:368px" %)(((
265	265	Errors 2 (bitfield):
266	266
267	267	bit 0 – "Low CH temperature", temperature is too low for charging;
...	...	@@ -292,10 +292,18 @@
292	292
293	293	bit 13 – “General error”;
294	294
295		-bits 14-31 — reserved.
296		-)))|(% style="width:124px" %)U32
297		-|(% style="width:137px" %)**0x2010**|(% style="width:139px" %)1|(% style="width:805px" %)Address or the BMS Logic device whose parameters are in registers 0x2011-0x20C9|(% style="width:124px" %)U16
298		-|(% style="width:137px" %)**0x2011**|(% style="width:139px" %)1|(% style="width:805px" %)(((
	306	+bit 14 — reserved (set to 0);
	307	+
	308	+bit 15 — reserved (set to 0);
	309	+
	310	+bit 16 — reserved (set to 0);
	311	+
	312	+bit 17 — “Precharge error”;
	313	+
	314	+bits 18-31 — not used.
	315	+)))|(% style="width:96px" %)U32
	316	+|(% style="width:92px" %)**0x2010**|(% style="width:94px" %)1|(% style="width:368px" %)Address or the BMS Logic device whose parameters are in registers 0x2011-0x20C9|(% style="width:96px" %)U16
	317	+|(% style="width:92px" %)**0x2011**|(% style="width:94px" %)1|(% style="width:368px" %)(((
299	299	State of the BMS Logic (bitfield):
300	300
301	301	bit 0 — device is present;
...	...	@@ -304,7 +304,7 @@
304	304
305	305	bit 2 — device is ready;
306	306
307		-bit 3 — data from the device is actual;
	326	+bit 3 — reserved;
308	308
309	309	bit 4 — temperature sensor #1 is present;
310	310
...	...	@@ -315,14 +315,14 @@
315	315	bit 7 — temperature sensor #2 is shorted;
316	316
317	317	bits 8-15 — reserved.
318		-)))|(% style="width:124px" %)U16
319		-|(% style="width:137px" %)**0x2012-0x2013**|(% style="width:139px" %)2|(% style="width:805px" %)Temperature of the BMS Logic, °C|(% style="width:124px" %)REAL32
320		-|(% style="width:137px" %)**0x2014-0x2015**|(% style="width:139px" %)2|(% style="width:805px" %)(((
	337	+)))|(% style="width:96px" %)U16
	338	+|(% style="width:92px" %)**0x2012-0x2013**|(% style="width:94px" %)2|(% style="width:368px" %)Temperature of the BMS Logic, °C|(% style="width:96px" %)REAL32
	339	+|(% style="width:92px" %)**0x2014-0x2015**|(% style="width:94px" %)2|(% style="width:368px" %)(((
321	321	Cell balancing flags (bitfield):
322	322
323	323	bit i — balancing resistor is connected to the i^^th^^ cell.
324		-)))|(% style="width:124px" %)U32
325		-|(% style="width:137px" %)**0x2016-0x2029**|(% style="width:139px" %)20|(% style="width:805px" %)(((
	343	+)))|(% style="width:96px" %)U32
	344	+|(% style="width:92px" %)**0x2016-0x2029**|(% style="width:94px" %)20|(% style="width:368px" %)(((
326	326	Array of cells states. Each element of the array corresponds to a cell and is a bitfield:
327	327
328	328	bit 0 — cell is present;
...	...	@@ -338,93 +338,99 @@
338	338	bit 5 — wires are connected to the cell;
339	339
340	340	bits 6-15 — reserved.
341		-)))|(% style="width:124px" %)U16[20]
342		-|(% style="width:137px" %)**0x202A-0x2051**|(% style="width:139px" %)40|(% style="width:805px" %)Array of cells voltages (V)|(% style="width:124px" %)REAL32[20]
343		-|(% style="width:137px" %)**0x2052-0x2079**|(% style="width:139px" %)40|(% style="width:805px" %)Array of cells temperatures (°C)|(% style="width:124px" %)REAL32[20]
344		-|(% style="width:137px" %)**0x207A-0x20A1**|(% style="width:139px" %)40|(% style="width:805px" %)Array of cells SOCs ~(%)|(% style="width:124px" %)REAL32[20]
345		-|(% style="width:137px" %)**0x20A2-0x20C9**|(% style="width:139px" %)40|(% style="width:805px" %)Array of cells resistances (Ohm)|(% style="width:124px" %)REAL32[20]
346		-|(% style="width:137px" %)**0x20F4**|(% style="width:139px" %)1|(% style="width:805px" %)(((
	360	+)))|(% style="width:96px" %)U16[20]
	361	+|(% style="width:92px" %)**0x202A-0x2051**|(% style="width:94px" %)40|(% style="width:368px" %)Array of cells voltages (V)|(% style="width:96px" %)REAL32[20]
	362	+|(% style="width:92px" %)**0x2052-0x2079**|(% style="width:94px" %)40|(% style="width:368px" %)Array of cells temperatures (°C)|(% style="width:96px" %)REAL32[20]
	363	+|(% style="width:92px" %)**0x207A-0x20A1**|(% style="width:94px" %)40|(% style="width:368px" %)Array of cells SOCs ~(%)|(% style="width:96px" %)REAL32[20]
	364	+|(% style="width:92px" %)**0x20A2-0x20C9**|(% style="width:94px" %)40|(% style="width:368px" %)Array of cells resistances (Ohm)|(% style="width:96px" %)REAL32[20]
	365	+|(% style="width:92px" %)**0x20F4**|(% style="width:94px" %)1|(% style="width:368px" %)(((
347	347	Discrete input signals 2 (bitfield):
348	348
349		-bit 0 – “Fuse 2”;
	368	+bit 0 — “Fuse 2”;
350	350
351		-bit 1 – “Fuse 3”;
	370	+bit 1 — “Fuse 3”;
352	352
353		-bit 2 – “Circuit breaker status”;
	372	+bit 2 — “Circuit breaker status”;
354	354
355		-bits 3-15 – reserved.
356		-)))|(% style="width:124px" %)U16
357		-|(% style="width:137px" %)**0x2100-0x2101**|(% style="width:139px" %)2|(% style="width:805px" %)Battery state of charge (SOC), %|(% style="width:124px" %)REAL32
358		-|(% style="width:137px" %)**0x2102**|(% style="width:139px" %)1|(% style="width:805px" %)Number of BMS Logic devices|(% style="width:124px" %)U16
359		-|(% style="width:137px" %)**0x2103**|(% style="width:139px" %)1|(% style="width:805px" %)Number of cells|(% style="width:124px" %)U16
360		-|(% style="width:137px" %)**0x2104-0x2105**|(% style="width:139px" %)2|(% style="width:805px" %)Battery voltage, V|(% style="width:124px" %)REAL32
361		-|(% style="width:137px" %)**0x2106-0x2107**|(% style="width:139px" %)2|(% style="width:805px" %)Battery resistance, Ohm|(% style="width:124px" %)REAL32
362		-|(% style="width:137px" %)**0x2108-0x2109**|(% style="width:139px" %)2|(% style="width:805px" %)Effective capacity, A×h|(% style="width:124px" %)REAL32
363		-|(% style="width:137px" %)**0x210A-0x210B**|(% style="width:139px" %)2|(% style="width:805px" %)Balancing effectivity, %|(% style="width:124px" %)REAL32
364		-|(% style="width:137px" %)**0x210C-0x210D**|(% style="width:139px" %)2|(% style="width:805px" %)State of health, %|(% style="width:124px" %)REAL32
365		-|(% style="width:137px" %)**0x210E-0x210F**|(% style="width:139px" %)2|(% style="width:805px" %)Depth of discharge, A×h|(% style="width:124px" %)REAL32
366		-|(% style="width:137px" %)**0x2110-0x2111**|(% style="width:139px" %)2|(% style="width:805px" %)Minimum BMS Logic temperature|(% style="width:124px" %)REAL32
367		-|(% style="width:137px" %)**0x2112**|(% style="width:139px" %)1|(% style="width:805px" %)Address of the BMS Logic device whose temperature is minimal|(% style="width:124px" %)U16
368		-|(% style="width:137px" %)**0x2113-0x2114**|(% style="width:139px" %)2|(% style="width:805px" %)Maximum BMS Logic temperature|(% style="width:124px" %)REAL32
369		-|(% style="width:137px" %)**0x2115**|(% style="width:139px" %)1|(% style="width:805px" %)Address of the BMS Logic device whose temperature is maximal|(% style="width:124px" %)U16
370		-|(% style="width:137px" %)**0x2116-0x2117**|(% style="width:139px" %)2|(% style="width:805px" %)BMS Logic polling rate, commands pre second|(% style="width:124px" %)REAL32
371		-|(% style="width:137px" %)**0x2118-0x2119**|(% style="width:139px" %)2|(% style="width:805px" %)Minimum cell temperature|(% style="width:124px" %)REAL32
372		-|(% style="width:137px" %)**0x211A**|(% style="width:139px" %)1|(% style="width:805px" %)Address of the BMS Logic device which is connected to the cell whose temperature is minimal|(% style="width:124px" %)U16
373		-|(% style="width:137px" %)**0x211B**|(% style="width:139px" %)1|(% style="width:805px" %)Position of the cell whose temperature is minimal|(% style="width:124px" %)U16
374		-|(% style="width:137px" %)**0x211C-0x211D**|(% style="width:139px" %)2|(% style="width:805px" %)Maximum cell temperature|(% style="width:124px" %)REAL32
375		-|(% style="width:137px" %)**0x211E**|(% style="width:139px" %)1|(% style="width:805px" %)Address of the BMS Logic device which is connected to the cell whose temperature is maximal|(% style="width:124px" %)U16
376		-|(% style="width:137px" %)**0x211F**|(% style="width:139px" %)1|(% style="width:805px" %)Position of the cell whose temperature is maximal|(% style="width:124px" %)U16
377		-|(% style="width:137px" %)**0x2120-0x2121**|(% style="width:139px" %)2|(% style="width:805px" %)Minimum cell voltage|(% style="width:124px" %)REAL32
378		-|(% style="width:137px" %)**0x2122**|(% style="width:139px" %)1|(% style="width:805px" %)Address of the BMS Logic device which is connected to the cell whose voltage is minimal|(% style="width:124px" %)U16
379		-|(% style="width:137px" %)**0x2123**|(% style="width:139px" %)1|(% style="width:805px" %)Position of the cell whose voltage is minimal|(% style="width:124px" %)U16
380		-|(% style="width:137px" %)**0x2124-0x2125**|(% style="width:139px" %)2|(% style="width:805px" %)Maximum cell voltage|(% style="width:124px" %)REAL32
381		-|(% style="width:137px" %)**0x2126**|(% style="width:139px" %)1|(% style="width:805px" %)Address of the BMS Logic device which is connected to the cell whose voltage is maximal|(% style="width:124px" %)U16
382		-|(% style="width:137px" %)**0x2127**|(% style="width:139px" %)1|(% style="width:805px" %)Position of the cell whose voltage is maximal|(% style="width:124px" %)U16
383		-|(% style="width:137px" %)**0x2128**|(% style="width:139px" %)1|(% style="width:805px" %)(((
	374	+bit 3 — signal "Balancing request";
	375	+
	376	+bit 4 — signal "Close Main contactor";
	377	+
	378	+bit 5 — signal "Close External 1";
	379	+
	380	+bits 6-15 — not used.
	381	+)))|(% style="width:96px" %)U16
	382	+|(% style="width:92px" %)**0x2100-0x2101**|(% style="width:94px" %)2|(% style="width:368px" %)Battery state of charge (SOC), %|(% style="width:96px" %)REAL32
	383	+|(% style="width:92px" %)**0x2102**|(% style="width:94px" %)1|(% style="width:368px" %)Number of BMS Logic devices|(% style="width:96px" %)U16
	384	+|(% style="width:92px" %)**0x2103**|(% style="width:94px" %)1|(% style="width:368px" %)Number of cells|(% style="width:96px" %)U16
	385	+|(% style="width:92px" %)**0x2104-0x2105**|(% style="width:94px" %)2|(% style="width:368px" %)Battery voltage, V|(% style="width:96px" %)REAL32
	386	+|(% style="width:92px" %)**0x2106-0x2107**|(% style="width:94px" %)2|(% style="width:368px" %)Battery resistance, Ohm|(% style="width:96px" %)REAL32
	387	+|(% style="width:92px" %)**0x2108-0x2109**|(% style="width:94px" %)2|(% style="width:368px" %)Effective capacity, A×h|(% style="width:96px" %)REAL32
	388	+|(% style="width:92px" %)**0x210A-0x210B**|(% style="width:94px" %)2|(% style="width:368px" %)Balancing effectivity, %|(% style="width:96px" %)REAL32
	389	+|(% style="width:92px" %)**0x210C-0x210D**|(% style="width:94px" %)2|(% style="width:368px" %)State of health, %|(% style="width:96px" %)REAL32
	390	+|(% style="width:92px" %)**0x210E-0x210F**|(% style="width:94px" %)2|(% style="width:368px" %)Depth of discharge, A×h|(% style="width:96px" %)REAL32
	391	+|(% style="width:92px" %)**0x2110-0x2111**|(% style="width:94px" %)2|(% style="width:368px" %)Minimum BMS Logic temperature|(% style="width:96px" %)REAL32
	392	+|(% style="width:92px" %)**0x2112**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device whose temperature is minimal|(% style="width:96px" %)U16
	393	+|(% style="width:92px" %)**0x2113-0x2114**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum BMS Logic temperature|(% style="width:96px" %)REAL32
	394	+|(% style="width:92px" %)**0x2115**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device whose temperature is maximal|(% style="width:96px" %)U16
	395	+|(% style="width:92px" %)**0x2116-0x2117**|(% style="width:94px" %)2|(% style="width:368px" %)BMS Logic polling rate, commands pre second|(% style="width:96px" %)REAL32
	396	+|(% style="width:92px" %)**0x2118-0x2119**|(% style="width:94px" %)2|(% style="width:368px" %)Minimum cell temperature|(% style="width:96px" %)REAL32
	397	+|(% style="width:92px" %)**0x211A**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device which is connected to the cell whose temperature is minimal|(% style="width:96px" %)U16
	398	+|(% style="width:92px" %)**0x211B**|(% style="width:94px" %)1|(% style="width:368px" %)Position of the cell whose temperature is minimal|(% style="width:96px" %)U16
	399	+|(% style="width:92px" %)**0x211C-0x211D**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum cell temperature|(% style="width:96px" %)REAL32
	400	+|(% style="width:92px" %)**0x211E**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device which is connected to the cell whose temperature is maximal|(% style="width:96px" %)U16
	401	+|(% style="width:92px" %)**0x211F**|(% style="width:94px" %)1|(% style="width:368px" %)Position of the cell whose temperature is maximal|(% style="width:96px" %)U16
	402	+|(% style="width:92px" %)**0x2120-0x2121**|(% style="width:94px" %)2|(% style="width:368px" %)Minimum cell voltage|(% style="width:96px" %)REAL32
	403	+|(% style="width:92px" %)**0x2122**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device which is connected to the cell whose voltage is minimal|(% style="width:96px" %)U16
	404	+|(% style="width:92px" %)**0x2123**|(% style="width:94px" %)1|(% style="width:368px" %)Position of the cell whose voltage is minimal|(% style="width:96px" %)U16
	405	+|(% style="width:92px" %)**0x2124-0x2125**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum cell voltage|(% style="width:96px" %)REAL32
	406	+|(% style="width:92px" %)**0x2126**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device which is connected to the cell whose voltage is maximal|(% style="width:96px" %)U16
	407	+|(% style="width:92px" %)**0x2127**|(% style="width:94px" %)1|(% style="width:368px" %)Position of the cell whose voltage is maximal|(% style="width:96px" %)U16
	408	+|(% style="width:92px" %)**0x2128**|(% style="width:94px" %)1|(% style="width:368px" %)(((
384	384	Error flag:
385	385
386	386	0 — no errors;
387	387
388	388	1 — there are some errors.
389		-)))|(% style="width:124px" %)U16
390		-|(% style="width:137px" %)**0x2130-0x2131**|(% style="width:139px" %)2|(% style="width:805px" %)Energy received from the charger, W×h|(% style="width:124px" %)REAL32
391		-|(% style="width:137px" %)**0x2132-0x2133**|(% style="width:139px" %)2|(% style="width:805px" %)Energy consumed by the load, W×h|(% style="width:124px" %)REAL32
392		-|(% style="width:137px" %)**0x2134-0x2135**|(% style="width:139px" %)2|(% style="width:805px" %)Energy dissipated by the balancing resistors, W×h|(% style="width:124px" %)REAL32
393		-|(% style="width:137px" %)**0x2140**|(% style="width:139px" %)1|(% style="width:805px" %)(((
	414	+)))|(% style="width:96px" %)U16
	415	+|(% style="width:92px" %)**0x2130-0x2131**|(% style="width:94px" %)2|(% style="width:368px" %)Energy received from the charger, W×h|(% style="width:96px" %)REAL32
	416	+|(% style="width:92px" %)**0x2132-0x2133**|(% style="width:94px" %)2|(% style="width:368px" %)Energy consumed by the load, W×h|(% style="width:96px" %)REAL32
	417	+|(% style="width:92px" %)**0x2134-0x2135**|(% style="width:94px" %)2|(% style="width:368px" %)Energy dissipated by the balancing resistors, W×h|(% style="width:96px" %)REAL32
	418	+|(% style="width:92px" %)**0x2140**|(% style="width:94px" %)1|(% style="width:368px" %)(((
394	394	SD-card mounting flag:
395	395
396	396	0 — not mounted;
397	397
398	398	1 — mounted.
399		-)))|(% style="width:124px" %)U16
400		-|(% style="width:137px" %)**0x2141**|(% style="width:139px" %)1|(% style="width:805px" %)Reserved|(% style="width:124px" %)U16
401		-|(% style="width:137px" %)**0x2142**|(% style="width:139px" %)1|(% style="width:805px" %)Reserved|(% style="width:124px" %)U16
402		-|(% style="width:137px" %)**0x2170**|(% style="width:139px" %)1|(% style="width:805px" %)(((
	424	+)))|(% style="width:96px" %)U16
	425	+|(% style="width:92px" %)**0x2141**|(% style="width:94px" %)1|(% style="width:368px" %)Reserved|(% style="width:96px" %)U16
	426	+|(% style="width:92px" %)**0x2142**|(% style="width:94px" %)1|(% style="width:368px" %)Reserved|(% style="width:96px" %)U16
	427	+|(% style="width:92px" %)**0x2170**|(% style="width:94px" %)1|(% style="width:368px" %)(((
403	403	Wi-Fi connection status:
404	404
405	405	0 — no connection;
406	406
407	407	1 — connection is established.
408		-)))|(% style="width:124px" %)U16
409		-|(% style="width:137px" %)**0x2171-0x2172**|(% style="width:139px" %)2|(% style="width:805px" %)IP-address in the Wi-Fi network|(% style="width:124px" %)U8[4]
410		-|(% style="width:137px" %)**0x2173-0x2175**|(% style="width:139px" %)3|(% style="width:805px" %)MAC-address of the Wi-Fi module|(% style="width:124px" %)U8[6]
411		-|(% style="width:137px" %)**0x2179-0x217A**|(% style="width:139px" %)2|(% style="width:805px" %)Instant effective capacity, A×h|(% style="width:124px" %)REAL32
412		-|(% style="width:137px" %)**0x217B-0x217C**|(% style="width:139px" %)2|(% style="width:805px" %)Coulomb received from the charger, A×h|(% style="width:124px" %)REAL32
413		-|(% style="width:137px" %)**0x217D-0x217E**|(% style="width:139px" %)2|(% style="width:805px" %)Coulomb consumed by the load, A×h|(% style="width:124px" %)REAL32
414		-|(% style="width:137px" %)**0x217F-0x2180**|(% style="width:139px" %)2|(% style="width:805px" %)Ethernet IP-address|(% style="width:124px" %)U8[4]
415		-|(% style="width:137px" %)**0x2181-0x2182**|(% style="width:139px" %)2|(% style="width:805px" %)Ethernet netmask|(% style="width:124px" %)U8[4]
416		-|(% style="width:137px" %)**0x2183-0x2184**|(% style="width:139px" %)2|(% style="width:805px" %)Ethernet gateway|(% style="width:124px" %)U8[4]
417		-|(% style="width:137px" %)**0x2185-0x2186**|(% style="width:139px" %)2|(% style="width:805px" %)Calibrated voltage in the reference line of the current sensor, V|(% style="width:124px" %)REAL32
418		-|(% style="width:137px" %)**0x218E**|(% style="width:139px" %)2|(% style="width:805px" %)Voltage from the current sensor, V|(% style="width:124px" %)REAL32
419		-|(% style="width:137px" %)**0x2190**|(% style="width:139px" %)2|(% style="width:805px" %)Voltage in the reference line of the current sensor, V|(% style="width:124px" %)REAL32
420		-|(% style="width:137px" %)**0x2192**|(% style="width:139px" %)2|(% style="width:805px" %)Voltage from the auxiliary current sensor, V|(% style="width:124px" %)REAL32
421		-|(% style="width:137px" %)**0x2194**|(% style="width:139px" %)2|(% style="width:805px" %)Voltage in the reference line of the auxiliary current sensor, V|(% style="width:124px" %)REAL32
422		-|(% style="width:137px" %)**0x219F**|(% style="width:139px" %)2|(% style="width:805px" %)Charge current limit, A|(% style="width:124px" %)REAL32
423		-|(% style="width:137px" %)**0x21A1**|(% style="width:139px" %)2|(% style="width:805px" %)Discharge current limit, A|(% style="width:124px" %)REAL32
424		-|(% style="width:137px" %)**0x21B8**|(% style="width:139px" %)1|(% style="width:805px" %)Flag indicating that the cells are balancing|(% style="width:124px" %)U16
425		-|(% style="width:137px" %)**0x21C6**|(% style="width:139px" %)2|(% style="width:805px" %)Calibrated voltage in the reference line of the auxiliary current sensor, V|(% style="width:124px" %)REAL32
426		-|(% style="width:137px" %)**0x21CA**|(% style="width:139px" %)2|(% style="width:805px" %)Average cell voltage, V|(% style="width:124px" %)REAL32
427		-|(% style="width:137px" %)**0x2200-0x2203**|(% style="width:139px" %)4|(% style="width:805px" %)(((
	433	+)))|(% style="width:96px" %)U16
	434	+|(% style="width:92px" %)**0x2171-0x2172**|(% style="width:94px" %)2|(% style="width:368px" %)IP-address in the Wi-Fi network|(% style="width:96px" %)U8[4]
	435	+|(% style="width:92px" %)**0x2173-0x2175**|(% style="width:94px" %)3|(% style="width:368px" %)MAC-address of the Wi-Fi module|(% style="width:96px" %)U8[6]
	436	+|(% style="width:92px" %)**0x2179-0x217A**|(% style="width:94px" %)2|(% style="width:368px" %)Instant effective capacity, A×h|(% style="width:96px" %)REAL32
	437	+|(% style="width:92px" %)**0x217B-0x217C**|(% style="width:94px" %)2|(% style="width:368px" %)Coulomb received from the charger, A×h|(% style="width:96px" %)REAL32
	438	+|(% style="width:92px" %)**0x217D-0x217E**|(% style="width:94px" %)2|(% style="width:368px" %)Coulomb consumed by the load, A×h|(% style="width:96px" %)REAL32
	439	+|(% style="width:92px" %)**0x217F-0x2180**|(% style="width:94px" %)2|(% style="width:368px" %)Ethernet IP-address|(% style="width:96px" %)U8[4]
	440	+|(% style="width:92px" %)**0x2181-0x2182**|(% style="width:94px" %)2|(% style="width:368px" %)Ethernet netmask|(% style="width:96px" %)U8[4]
	441	+|(% style="width:92px" %)**0x2183-0x2184**|(% style="width:94px" %)2|(% style="width:368px" %)Ethernet gateway|(% style="width:96px" %)U8[4]
	442	+|(% style="width:92px" %)**0x2185-0x2186**|(% style="width:94px" %)2|(% style="width:368px" %)Calibrated voltage in the reference line of the current sensor, V|(% style="width:96px" %)REAL32
	443	+|(% style="width:92px" %)**0x218E-0x218F**|(% style="width:94px" %)2|(% style="width:368px" %)Voltage from the current sensor, V|(% style="width:96px" %)REAL32
	444	+|(% style="width:92px" %)**0x2190-0x2191**|(% style="width:94px" %)2|(% style="width:368px" %)Voltage in the reference line of the current sensor, V|(% style="width:96px" %)REAL32
	445	+|(% style="width:92px" %)**0x2192-0x2193**|(% style="width:94px" %)2|(% style="width:368px" %)Voltage from the auxiliary current sensor, V|(% style="width:96px" %)REAL32
	446	+|(% style="width:92px" %)**0x2194-0x2195**|(% style="width:94px" %)2|(% style="width:368px" %)Voltage in the reference line of the auxiliary current sensor, V|(% style="width:96px" %)REAL32
	447	+|(% style="width:92px" %)**0x219F-0x21A0**|(% style="width:94px" %)2|(% style="width:368px" %)Charge current limit, A|(% style="width:96px" %)REAL32
	448	+|(% style="width:92px" %)**0x21A1-0x21A2**|(% style="width:94px" %)2|(% style="width:368px" %)Discharge current limit, A|(% style="width:96px" %)REAL32
	449	+|(% style="width:92px" %)**0x21B8**|(% style="width:94px" %)1|(% style="width:368px" %)Flag indicating that the cells are balancing|(% style="width:96px" %)U16
	450	+|(% style="width:92px" %)**0x21C6-0x21C7**|(% style="width:94px" %)2|(% style="width:368px" %)Calibrated voltage in the reference line of the auxiliary current sensor, V|(% style="width:96px" %)REAL32
	451	+|(% style="width:92px" %)**0x21CA-0x21CB**|(% style="width:94px" %)2|(% style="width:368px" %)Average cell voltage, V|(% style="width:96px" %)REAL32
	452	+|(% style="width:92px" %)**0x2200-0x2203**|(% style="width:94px" %)4|(% style="width:368px" %)(((
428	428	Record #1 from the errors journal. First 32-bit word contains a timestamp, second 32-bit word contains errors 1 flags (see 0x2007-0x2008).
429	429
430	430	Timestamp format:
...	...	@@ -440,22 +440,22 @@
440	440	bits 20-25 — minutes;
441	441
442	442	bits 26-31 — seconds.
443		-)))|(% style="width:124px" %)U32[2]
444		-|(% style="width:137px" %)**0x2204-0x2207**|(% style="width:139px" %)4|(% style="width:805px" %)Record #2 from the errors journal|(% style="width:124px" %)U32[2]
445		-|(% style="width:137px" %)**0x2208-0x227B**|(% style="width:139px" %) |(% style="width:805px" %)Records #3-31 from the errors journal|(% style="width:124px" %)
446		-|(% style="width:137px" %)**0x227C-0x227F**|(% style="width:139px" %)4|(% style="width:805px" %)Record #32 from the errors journal|(% style="width:124px" %)U32[2]
447		-|(% style="width:137px" %)**0x2300**|(% style="width:139px" %)1|(% style="width:805px" %)Number of the last record from the errors journal (1..32)|(% style="width:124px" %)U16
448		-|(% style="width:137px" %)**0x2380**|(% style="width:139px" %)4|(% style="width:805px" %)Record data #1 from the errors journal. First 32-bit word contains errors 2 flags (see 0x200E-0x200F).|(% style="width:124px" %)U32[2]
449		-|(% style="width:137px" %)**0x2384-0x2387**|(% style="width:139px" %)4|(% style="width:805px" %)Record data #2 from the errors journal|(% style="width:124px" %)U32[2]
450		-|(% style="width:137px" %)**0x2388-0x23FB**|(% style="width:139px" %) |(% style="width:805px" %)Records data #3-31 from the errors journal|(% style="width:124px" %)
451		-|(% style="width:137px" %)**0x23FC-0x23FF**|(% style="width:139px" %)4|(% style="width:805px" %)Record data #32 from the errors journal|(% style="width:124px" %)U32[2]
452		-|(% style="width:137px" %)**0x2400**|(% style="width:139px" %)2|(% style="width:805px" %)Current measured by the auxiliary current sensor, A|(% style="width:124px" %)REAL32
453		-|(% style="width:137px" %)**0x2402**|(% style="width:139px" %)2|(% style="width:805px" %)(((
	468	+)))|(% style="width:96px" %)U32[2]
	469	+|(% style="width:92px" %)**0x2204-0x2207**|(% style="width:94px" %)4|(% style="width:368px" %)Record #2 from the errors journal|(% style="width:96px" %)U32[2]
	470	+|(% style="width:92px" %)**0x2208-0x227B**|(% style="width:94px" %) |(% style="width:368px" %)Records #3-31 from the errors journal|(% style="width:96px" %)
	471	+|(% style="width:92px" %)**0x227C-0x227F**|(% style="width:94px" %)4|(% style="width:368px" %)Record #32 from the errors journal|(% style="width:96px" %)U32[2]
	472	+|(% style="width:92px" %)**0x2300**|(% style="width:94px" %)1|(% style="width:368px" %)Number of the last record from the errors journal (1..32)|(% style="width:96px" %)U16
	473	+|(% style="width:92px" %)**0x2380-0x2383**|(% style="width:94px" %)4|(% style="width:368px" %)Record data #1 from the errors journal. First 32-bit word contains errors 2 flags (see 0x200E-0x200F).|(% style="width:96px" %)U32[2]
	474	+|(% style="width:92px" %)**0x2384-0x2387**|(% style="width:94px" %)4|(% style="width:368px" %)Record data #2 from the errors journal|(% style="width:96px" %)U32[2]
	475	+|(% style="width:92px" %)**0x2388-0x23FB**|(% style="width:94px" %) |(% style="width:368px" %)Records data #3-31 from the errors journal|(% style="width:96px" %)
	476	+|(% style="width:92px" %)**0x23FC-0x23FF**|(% style="width:94px" %)4|(% style="width:368px" %)Record data #32 from the errors journal|(% style="width:96px" %)U32[2]
	477	+|(% style="width:92px" %)**0x2400-0x2401**|(% style="width:94px" %)2|(% style="width:368px" %)Current measured by the auxiliary current sensor, A|(% style="width:96px" %)REAL32
	478	+|(% style="width:92px" %)**0x2402-0x2403**|(% style="width:94px" %)2|(% style="width:368px" %)(((
454	454	Final battery current, A
455	455
456	456	Note — Typically it is the sum of the values measured by the main and auxiliary current sensors
457		-)))|(% style="width:124px" %)REAL32
458		-|(% style="width:137px" %)**0x2410**|(% style="width:139px" %)1|(% style="width:805px" %)(((
	482	+)))|(% style="width:96px" %)REAL32
	483	+|(% style="width:92px" %)**0x2410**|(% style="width:94px" %)1|(% style="width:368px" %)(((
459	459	Battery state:
460	460
461	461	0 – Unknown;
...	...	@@ -471,19 +471,20 @@
471	471	5 – Discharging OFF;
472	472
473	473	6 – Relaxed (after discharging).
474		-)))|(% style="width:124px" %)U16
475		-|(% style="width:137px" %)**0x2411**|(% style="width:139px" %)2|(% style="width:805px" %)Duration of the battery state (0x2410), seconds|(% style="width:124px" %)U32
476		-|(% style="width:137px" %)**0x2420**|(% style="width:139px" %)2|(% style="width:805px" %)Nominal battery capacity, A×h|(% style="width:124px" %)REAL32
477		-|(% style="width:137px" %)**0x2422**|(% style="width:139px" %)2|(% style="width:805px" %)Maximum charge voltage, V|(% style="width:124px" %)REAL32
478		-|(% style="width:137px" %)**0x2424**|(% style="width:139px" %)2|(% style="width:805px" %)Minimum discharge voltage, V|(% style="width:124px" %)REAL32
479		-|(% style="width:137px" %)**0x2426**|(% style="width:139px" %)2|(% style="width:805px" %)Maximum charge current, A|(% style="width:124px" %)REAL32
480		-|(% style="width:137px" %)**0x2428**|(% style="width:139px" %)2|(% style="width:805px" %)Maximum discharge current, A|(% style="width:124px" %)REAL32
	499	+)))|(% style="width:96px" %)U16
	500	+|(% style="width:92px" %)**0x2411-0x2412**|(% style="width:94px" %)2|(% style="width:368px" %)Duration of the battery state (0x2410), seconds|(% style="width:96px" %)U32
	501	+|(% style="width:92px" %)**0x2420-0x2421**|(% style="width:94px" %)2|(% style="width:368px" %)Nominal battery capacity, A×h|(% style="width:96px" %)REAL32
	502	+|(% style="width:92px" %)**0x2422-0x2423**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum charge voltage, V|(% style="width:96px" %)REAL32
	503	+|(% style="width:92px" %)**0x2424-0x2425**|(% style="width:94px" %)2|(% style="width:368px" %)Minimum discharge voltage, V|(% style="width:96px" %)REAL32
	504	+|(% style="width:92px" %)**0x2426-0x2427**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum charge current, A|(% style="width:96px" %)REAL32
	505	+|(% style="width:92px" %)**0x2428-0x2429**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum discharge current, A|(% style="width:96px" %)REAL32
481	481
482		-== 4.2.3 Holding registers ==
	507	+=== Holding registers ===
483	483
484		-|(% style="width:158px" %)**Register address**|(% style="width:155px" %)**Number of registers**|(% style="width:999px" %)**Content**|(% style="width:146px" %)**Type**
485		-|(% style="width:158px" %)**0x4000**|(% style="width:155px" %)1|(% style="width:999px" %)Address of the BMS Logic device whose parameters should be in the input registers 0x2011-0x20C9|(% style="width:146px" %)U16
486		-|(% style="width:158px" %)**0x4100**|(% style="width:155px" %)2|(% style="width:999px" %)(((
	509	+(% style="width:653px" %)
	510	+|(% style="width:92px" %)**Register address**|(% style="width:94px" %)**Number of registers**|(% style="width:368px" %)**Content**|(% style="width:96px" %)**Type**
	511	+|(% style="width:92px" %)**0x4000**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device whose parameters should be in the input registers 0x2011-0x20C9|(% style="width:96px" %)U16
	512	+|(% style="width:92px" %)**0x4100-0x4101**|(% style="width:94px" %)2|(% style="width:368px" %)(((
487	487	Command to acknowledge errors in the errors journal (bitfield). Each //i//^^th^^ bit corresponds to (//i//+1) record.
488	488
489	489	Notes:
...	...	@@ -491,8 +491,8 @@
491	491	1 – After the errors are acknowledged, the register value will be set to 0.
492	492
493	493	2 – To acknowledge all errors, set 0xFFFFFFFF.
494		-)))|(% style="width:146px" %)U32
495		-|(% style="width:158px" %)**0x5100**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	520	+)))|(% style="width:96px" %)U32
	521	+|(% style="width:92px" %)**0x5100**|(% style="width:94px" %)1|(% style="width:368px" %)(((
496	496	Software control of the "Battery cover" signal. Allowable values:
497	497
498	498	0 – clear the signal;
...	...	@@ -500,8 +500,8 @@
500	500	1 – set the signal;
501	501
502	502	2-65535 – use the physical input "Battery cover".
503		-)))|(% style="width:146px" %)U16
504		-|(% style="width:158px" %)**0x5101**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	529	+)))|(% style="width:96px" %)U16
	530	+|(% style="width:92px" %)**0x5101**|(% style="width:94px" %)1|(% style="width:368px" %)(((
505	505	Software control of the "Charger connected" signal. Allowable values:
506	506
507	507	0 – clear the signal;
...	...	@@ -509,8 +509,8 @@
509	509	1 – set the signal;
510	510
511	511	2-65535 – use the physical input "Charger connected".
512		-)))|(% style="width:146px" %)U16
513		-|(% style="width:158px" %)**0x5102**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	538	+)))|(% style="width:96px" %)U16
	539	+|(% style="width:92px" %)**0x5102**|(% style="width:94px" %)1|(% style="width:368px" %)(((
514	514	Software control of the "Power down request" signal. Allowable values:
515	515
516	516	0 – clear the signal;
...	...	@@ -518,8 +518,8 @@
518	518	1 – set the signal;
519	519
520	520	2-65535 – use the physical input "Power down request".
521		-)))|(% style="width:146px" %)U16
522		-|(% style="width:158px" %)**0x5103**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	547	+)))|(% style="width:96px" %)U16
	548	+|(% style="width:92px" %)**0x5103**|(% style="width:94px" %)1|(% style="width:368px" %)(((
523	523	Software control of the "Inhibit charging" signal. Allowable values:
524	524
525	525	0 – clear the signal;
...	...	@@ -527,8 +527,8 @@
527	527	1 – set the signal;
528	528
529	529	2-65535 – use the physical input "Inhibit charging".
530		-)))|(% style="width:146px" %)U16
531		-|(% style="width:158px" %)**0x5104**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	556	+)))|(% style="width:96px" %)U16
	557	+|(% style="width:92px" %)**0x5104**|(% style="width:94px" %)1|(% style="width:368px" %)(((
532	532	Software control of the "Inhibit discharging" signal. Allowable values:
533	533
534	534	0 – clear the signal;
...	...	@@ -536,8 +536,8 @@
536	536	1 – set the signal;
537	537
538	538	2-65535 – use the physical input "Inhibit discharging".
539		-)))|(% style="width:146px" %)U16
540		-|(% style="width:158px" %)**0x5105**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	565	+)))|(% style="width:96px" %)U16
	566	+|(% style="width:92px" %)**0x5105**|(% style="width:94px" %)1|(% style="width:368px" %)(((
541	541	Software control of the "Charging contactor feedback" signal. Allowable values:
542	542
543	543	0 – clear the signal;
...	...	@@ -545,8 +545,8 @@
545	545	1 – set the signal;
546	546
547	547	2-65535 – use the physical input "Charging contactor feedback".
548		-)))|(% style="width:146px" %)U16
549		-|(% style="width:158px" %)**0x5106**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	574	+)))|(% style="width:96px" %)U16
	575	+|(% style="width:92px" %)**0x5106**|(% style="width:94px" %)1|(% style="width:368px" %)(((
550	550	Software control of the "Discharging contactor feedback" signal. Allowable values:
551	551
552	552	0 – clear the signal;
...	...	@@ -554,8 +554,8 @@
554	554	1 – set the signal;
555	555
556	556	2-65535 – use the physical input "Discharging contactor feedback".
557		-)))|(% style="width:146px" %)U16
558		-|(% style="width:158px" %)**0x5107**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	583	+)))|(% style="width:96px" %)U16
	584	+|(% style="width:92px" %)**0x5107**|(% style="width:94px" %)1|(% style="width:368px" %)(((
559	559	Software control of the "Insulation status" signal. Allowable values:
560	560
561	561	0 – clear the signal;
...	...	@@ -563,8 +563,8 @@
563	563	1 – set the signal;
564	564
565	565	2-65535 – use the physical input "Insulation status".
566		-)))|(% style="width:146px" %)U16
567		-|(% style="width:158px" %)**0x5108**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	592	+)))|(% style="width:96px" %)U16
	593	+|(% style="width:92px" %)**0x5108**|(% style="width:94px" %)1|(% style="width:368px" %)(((
568	568	Software control of the "Charge request" signal. Allowable values:
569	569
570	570	0 – clear the signal;
...	...	@@ -572,8 +572,8 @@
572	572	1 – set the signal;
573	573
574	574	2-65535 – use the physical input "Charge request".
575		-)))|(% style="width:146px" %)U16
576		-|(% style="width:158px" %)**0x5109**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	601	+)))|(% style="width:96px" %)U16
	602	+|(% style="width:92px" %)**0x5109**|(% style="width:94px" %)1|(% style="width:368px" %)(((
577	577	Software control of the "Precharge request" signal. Allowable values:
578	578
579	579	0 – clear the signal;
...	...	@@ -581,8 +581,8 @@
581	581	1 – set the signal;
582	582
583	583	2-65535 – use the physical input "Precharge request".
584		-)))|(% style="width:146px" %)U16
585		-|(% style="width:158px" %)**0x510A**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	610	+)))|(% style="width:96px" %)U16
	611	+|(% style="width:92px" %)**0x510A**|(% style="width:94px" %)1|(% style="width:368px" %)(((
586	586	Software control of the "Discharge request" signal. Allowable values:
587	587
588	588	0 – clear the signal;
...	...	@@ -590,8 +590,8 @@
590	590	1 – set the signal;
591	591
592	592	2-65535 – use the physical input "Discharge request".
593		-)))|(% style="width:146px" %)U16
594		-|(% style="width:158px" %)**0x510B**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	619	+)))|(% style="width:96px" %)U16
	620	+|(% style="width:92px" %)**0x510B**|(% style="width:94px" %)1|(% style="width:368px" %)(((
595	595	Software control of the "PCH contactor feedback" signal. Allowable values:
596	596
597	597	0 – clear the signal;
...	...	@@ -599,8 +599,8 @@
599	599	1 – set the signal;
600	600
601	601	2-65535 – use the physical input "PCH contactor feedback".
602		-)))|(% style="width:146px" %)U16
603		-|(% style="width:158px" %)**0x510C**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	628	+)))|(% style="width:96px" %)U16
	629	+|(% style="width:92px" %)**0x510C**|(% style="width:94px" %)1|(% style="width:368px" %)(((
604	604	Software control of the "CH/DCH contactor feedback" signal. Allowable values:
605	605
606	606	0 – clear the signal;
...	...	@@ -608,8 +608,8 @@
608	608	1 – set the signal;
609	609
610	610	2-65535 – use the physical input "CH/DCH contactor feedback".
611		-)))|(% style="width:146px" %)U16
612		-|(% style="width:158px" %)**0x510D**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	637	+)))|(% style="width:96px" %)U16
	638	+|(% style="width:92px" %)**0x510D**|(% style="width:94px" %)1|(% style="width:368px" %)(((
613	613	Software control of the "Main contactor feedback" signal. Allowable values:
614	614
615	615	0 – clear the signal;
...	...	@@ -617,8 +617,8 @@
617	617	1 – set the signal;
618	618
619	619	2-65535 – use the physical input "Main contactor feedback".
620		-)))|(% style="width:146px" %)U16
621		-|(% style="width:158px" %)**0x510E**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	646	+)))|(% style="width:96px" %)U16
	647	+|(% style="width:92px" %)**0x510E**|(% style="width:94px" %)1|(% style="width:368px" %)(((
622	622	Software control of the "Interlock" signal. Allowable values:
623	623
624	624	0 – clear the signal;
...	...	@@ -626,8 +626,8 @@
626	626	1 – set the signal;
627	627
628	628	2-65535 – use the physical input "Interlock".
629		-)))|(% style="width:146px" %)U16
630		-|(% style="width:158px" %)**0x510F**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	655	+)))|(% style="width:96px" %)U16
	656	+|(% style="width:92px" %)**0x510F**|(% style="width:94px" %)1|(% style="width:368px" %)(((
631	631	Software control of the "Fuse 1" signal. Allowable values:
632	632
633	633	0 – clear the signal;
...	...	@@ -635,8 +635,8 @@
635	635	1 – set the signal;
636	636
637	637	2-65535 – use the physical input "Fuse 1".
638		-)))|(% style="width:146px" %)U16
639		-|(% style="width:158px" %)**0x5110**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	664	+)))|(% style="width:96px" %)U16
	665	+|(% style="width:92px" %)**0x5110**|(% style="width:94px" %)1|(% style="width:368px" %)(((
640	640	Software control of the "Fuse 2" signal. Allowable values:
641	641
642	642	0 – clear the signal;
...	...	@@ -644,8 +644,8 @@
644	644	1 – set the signal;
645	645
646	646	2-65535 – use the physical input "Fuse 2".
647		-)))|(% style="width:146px" %)U16
648		-|(% style="width:158px" %)**0x5111**|(% style="width:155px" %)1|(% style="width:999px" %)(((
	673	+)))|(% style="width:96px" %)U16
	674	+|(% style="width:92px" %)**0x5111**|(% style="width:94px" %)1|(% style="width:368px" %)(((
649	649	Software control of the "Fuse 3" signal. Allowable values:
650	650
651	651	0 – clear the signal;
...	...	@@ -653,4 +653,40 @@
653	653	1 – set the signal;
654	654
655	655	2-65535 – use the physical input "Fuse 3".
656		-)))|(% style="width:146px" %)U16
	682	+)))|(% style="width:96px" %)U16
	683	+|(% style="width:92px" %)**0x5112**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	684	+Software control of the "Circuit breaker status" signal. Allowable values:
	685	+
	686	+0 – clear the signal;
	687	+
	688	+1 – set the signal;
	689	+
	690	+2-65535 – use the physical input "Circuit breaker status".
	691	+)))|(% style="width:96px" %)U16
	692	+|(% style="width:92px" %)**0x5113**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	693	+Software control of the "Balancing request" signal. Allowable values:
	694	+
	695	+0 – clear the signal;
	696	+
	697	+1 – set the signal;
	698	+
	699	+2-65535 – use the physical input "Balancing request".
	700	+)))|(% style="width:96px" %)U16
	701	+|(% style="width:92px" %)**0x5114**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	702	+Software control of the "Close Main contactor" signal. Allowable values:
	703	+
	704	+0 – clear the signal;
	705	+
	706	+1 – set the signal;
	707	+
	708	+2-65535 – use the physical input "Close Main contactor".
	709	+)))|(% style="width:96px" %)U16
	710	+|(% style="width:92px" %)**0x5115**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	711	+Software control of the "Close External 1" signal. Allowable values:
	712	+
	713	+0 – clear the signal;
	714	+
	715	+1 – set the signal;
	716	+
	717	+2-65535 – use the physical input "Close External 1".
	718	+)))|(% style="width:96px" %)U16