Changes for page 5.2 Modbus protocol

Summary

• Page properties (3 modified, 0 added, 0 removed)

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-5.2 Modbus protocol
	1	+4.2 Modbus protocol

Parent

...	...	@@ -1,1 +1,1 @@
1		-Battery management systems.BMS Main 2\.1.5\. Communication protocols.WebHome
	1	+drafts.bms-main-2.WebHome

Content

...	...	@@ -1,11 +1,5 @@
1		-(% data-numbered-headings-start="5" style="--numbered-headings-start: 4;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
2		-= Communication protocols =
	1	+== 4.2.1 General information ==
3	3
4		-(% data-numbered-headings-start="2" style="--numbered-headings-start: 1;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
5		-== Modbus protocol ==
6		-
7		-=== General information ===
8		-
9	9	The BMS Main 2.x device provides the information about the battery system using Modbus protocol. The BMS is a Modbus-server and it responds to the Modbus-client’s commands.
10	10
11	11	Interaction with the device is performed over the RS-485 bus (Modbus RTU) or the Ethernet network (Modbus TCP).
...	...	@@ -34,18 +34,17 @@
34	34
35	35	Words are in the **little endian**.
36	36
37		-=== Input registers ===
	31	+== 4.2.2 Input registers ==
38	38
39		-(% style="width:651px" %)
40		-|(% style="width:92px" %)**Register address**|(% style="width:94px" %)**Number of registers**|(% style="width:368px" %)**Content**|(% style="width:96px" %)**Type**
41		-|(% style="width:92px" %)**0x0000**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	33	+|(% style="width:137px" %)**Register address**|(% style="width:139px" %)**Number of registers**|(% style="width:805px" %)**Content**|(% style="width:124px" %)**Type**
	34	+|(% style="width:137px" %)**0x0000**|(% style="width:139px" %)1|(% style="width:805px" %)(((
42	42	Hardware version:
43	43
44	44	byte 0 — minor;
45	45
46	46	byte 1 — major.
47		-)))|(% style="width:96px" %)U8[2]
48		-|(% style="width:92px" %)**0x0001-0x0002**|(% style="width:94px" %)2|(% style="width:368px" %)(((
	40	+)))|(% style="width:124px" %)U8[2]
	41	+|(% style="width:137px" %)**0x0001-0x0002**|(% style="width:139px" %)2|(% style="width:805px" %)(((
49	49	Firmware version:
50	50
51	51	byte 0 — patch;
...	...	@@ -55,8 +55,8 @@
55	55	byte 2 — major;
56	56
57	57	byte 3 — not used (set to 0).
58		-)))|(% style="width:96px" %)U8[4]
59		-|(% style="width:92px" %)**0x0003-0x0004**|(% style="width:94px" %)2|(% style="width:368px" %)(((
	51	+)))|(% style="width:124px" %)U8[4]
	52	+|(% style="width:137px" %)**0x0003-0x0004**|(% style="width:139px" %)2|(% style="width:805px" %)(((
60	60	Bootloader version:
61	61
62	62	byte 0 — patch;
...	...	@@ -66,8 +66,8 @@
66	66	byte 2 — major;
67	67
68	68	byte 3 — not used (set to 0).
69		-)))|(% style="width:96px" %)U8[4]
70		-|(% style="width:92px" %)**0x1000-0x1003**|(% style="width:94px" %)3|(% style="width:368px" %)(((
	62	+)))|(% style="width:124px" %)U8[4]
	63	+|(% style="width:137px" %)**0x1000-0x1003**|(% style="width:139px" %)3|(% style="width:805px" %)(((
71	71	Current time on the device clock:
72	72
73	73	byte 0 — day (BCD);
...	...	@@ -81,8 +81,8 @@
81	81	byte 4 — minutes (BCD);
82	82
83	83	byte 5 — seconds (BCD).
84		-)))|(% style="width:96px" %)U8[6]
85		-|(% style="width:92px" %)**0x2000**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	77	+)))|(% style="width:124px" %)U8[6]
	78	+|(% style="width:137px" %)**0x2000**|(% style="width:139px" %)1|(% style="width:805px" %)(((
86	86	Discrete input signals 1 (bitfield):
87	87
88	88	bit 0 — "Battery cover";
...	...	@@ -116,11 +116,11 @@
116	116	bit 14 – “Interlock”;
117	117
118	118	bit 15 – “Fuse 1”.
119		-)))|(% style="width:96px" %)U16
120		-|(% style="width:92px" %)**0x2001-0x2002**|(% style="width:94px" %)2|(% style="width:368px" %)Current measured by the primary sensor, А|(% style="width:96px" %)REAL32
121		-|(% style="width:92px" %)**0x2003-0x2004**|(% style="width:94px" %)2|(% style="width:368px" %)External temperature, °C|(% style="width:96px" %)REAL32
122		-|(% style="width:92px" %)**0x2005-0x2006**|(% style="width:94px" %)2|(% style="width:368px" %)Humidity, RH%|(% style="width:96px" %)REAL32
123		-|(% style="width:92px" %)**0x2007-0x2008**|(% style="width:94px" %)2|(% style="width:368px" %)(((
	112	+)))|(% style="width:124px" %)U16
	113	+|(% style="width:137px" %)**0x2001-0x2002**|(% style="width:139px" %)2|(% style="width:805px" %)Current measured by the primary sensor, А|(% style="width:124px" %)REAL32
	114	+|(% style="width:137px" %)**0x2003-0x2004**|(% style="width:139px" %)2|(% style="width:805px" %)External temperature, °C|(% style="width:124px" %)REAL32
	115	+|(% style="width:137px" %)**0x2005-0x2006**|(% style="width:139px" %)2|(% style="width:805px" %)Humidity, RH%|(% style="width:124px" %)REAL32
	116	+|(% style="width:137px" %)**0x2007-0x2008**|(% style="width:139px" %)2|(% style="width:805px" %)(((
124	124	Errors 1 (bitfield):
125	125
126	126	bit 0 – “Overcurrent”;
...	...	@@ -184,8 +184,8 @@
184	184	bit 29 – “Spirit offline”, connection with the Spirit truck is lost;
185	185
186	186	bits 30–31 – reserved.
187		-)))|(% style="width:96px" %)U32
188		-|(% style="width:92px" %)**0x2009-0x200A**|(% style="width:94px" %)2|(% style="width:368px" %)(((
	180	+)))|(% style="width:124px" %)U32
	181	+|(% style="width:137px" %)**0x2009-0x200A**|(% style="width:139px" %)2|(% style="width:805px" %)(((
189	189	Internal signals (bitfield):
190	190
191	191	bit 0 — "Low SOC";
...	...	@@ -240,13 +240,9 @@
240	240
241	241	bit 25 – “Power up”;
242	242
243		-bit 26 — signal “External 1”;
244		-
245		-bit 27 — signal “Heater (AUX)”;
246		-
247		-bits 28-31 — not used.
248		-)))|(% style="width:96px" %)U32
249		-|(% style="width:92px" %)**0x200B**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	236	+bits 26-31 – reserved.
	237	+)))|(% style="width:124px" %)U32
	238	+|(% style="width:137px" %)**0x200B**|(% style="width:139px" %)1|(% style="width:805px" %)(((
250	250	Discrete output signals (bitfield):
251	251
252	252	bit 0 — state of the output #1;
...	...	@@ -258,8 +258,8 @@
258	258	bit 3 — state of the output #4;
259	259
260	260	bits 4-15 — not used.
261		-)))|(% style="width:96px" %)U16
262		-|(% style="width:92px" %)**0x200C**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	250	+)))|(% style="width:124px" %)U16
	251	+|(% style="width:137px" %)**0x200C**|(% style="width:139px" %)1|(% style="width:805px" %)(((
263	263	Relay states (bitfield):
264	264
265	265	bit 0 — state of the relay #1;
...	...	@@ -271,8 +271,8 @@
271	271	bit 3 — state of the relay #4;
272	272
273	273	bits 4-15 — not used.
274		-)))|(% style="width:96px" %)U16
275		-|(% style="width:92px" %)**0x200E-0x200F**|(% style="width:94px" %)2|(% style="width:368px" %)(((
	263	+)))|(% style="width:124px" %)U16
	264	+|(% style="width:137px" %)**0x200E**|(% style="width:139px" %)2|(% style="width:805px" %)(((
276	276	Errors 2 (bitfield):
277	277
278	278	bit 0 – "Low CH temperature", temperature is too low for charging;
...	...	@@ -303,18 +303,10 @@
303	303
304	304	bit 13 – “General error”;
305	305
306		-bit 14 — reserved (set to 0);
307		-
308		-bit 15 — reserved (set to 0);
309		-
310		-bit 16 — reserved (set to 0);
311		-
312		-bit 17 — “Precharge error”;
313		-
314		-bits 18-31 — not used.
315		-)))|(% style="width:96px" %)U32
316		-|(% style="width:92px" %)**0x2010**|(% style="width:94px" %)1|(% style="width:368px" %)Address or the BMS Logic device whose parameters are in registers 0x2011-0x20C9|(% style="width:96px" %)U16
317		-|(% style="width:92px" %)**0x2011**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	295	+bits 14-31 — reserved.
	296	+)))|(% style="width:124px" %)U32
	297	+|(% style="width:137px" %)**0x2010**|(% style="width:139px" %)1|(% style="width:805px" %)Address or the BMS Logic device whose parameters are in registers 0x2011-0x20C9|(% style="width:124px" %)U16
	298	+|(% style="width:137px" %)**0x2011**|(% style="width:139px" %)1|(% style="width:805px" %)(((
318	318	State of the BMS Logic (bitfield):
319	319
320	320	bit 0 — device is present;
...	...	@@ -334,14 +334,14 @@
334	334	bit 7 — temperature sensor #2 is shorted;
335	335
336	336	bits 8-15 — reserved.
337		-)))|(% style="width:96px" %)U16
338		-|(% style="width:92px" %)**0x2012-0x2013**|(% style="width:94px" %)2|(% style="width:368px" %)Temperature of the BMS Logic, °C|(% style="width:96px" %)REAL32
339		-|(% style="width:92px" %)**0x2014-0x2015**|(% style="width:94px" %)2|(% style="width:368px" %)(((
	318	+)))|(% style="width:124px" %)U16
	319	+|(% style="width:137px" %)**0x2012-0x2013**|(% style="width:139px" %)2|(% style="width:805px" %)Temperature of the BMS Logic, °C|(% style="width:124px" %)REAL32
	320	+|(% style="width:137px" %)**0x2014-0x2015**|(% style="width:139px" %)2|(% style="width:805px" %)(((
340	340	Cell balancing flags (bitfield):
341	341
342	342	bit i — balancing resistor is connected to the i^^th^^ cell.
343		-)))|(% style="width:96px" %)U32
344		-|(% style="width:92px" %)**0x2016-0x2029**|(% style="width:94px" %)20|(% style="width:368px" %)(((
	324	+)))|(% style="width:124px" %)U32
	325	+|(% style="width:137px" %)**0x2016-0x2029**|(% style="width:139px" %)20|(% style="width:805px" %)(((
345	345	Array of cells states. Each element of the array corresponds to a cell and is a bitfield:
346	346
347	347	bit 0 — cell is present;
...	...	@@ -357,99 +357,93 @@
357	357	bit 5 — wires are connected to the cell;
358	358
359	359	bits 6-15 — reserved.
360		-)))|(% style="width:96px" %)U16[20]
361		-|(% style="width:92px" %)**0x202A-0x2051**|(% style="width:94px" %)40|(% style="width:368px" %)Array of cells voltages (V)|(% style="width:96px" %)REAL32[20]
362		-|(% style="width:92px" %)**0x2052-0x2079**|(% style="width:94px" %)40|(% style="width:368px" %)Array of cells temperatures (°C)|(% style="width:96px" %)REAL32[20]
363		-|(% style="width:92px" %)**0x207A-0x20A1**|(% style="width:94px" %)40|(% style="width:368px" %)Array of cells SOCs ~(%)|(% style="width:96px" %)REAL32[20]
364		-|(% style="width:92px" %)**0x20A2-0x20C9**|(% style="width:94px" %)40|(% style="width:368px" %)Array of cells resistances (Ohm)|(% style="width:96px" %)REAL32[20]
365		-|(% style="width:92px" %)**0x20F4**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	341	+)))|(% style="width:124px" %)U16[20]
	342	+|(% style="width:137px" %)**0x202A-0x2051**|(% style="width:139px" %)40|(% style="width:805px" %)Array of cells voltages (V)|(% style="width:124px" %)REAL32[20]
	343	+|(% style="width:137px" %)**0x2052-0x2079**|(% style="width:139px" %)40|(% style="width:805px" %)Array of cells temperatures (°C)|(% style="width:124px" %)REAL32[20]
	344	+|(% style="width:137px" %)**0x207A-0x20A1**|(% style="width:139px" %)40|(% style="width:805px" %)Array of cells SOCs ~(%)|(% style="width:124px" %)REAL32[20]
	345	+|(% style="width:137px" %)**0x20A2-0x20C9**|(% style="width:139px" %)40|(% style="width:805px" %)Array of cells resistances (Ohm)|(% style="width:124px" %)REAL32[20]
	346	+|(% style="width:137px" %)**0x20F4**|(% style="width:139px" %)1|(% style="width:805px" %)(((
366	366	Discrete input signals 2 (bitfield):
367	367
368		-bit 0 — “Fuse 2”;
	349	+bit 0 – “Fuse 2”;
369	369
370		-bit 1 — “Fuse 3”;
	351	+bit 1 – “Fuse 3”;
371	371
372		-bit 2 — “Circuit breaker status”;
	353	+bit 2 – “Circuit breaker status”;
373	373
374		-bit 3 — signal "Balancing request";
375		-
376		-bit 4 — signal "Close Main contactor";
377		-
378		-bit 5 — signal "Close External 1";
379		-
380		-bits 6-15 — not used.
381		-)))|(% style="width:96px" %)U16
382		-|(% style="width:92px" %)**0x2100-0x2101**|(% style="width:94px" %)2|(% style="width:368px" %)Battery state of charge (SOC), %|(% style="width:96px" %)REAL32
383		-|(% style="width:92px" %)**0x2102**|(% style="width:94px" %)1|(% style="width:368px" %)Number of BMS Logic devices|(% style="width:96px" %)U16
384		-|(% style="width:92px" %)**0x2103**|(% style="width:94px" %)1|(% style="width:368px" %)Number of cells|(% style="width:96px" %)U16
385		-|(% style="width:92px" %)**0x2104-0x2105**|(% style="width:94px" %)2|(% style="width:368px" %)Battery voltage, V|(% style="width:96px" %)REAL32
386		-|(% style="width:92px" %)**0x2106-0x2107**|(% style="width:94px" %)2|(% style="width:368px" %)Battery resistance, Ohm|(% style="width:96px" %)REAL32
387		-|(% style="width:92px" %)**0x2108-0x2109**|(% style="width:94px" %)2|(% style="width:368px" %)Effective capacity, A×h|(% style="width:96px" %)REAL32
388		-|(% style="width:92px" %)**0x210A-0x210B**|(% style="width:94px" %)2|(% style="width:368px" %)Balancing effectivity, %|(% style="width:96px" %)REAL32
389		-|(% style="width:92px" %)**0x210C-0x210D**|(% style="width:94px" %)2|(% style="width:368px" %)State of health, %|(% style="width:96px" %)REAL32
390		-|(% style="width:92px" %)**0x210E-0x210F**|(% style="width:94px" %)2|(% style="width:368px" %)Depth of discharge, A×h|(% style="width:96px" %)REAL32
391		-|(% style="width:92px" %)**0x2110-0x2111**|(% style="width:94px" %)2|(% style="width:368px" %)Minimum BMS Logic temperature|(% style="width:96px" %)REAL32
392		-|(% style="width:92px" %)**0x2112**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device whose temperature is minimal|(% style="width:96px" %)U16
393		-|(% style="width:92px" %)**0x2113-0x2114**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum BMS Logic temperature|(% style="width:96px" %)REAL32
394		-|(% style="width:92px" %)**0x2115**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device whose temperature is maximal|(% style="width:96px" %)U16
395		-|(% style="width:92px" %)**0x2116-0x2117**|(% style="width:94px" %)2|(% style="width:368px" %)BMS Logic polling rate, commands pre second|(% style="width:96px" %)REAL32
396		-|(% style="width:92px" %)**0x2118-0x2119**|(% style="width:94px" %)2|(% style="width:368px" %)Minimum cell temperature|(% style="width:96px" %)REAL32
397		-|(% style="width:92px" %)**0x211A**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device which is connected to the cell whose temperature is minimal|(% style="width:96px" %)U16
398		-|(% style="width:92px" %)**0x211B**|(% style="width:94px" %)1|(% style="width:368px" %)Position of the cell whose temperature is minimal|(% style="width:96px" %)U16
399		-|(% style="width:92px" %)**0x211C-0x211D**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum cell temperature|(% style="width:96px" %)REAL32
400		-|(% style="width:92px" %)**0x211E**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device which is connected to the cell whose temperature is maximal|(% style="width:96px" %)U16
401		-|(% style="width:92px" %)**0x211F**|(% style="width:94px" %)1|(% style="width:368px" %)Position of the cell whose temperature is maximal|(% style="width:96px" %)U16
402		-|(% style="width:92px" %)**0x2120-0x2121**|(% style="width:94px" %)2|(% style="width:368px" %)Minimum cell voltage|(% style="width:96px" %)REAL32
403		-|(% style="width:92px" %)**0x2122**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device which is connected to the cell whose voltage is minimal|(% style="width:96px" %)U16
404		-|(% style="width:92px" %)**0x2123**|(% style="width:94px" %)1|(% style="width:368px" %)Position of the cell whose voltage is minimal|(% style="width:96px" %)U16
405		-|(% style="width:92px" %)**0x2124-0x2125**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum cell voltage|(% style="width:96px" %)REAL32
406		-|(% style="width:92px" %)**0x2126**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device which is connected to the cell whose voltage is maximal|(% style="width:96px" %)U16
407		-|(% style="width:92px" %)**0x2127**|(% style="width:94px" %)1|(% style="width:368px" %)Position of the cell whose voltage is maximal|(% style="width:96px" %)U16
408		-|(% style="width:92px" %)**0x2128**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	355	+bits 3-15 – reserved.
	356	+)))|(% style="width:124px" %)U16
	357	+|(% style="width:137px" %)**0x2100-0x2101**|(% style="width:139px" %)2|(% style="width:805px" %)Battery state of charge (SOC), %|(% style="width:124px" %)REAL32
	358	+|(% style="width:137px" %)**0x2102**|(% style="width:139px" %)1|(% style="width:805px" %)Number of BMS Logic devices|(% style="width:124px" %)U16
	359	+|(% style="width:137px" %)**0x2103**|(% style="width:139px" %)1|(% style="width:805px" %)Number of cells|(% style="width:124px" %)U16
	360	+|(% style="width:137px" %)**0x2104-0x2105**|(% style="width:139px" %)2|(% style="width:805px" %)Battery voltage, V|(% style="width:124px" %)REAL32
	361	+|(% style="width:137px" %)**0x2106-0x2107**|(% style="width:139px" %)2|(% style="width:805px" %)Battery resistance, Ohm|(% style="width:124px" %)REAL32
	362	+|(% style="width:137px" %)**0x2108-0x2109**|(% style="width:139px" %)2|(% style="width:805px" %)Effective capacity, A×h|(% style="width:124px" %)REAL32
	363	+|(% style="width:137px" %)**0x210A-0x210B**|(% style="width:139px" %)2|(% style="width:805px" %)Balancing effectivity, %|(% style="width:124px" %)REAL32
	364	+|(% style="width:137px" %)**0x210C-0x210D**|(% style="width:139px" %)2|(% style="width:805px" %)State of health, %|(% style="width:124px" %)REAL32
	365	+|(% style="width:137px" %)**0x210E-0x210F**|(% style="width:139px" %)2|(% style="width:805px" %)Depth of discharge, A×h|(% style="width:124px" %)REAL32
	366	+|(% style="width:137px" %)**0x2110-0x2111**|(% style="width:139px" %)2|(% style="width:805px" %)Minimum BMS Logic temperature|(% style="width:124px" %)REAL32
	367	+|(% style="width:137px" %)**0x2112**|(% style="width:139px" %)1|(% style="width:805px" %)Address of the BMS Logic device whose temperature is minimal|(% style="width:124px" %)U16
	368	+|(% style="width:137px" %)**0x2113-0x2114**|(% style="width:139px" %)2|(% style="width:805px" %)Maximum BMS Logic temperature|(% style="width:124px" %)REAL32
	369	+|(% style="width:137px" %)**0x2115**|(% style="width:139px" %)1|(% style="width:805px" %)Address of the BMS Logic device whose temperature is maximal|(% style="width:124px" %)U16
	370	+|(% style="width:137px" %)**0x2116-0x2117**|(% style="width:139px" %)2|(% style="width:805px" %)BMS Logic polling rate, commands pre second|(% style="width:124px" %)REAL32
	371	+|(% style="width:137px" %)**0x2118-0x2119**|(% style="width:139px" %)2|(% style="width:805px" %)Minimum cell temperature|(% style="width:124px" %)REAL32
	372	+|(% style="width:137px" %)**0x211A**|(% style="width:139px" %)1|(% style="width:805px" %)Address of the BMS Logic device which is connected to the cell whose temperature is minimal|(% style="width:124px" %)U16
	373	+|(% style="width:137px" %)**0x211B**|(% style="width:139px" %)1|(% style="width:805px" %)Position of the cell whose temperature is minimal|(% style="width:124px" %)U16
	374	+|(% style="width:137px" %)**0x211C-0x211D**|(% style="width:139px" %)2|(% style="width:805px" %)Maximum cell temperature|(% style="width:124px" %)REAL32
	375	+|(% style="width:137px" %)**0x211E**|(% style="width:139px" %)1|(% style="width:805px" %)Address of the BMS Logic device which is connected to the cell whose temperature is maximal|(% style="width:124px" %)U16
	376	+|(% style="width:137px" %)**0x211F**|(% style="width:139px" %)1|(% style="width:805px" %)Position of the cell whose temperature is maximal|(% style="width:124px" %)U16
	377	+|(% style="width:137px" %)**0x2120-0x2121**|(% style="width:139px" %)2|(% style="width:805px" %)Minimum cell voltage|(% style="width:124px" %)REAL32
	378	+|(% style="width:137px" %)**0x2122**|(% style="width:139px" %)1|(% style="width:805px" %)Address of the BMS Logic device which is connected to the cell whose voltage is minimal|(% style="width:124px" %)U16
	379	+|(% style="width:137px" %)**0x2123**|(% style="width:139px" %)1|(% style="width:805px" %)Position of the cell whose voltage is minimal|(% style="width:124px" %)U16
	380	+|(% style="width:137px" %)**0x2124-0x2125**|(% style="width:139px" %)2|(% style="width:805px" %)Maximum cell voltage|(% style="width:124px" %)REAL32
	381	+|(% style="width:137px" %)**0x2126**|(% style="width:139px" %)1|(% style="width:805px" %)Address of the BMS Logic device which is connected to the cell whose voltage is maximal|(% style="width:124px" %)U16
	382	+|(% style="width:137px" %)**0x2127**|(% style="width:139px" %)1|(% style="width:805px" %)Position of the cell whose voltage is maximal|(% style="width:124px" %)U16
	383	+|(% style="width:137px" %)**0x2128**|(% style="width:139px" %)1|(% style="width:805px" %)(((
409	409	Error flag:
410	410
411	411	0 — no errors;
412	412
413	413	1 — there are some errors.
414		-)))|(% style="width:96px" %)U16
415		-|(% style="width:92px" %)**0x2130-0x2131**|(% style="width:94px" %)2|(% style="width:368px" %)Energy received from the charger, W×h|(% style="width:96px" %)REAL32
416		-|(% style="width:92px" %)**0x2132-0x2133**|(% style="width:94px" %)2|(% style="width:368px" %)Energy consumed by the load, W×h|(% style="width:96px" %)REAL32
417		-|(% style="width:92px" %)**0x2134-0x2135**|(% style="width:94px" %)2|(% style="width:368px" %)Energy dissipated by the balancing resistors, W×h|(% style="width:96px" %)REAL32
418		-|(% style="width:92px" %)**0x2140**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	389	+)))|(% style="width:124px" %)U16
	390	+|(% style="width:137px" %)**0x2130-0x2131**|(% style="width:139px" %)2|(% style="width:805px" %)Energy received from the charger, W×h|(% style="width:124px" %)REAL32
	391	+|(% style="width:137px" %)**0x2132-0x2133**|(% style="width:139px" %)2|(% style="width:805px" %)Energy consumed by the load, W×h|(% style="width:124px" %)REAL32
	392	+|(% style="width:137px" %)**0x2134-0x2135**|(% style="width:139px" %)2|(% style="width:805px" %)Energy dissipated by the balancing resistors, W×h|(% style="width:124px" %)REAL32
	393	+|(% style="width:137px" %)**0x2140**|(% style="width:139px" %)1|(% style="width:805px" %)(((
419	419	SD-card mounting flag:
420	420
421	421	0 — not mounted;
422	422
423	423	1 — mounted.
424		-)))|(% style="width:96px" %)U16
425		-|(% style="width:92px" %)**0x2141**|(% style="width:94px" %)1|(% style="width:368px" %)Reserved|(% style="width:96px" %)U16
426		-|(% style="width:92px" %)**0x2142**|(% style="width:94px" %)1|(% style="width:368px" %)Reserved|(% style="width:96px" %)U16
427		-|(% style="width:92px" %)**0x2170**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	399	+)))|(% style="width:124px" %)U16
	400	+|(% style="width:137px" %)**0x2141**|(% style="width:139px" %)1|(% style="width:805px" %)Reserved|(% style="width:124px" %)U16
	401	+|(% style="width:137px" %)**0x2142**|(% style="width:139px" %)1|(% style="width:805px" %)Reserved|(% style="width:124px" %)U16
	402	+|(% style="width:137px" %)**0x2170**|(% style="width:139px" %)1|(% style="width:805px" %)(((
428	428	Wi-Fi connection status:
429	429
430	430	0 — no connection;
431	431
432	432	1 — connection is established.
433		-)))|(% style="width:96px" %)U16
434		-|(% style="width:92px" %)**0x2171-0x2172**|(% style="width:94px" %)2|(% style="width:368px" %)IP-address in the Wi-Fi network|(% style="width:96px" %)U8[4]
435		-|(% style="width:92px" %)**0x2173-0x2175**|(% style="width:94px" %)3|(% style="width:368px" %)MAC-address of the Wi-Fi module|(% style="width:96px" %)U8[6]
436		-|(% style="width:92px" %)**0x2179-0x217A**|(% style="width:94px" %)2|(% style="width:368px" %)Instant effective capacity, A×h|(% style="width:96px" %)REAL32
437		-|(% style="width:92px" %)**0x217B-0x217C**|(% style="width:94px" %)2|(% style="width:368px" %)Coulomb received from the charger, A×h|(% style="width:96px" %)REAL32
438		-|(% style="width:92px" %)**0x217D-0x217E**|(% style="width:94px" %)2|(% style="width:368px" %)Coulomb consumed by the load, A×h|(% style="width:96px" %)REAL32
439		-|(% style="width:92px" %)**0x217F-0x2180**|(% style="width:94px" %)2|(% style="width:368px" %)Ethernet IP-address|(% style="width:96px" %)U8[4]
440		-|(% style="width:92px" %)**0x2181-0x2182**|(% style="width:94px" %)2|(% style="width:368px" %)Ethernet netmask|(% style="width:96px" %)U8[4]
441		-|(% style="width:92px" %)**0x2183-0x2184**|(% style="width:94px" %)2|(% style="width:368px" %)Ethernet gateway|(% style="width:96px" %)U8[4]
442		-|(% style="width:92px" %)**0x2185-0x2186**|(% style="width:94px" %)2|(% style="width:368px" %)Calibrated voltage in the reference line of the current sensor, V|(% style="width:96px" %)REAL32
443		-|(% style="width:92px" %)**0x218E-0x218F**|(% style="width:94px" %)2|(% style="width:368px" %)Voltage from the current sensor, V|(% style="width:96px" %)REAL32
444		-|(% style="width:92px" %)**0x2190-0x2191**|(% style="width:94px" %)2|(% style="width:368px" %)Voltage in the reference line of the current sensor, V|(% style="width:96px" %)REAL32
445		-|(% style="width:92px" %)**0x2192-0x2193**|(% style="width:94px" %)2|(% style="width:368px" %)Voltage from the auxiliary current sensor, V|(% style="width:96px" %)REAL32
446		-|(% style="width:92px" %)**0x2194-0x2195**|(% style="width:94px" %)2|(% style="width:368px" %)Voltage in the reference line of the auxiliary current sensor, V|(% style="width:96px" %)REAL32
447		-|(% style="width:92px" %)**0x219F-0x21A0**|(% style="width:94px" %)2|(% style="width:368px" %)Charge current limit, A|(% style="width:96px" %)REAL32
448		-|(% style="width:92px" %)**0x21A1-0x21A2**|(% style="width:94px" %)2|(% style="width:368px" %)Discharge current limit, A|(% style="width:96px" %)REAL32
449		-|(% style="width:92px" %)**0x21B8**|(% style="width:94px" %)1|(% style="width:368px" %)Flag indicating that the cells are balancing|(% style="width:96px" %)U16
450		-|(% style="width:92px" %)**0x21C6-0x21C7**|(% style="width:94px" %)2|(% style="width:368px" %)Calibrated voltage in the reference line of the auxiliary current sensor, V|(% style="width:96px" %)REAL32
451		-|(% style="width:92px" %)**0x21CA-0x21CB**|(% style="width:94px" %)2|(% style="width:368px" %)Average cell voltage, V|(% style="width:96px" %)REAL32
452		-|(% style="width:92px" %)**0x2200-0x2203**|(% style="width:94px" %)4|(% style="width:368px" %)(((
	408	+)))|(% style="width:124px" %)U16
	409	+|(% style="width:137px" %)**0x2171-0x2172**|(% style="width:139px" %)2|(% style="width:805px" %)IP-address in the Wi-Fi network|(% style="width:124px" %)U8[4]
	410	+|(% style="width:137px" %)**0x2173-0x2175**|(% style="width:139px" %)3|(% style="width:805px" %)MAC-address of the Wi-Fi module|(% style="width:124px" %)U8[6]
	411	+|(% style="width:137px" %)**0x2179-0x217A**|(% style="width:139px" %)2|(% style="width:805px" %)Instant effective capacity, A×h|(% style="width:124px" %)REAL32
	412	+|(% style="width:137px" %)**0x217B-0x217C**|(% style="width:139px" %)2|(% style="width:805px" %)Coulomb received from the charger, A×h|(% style="width:124px" %)REAL32
	413	+|(% style="width:137px" %)**0x217D-0x217E**|(% style="width:139px" %)2|(% style="width:805px" %)Coulomb consumed by the load, A×h|(% style="width:124px" %)REAL32
	414	+|(% style="width:137px" %)**0x217F-0x2180**|(% style="width:139px" %)2|(% style="width:805px" %)Ethernet IP-address|(% style="width:124px" %)U8[4]
	415	+|(% style="width:137px" %)**0x2181-0x2182**|(% style="width:139px" %)2|(% style="width:805px" %)Ethernet netmask|(% style="width:124px" %)U8[4]
	416	+|(% style="width:137px" %)**0x2183-0x2184**|(% style="width:139px" %)2|(% style="width:805px" %)Ethernet gateway|(% style="width:124px" %)U8[4]
	417	+|(% style="width:137px" %)**0x2185-0x2186**|(% style="width:139px" %)2|(% style="width:805px" %)Calibrated voltage in the reference line of the current sensor, V|(% style="width:124px" %)REAL32
	418	+|(% style="width:137px" %)**0x218E**|(% style="width:139px" %)2|(% style="width:805px" %)Voltage from the current sensor, V|(% style="width:124px" %)REAL32
	419	+|(% style="width:137px" %)**0x2190**|(% style="width:139px" %)2|(% style="width:805px" %)Voltage in the reference line of the current sensor, V|(% style="width:124px" %)REAL32
	420	+|(% style="width:137px" %)**0x2192**|(% style="width:139px" %)2|(% style="width:805px" %)Voltage from the auxiliary current sensor, V|(% style="width:124px" %)REAL32
	421	+|(% style="width:137px" %)**0x2194**|(% style="width:139px" %)2|(% style="width:805px" %)Voltage in the reference line of the auxiliary current sensor, V|(% style="width:124px" %)REAL32
	422	+|(% style="width:137px" %)**0x219F**|(% style="width:139px" %)2|(% style="width:805px" %)Charge current limit, A|(% style="width:124px" %)REAL32
	423	+|(% style="width:137px" %)**0x21A1**|(% style="width:139px" %)2|(% style="width:805px" %)Discharge current limit, A|(% style="width:124px" %)REAL32
	424	+|(% style="width:137px" %)**0x21B8**|(% style="width:139px" %)1|(% style="width:805px" %)Flag indicating that the cells are balancing|(% style="width:124px" %)U16
	425	+|(% style="width:137px" %)**0x21C6**|(% style="width:139px" %)2|(% style="width:805px" %)Calibrated voltage in the reference line of the auxiliary current sensor, V|(% style="width:124px" %)REAL32
	426	+|(% style="width:137px" %)**0x21CA**|(% style="width:139px" %)2|(% style="width:805px" %)Average cell voltage, V|(% style="width:124px" %)REAL32
	427	+|(% style="width:137px" %)**0x2200-0x2203**|(% style="width:139px" %)4|(% style="width:805px" %)(((
453	453	Record #1 from the errors journal. First 32-bit word contains a timestamp, second 32-bit word contains errors 1 flags (see 0x2007-0x2008).
454	454
455	455	Timestamp format:
...	...	@@ -465,22 +465,22 @@
465	465	bits 20-25 — minutes;
466	466
467	467	bits 26-31 — seconds.
468		-)))|(% style="width:96px" %)U32[2]
469		-|(% style="width:92px" %)**0x2204-0x2207**|(% style="width:94px" %)4|(% style="width:368px" %)Record #2 from the errors journal|(% style="width:96px" %)U32[2]
470		-|(% style="width:92px" %)**0x2208-0x227B**|(% style="width:94px" %) |(% style="width:368px" %)Records #3-31 from the errors journal|(% style="width:96px" %)
471		-|(% style="width:92px" %)**0x227C-0x227F**|(% style="width:94px" %)4|(% style="width:368px" %)Record #32 from the errors journal|(% style="width:96px" %)U32[2]
472		-|(% style="width:92px" %)**0x2300**|(% style="width:94px" %)1|(% style="width:368px" %)Number of the last record from the errors journal (1..32)|(% style="width:96px" %)U16
473		-|(% style="width:92px" %)**0x2380-0x2383**|(% style="width:94px" %)4|(% style="width:368px" %)Record data #1 from the errors journal. First 32-bit word contains errors 2 flags (see 0x200E-0x200F).|(% style="width:96px" %)U32[2]
474		-|(% style="width:92px" %)**0x2384-0x2387**|(% style="width:94px" %)4|(% style="width:368px" %)Record data #2 from the errors journal|(% style="width:96px" %)U32[2]
475		-|(% style="width:92px" %)**0x2388-0x23FB**|(% style="width:94px" %) |(% style="width:368px" %)Records data #3-31 from the errors journal|(% style="width:96px" %)
476		-|(% style="width:92px" %)**0x23FC-0x23FF**|(% style="width:94px" %)4|(% style="width:368px" %)Record data #32 from the errors journal|(% style="width:96px" %)U32[2]
477		-|(% style="width:92px" %)**0x2400-0x2401**|(% style="width:94px" %)2|(% style="width:368px" %)Current measured by the auxiliary current sensor, A|(% style="width:96px" %)REAL32
478		-|(% style="width:92px" %)**0x2402-0x2403**|(% style="width:94px" %)2|(% style="width:368px" %)(((
	443	+)))|(% style="width:124px" %)U32[2]
	444	+|(% style="width:137px" %)**0x2204-0x2207**|(% style="width:139px" %)4|(% style="width:805px" %)Record #2 from the errors journal|(% style="width:124px" %)U32[2]
	445	+|(% style="width:137px" %)**0x2208-0x227B**|(% style="width:139px" %) |(% style="width:805px" %)Records #3-31 from the errors journal|(% style="width:124px" %)
	446	+|(% style="width:137px" %)**0x227C-0x227F**|(% style="width:139px" %)4|(% style="width:805px" %)Record #32 from the errors journal|(% style="width:124px" %)U32[2]
	447	+|(% style="width:137px" %)**0x2300**|(% style="width:139px" %)1|(% style="width:805px" %)Number of the last record from the errors journal (1..32)|(% style="width:124px" %)U16
	448	+|(% style="width:137px" %)**0x2380**|(% style="width:139px" %)4|(% style="width:805px" %)Record data #1 from the errors journal. First 32-bit word contains errors 2 flags (see 0x200E-0x200F).|(% style="width:124px" %)U32[2]
	449	+|(% style="width:137px" %)**0x2384-0x2387**|(% style="width:139px" %)4|(% style="width:805px" %)Record data #2 from the errors journal|(% style="width:124px" %)U32[2]
	450	+|(% style="width:137px" %)**0x2388-0x23FB**|(% style="width:139px" %) |(% style="width:805px" %)Records data #3-31 from the errors journal|(% style="width:124px" %)
	451	+|(% style="width:137px" %)**0x23FC-0x23FF**|(% style="width:139px" %)4|(% style="width:805px" %)Record data #32 from the errors journal|(% style="width:124px" %)U32[2]
	452	+|(% style="width:137px" %)**0x2400**|(% style="width:139px" %)2|(% style="width:805px" %)Current measured by the auxiliary current sensor, A|(% style="width:124px" %)REAL32
	453	+|(% style="width:137px" %)**0x2402**|(% style="width:139px" %)2|(% style="width:805px" %)(((
479	479	Final battery current, A
480	480
481	481	Note — Typically it is the sum of the values measured by the main and auxiliary current sensors
482		-)))|(% style="width:96px" %)REAL32
483		-|(% style="width:92px" %)**0x2410**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	457	+)))|(% style="width:124px" %)REAL32
	458	+|(% style="width:137px" %)**0x2410**|(% style="width:139px" %)1|(% style="width:805px" %)(((
484	484	Battery state:
485	485
486	486	0 – Unknown;
...	...	@@ -496,20 +496,19 @@
496	496	5 – Discharging OFF;
497	497
498	498	6 – Relaxed (after discharging).
499		-)))|(% style="width:96px" %)U16
500		-|(% style="width:92px" %)**0x2411-0x2412**|(% style="width:94px" %)2|(% style="width:368px" %)Duration of the battery state (0x2410), seconds|(% style="width:96px" %)U32
501		-|(% style="width:92px" %)**0x2420-0x2421**|(% style="width:94px" %)2|(% style="width:368px" %)Nominal battery capacity, A×h|(% style="width:96px" %)REAL32
502		-|(% style="width:92px" %)**0x2422-0x2423**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum charge voltage, V|(% style="width:96px" %)REAL32
503		-|(% style="width:92px" %)**0x2424-0x2425**|(% style="width:94px" %)2|(% style="width:368px" %)Minimum discharge voltage, V|(% style="width:96px" %)REAL32
504		-|(% style="width:92px" %)**0x2426-0x2427**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum charge current, A|(% style="width:96px" %)REAL32
505		-|(% style="width:92px" %)**0x2428-0x2429**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum discharge current, A|(% style="width:96px" %)REAL32
	474	+)))|(% style="width:124px" %)U16
	475	+|(% style="width:137px" %)**0x2411**|(% style="width:139px" %)2|(% style="width:805px" %)Duration of the battery state (0x2410), seconds|(% style="width:124px" %)U32
	476	+|(% style="width:137px" %)**0x2420**|(% style="width:139px" %)2|(% style="width:805px" %)Nominal battery capacity, A×h|(% style="width:124px" %)REAL32
	477	+|(% style="width:137px" %)**0x2422**|(% style="width:139px" %)2|(% style="width:805px" %)Maximum charge voltage, V|(% style="width:124px" %)REAL32
	478	+|(% style="width:137px" %)**0x2424**|(% style="width:139px" %)2|(% style="width:805px" %)Minimum discharge voltage, V|(% style="width:124px" %)REAL32
	479	+|(% style="width:137px" %)**0x2426**|(% style="width:139px" %)2|(% style="width:805px" %)Maximum charge current, A|(% style="width:124px" %)REAL32
	480	+|(% style="width:137px" %)**0x2428**|(% style="width:139px" %)2|(% style="width:805px" %)Maximum discharge current, A|(% style="width:124px" %)REAL32
506	506
507		-=== Holding registers ===
	482	+== 4.2.3 Holding registers ==
508	508
509		-(% style="width:653px" %)
510		-|(% style="width:92px" %)**Register address**|(% style="width:94px" %)**Number of registers**|(% style="width:368px" %)**Content**|(% style="width:96px" %)**Type**
511		-|(% style="width:92px" %)**0x4000**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device whose parameters should be in the input registers 0x2011-0x20C9|(% style="width:96px" %)U16
512		-|(% style="width:92px" %)**0x4100-0x4101**|(% style="width:94px" %)2|(% style="width:368px" %)(((
	484	+|(% style="width:158px" %)**Register address**|(% style="width:155px" %)**Number of registers**|(% style="width:999px" %)**Content**|(% style="width:146px" %)**Type**
	485	+|(% style="width:158px" %)**0x4000**|(% style="width:155px" %)1|(% style="width:999px" %)Address of the BMS Logic device whose parameters should be in the input registers 0x2011-0x20C9|(% style="width:146px" %)U16
	486	+|(% style="width:158px" %)**0x4100**|(% style="width:155px" %)2|(% style="width:999px" %)(((
513	513	Command to acknowledge errors in the errors journal (bitfield). Each //i//^^th^^ bit corresponds to (//i//+1) record.
514	514
515	515	Notes:
...	...	@@ -517,8 +517,8 @@
517	517	1 – After the errors are acknowledged, the register value will be set to 0.
518	518
519	519	2 – To acknowledge all errors, set 0xFFFFFFFF.
520		-)))|(% style="width:96px" %)U32
521		-|(% style="width:92px" %)**0x5100**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	494	+)))|(% style="width:146px" %)U32
	495	+|(% style="width:158px" %)**0x5100**|(% style="width:155px" %)1|(% style="width:999px" %)(((
522	522	Software control of the "Battery cover" signal. Allowable values:
523	523
524	524	0 – clear the signal;
...	...	@@ -526,8 +526,8 @@
526	526	1 – set the signal;
527	527
528	528	2-65535 – use the physical input "Battery cover".
529		-)))|(% style="width:96px" %)U16
530		-|(% style="width:92px" %)**0x5101**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	503	+)))|(% style="width:146px" %)U16
	504	+|(% style="width:158px" %)**0x5101**|(% style="width:155px" %)1|(% style="width:999px" %)(((
531	531	Software control of the "Charger connected" signal. Allowable values:
532	532
533	533	0 – clear the signal;
...	...	@@ -535,8 +535,8 @@
535	535	1 – set the signal;
536	536
537	537	2-65535 – use the physical input "Charger connected".
538		-)))|(% style="width:96px" %)U16
539		-|(% style="width:92px" %)**0x5102**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	512	+)))|(% style="width:146px" %)U16
	513	+|(% style="width:158px" %)**0x5102**|(% style="width:155px" %)1|(% style="width:999px" %)(((
540	540	Software control of the "Power down request" signal. Allowable values:
541	541
542	542	0 – clear the signal;
...	...	@@ -544,8 +544,8 @@
544	544	1 – set the signal;
545	545
546	546	2-65535 – use the physical input "Power down request".
547		-)))|(% style="width:96px" %)U16
548		-|(% style="width:92px" %)**0x5103**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	521	+)))|(% style="width:146px" %)U16
	522	+|(% style="width:158px" %)**0x5103**|(% style="width:155px" %)1|(% style="width:999px" %)(((
549	549	Software control of the "Inhibit charging" signal. Allowable values:
550	550
551	551	0 – clear the signal;
...	...	@@ -553,8 +553,8 @@
553	553	1 – set the signal;
554	554
555	555	2-65535 – use the physical input "Inhibit charging".
556		-)))|(% style="width:96px" %)U16
557		-|(% style="width:92px" %)**0x5104**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	530	+)))|(% style="width:146px" %)U16
	531	+|(% style="width:158px" %)**0x5104**|(% style="width:155px" %)1|(% style="width:999px" %)(((
558	558	Software control of the "Inhibit discharging" signal. Allowable values:
559	559
560	560	0 – clear the signal;
...	...	@@ -562,8 +562,8 @@
562	562	1 – set the signal;
563	563
564	564	2-65535 – use the physical input "Inhibit discharging".
565		-)))|(% style="width:96px" %)U16
566		-|(% style="width:92px" %)**0x5105**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	539	+)))|(% style="width:146px" %)U16
	540	+|(% style="width:158px" %)**0x5105**|(% style="width:155px" %)1|(% style="width:999px" %)(((
567	567	Software control of the "Charging contactor feedback" signal. Allowable values:
568	568
569	569	0 – clear the signal;
...	...	@@ -571,8 +571,8 @@
571	571	1 – set the signal;
572	572
573	573	2-65535 – use the physical input "Charging contactor feedback".
574		-)))|(% style="width:96px" %)U16
575		-|(% style="width:92px" %)**0x5106**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	548	+)))|(% style="width:146px" %)U16
	549	+|(% style="width:158px" %)**0x5106**|(% style="width:155px" %)1|(% style="width:999px" %)(((
576	576	Software control of the "Discharging contactor feedback" signal. Allowable values:
577	577
578	578	0 – clear the signal;
...	...	@@ -580,8 +580,8 @@
580	580	1 – set the signal;
581	581
582	582	2-65535 – use the physical input "Discharging contactor feedback".
583		-)))|(% style="width:96px" %)U16
584		-|(% style="width:92px" %)**0x5107**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	557	+)))|(% style="width:146px" %)U16
	558	+|(% style="width:158px" %)**0x5107**|(% style="width:155px" %)1|(% style="width:999px" %)(((
585	585	Software control of the "Insulation status" signal. Allowable values:
586	586
587	587	0 – clear the signal;
...	...	@@ -589,8 +589,8 @@
589	589	1 – set the signal;
590	590
591	591	2-65535 – use the physical input "Insulation status".
592		-)))|(% style="width:96px" %)U16
593		-|(% style="width:92px" %)**0x5108**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	566	+)))|(% style="width:146px" %)U16
	567	+|(% style="width:158px" %)**0x5108**|(% style="width:155px" %)1|(% style="width:999px" %)(((
594	594	Software control of the "Charge request" signal. Allowable values:
595	595
596	596	0 – clear the signal;
...	...	@@ -598,8 +598,8 @@
598	598	1 – set the signal;
599	599
600	600	2-65535 – use the physical input "Charge request".
601		-)))|(% style="width:96px" %)U16
602		-|(% style="width:92px" %)**0x5109**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	575	+)))|(% style="width:146px" %)U16
	576	+|(% style="width:158px" %)**0x5109**|(% style="width:155px" %)1|(% style="width:999px" %)(((
603	603	Software control of the "Precharge request" signal. Allowable values:
604	604
605	605	0 – clear the signal;
...	...	@@ -607,8 +607,8 @@
607	607	1 – set the signal;
608	608
609	609	2-65535 – use the physical input "Precharge request".
610		-)))|(% style="width:96px" %)U16
611		-|(% style="width:92px" %)**0x510A**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	584	+)))|(% style="width:146px" %)U16
	585	+|(% style="width:158px" %)**0x510A**|(% style="width:155px" %)1|(% style="width:999px" %)(((
612	612	Software control of the "Discharge request" signal. Allowable values:
613	613
614	614	0 – clear the signal;
...	...	@@ -616,8 +616,8 @@
616	616	1 – set the signal;
617	617
618	618	2-65535 – use the physical input "Discharge request".
619		-)))|(% style="width:96px" %)U16
620		-|(% style="width:92px" %)**0x510B**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	593	+)))|(% style="width:146px" %)U16
	594	+|(% style="width:158px" %)**0x510B**|(% style="width:155px" %)1|(% style="width:999px" %)(((
621	621	Software control of the "PCH contactor feedback" signal. Allowable values:
622	622
623	623	0 – clear the signal;
...	...	@@ -625,8 +625,8 @@
625	625	1 – set the signal;
626	626
627	627	2-65535 – use the physical input "PCH contactor feedback".
628		-)))|(% style="width:96px" %)U16
629		-|(% style="width:92px" %)**0x510C**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	602	+)))|(% style="width:146px" %)U16
	603	+|(% style="width:158px" %)**0x510C**|(% style="width:155px" %)1|(% style="width:999px" %)(((
630	630	Software control of the "CH/DCH contactor feedback" signal. Allowable values:
631	631
632	632	0 – clear the signal;
...	...	@@ -634,8 +634,8 @@
634	634	1 – set the signal;
635	635
636	636	2-65535 – use the physical input "CH/DCH contactor feedback".
637		-)))|(% style="width:96px" %)U16
638		-|(% style="width:92px" %)**0x510D**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	611	+)))|(% style="width:146px" %)U16
	612	+|(% style="width:158px" %)**0x510D**|(% style="width:155px" %)1|(% style="width:999px" %)(((
639	639	Software control of the "Main contactor feedback" signal. Allowable values:
640	640
641	641	0 – clear the signal;
...	...	@@ -643,8 +643,8 @@
643	643	1 – set the signal;
644	644
645	645	2-65535 – use the physical input "Main contactor feedback".
646		-)))|(% style="width:96px" %)U16
647		-|(% style="width:92px" %)**0x510E**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	620	+)))|(% style="width:146px" %)U16
	621	+|(% style="width:158px" %)**0x510E**|(% style="width:155px" %)1|(% style="width:999px" %)(((
648	648	Software control of the "Interlock" signal. Allowable values:
649	649
650	650	0 – clear the signal;
...	...	@@ -652,8 +652,8 @@
652	652	1 – set the signal;
653	653
654	654	2-65535 – use the physical input "Interlock".
655		-)))|(% style="width:96px" %)U16
656		-|(% style="width:92px" %)**0x510F**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	629	+)))|(% style="width:146px" %)U16
	630	+|(% style="width:158px" %)**0x510F**|(% style="width:155px" %)1|(% style="width:999px" %)(((
657	657	Software control of the "Fuse 1" signal. Allowable values:
658	658
659	659	0 – clear the signal;
...	...	@@ -661,8 +661,8 @@
661	661	1 – set the signal;
662	662
663	663	2-65535 – use the physical input "Fuse 1".
664		-)))|(% style="width:96px" %)U16
665		-|(% style="width:92px" %)**0x5110**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	638	+)))|(% style="width:146px" %)U16
	639	+|(% style="width:158px" %)**0x5110**|(% style="width:155px" %)1|(% style="width:999px" %)(((
666	666	Software control of the "Fuse 2" signal. Allowable values:
667	667
668	668	0 – clear the signal;
...	...	@@ -670,8 +670,8 @@
670	670	1 – set the signal;
671	671
672	672	2-65535 – use the physical input "Fuse 2".
673		-)))|(% style="width:96px" %)U16
674		-|(% style="width:92px" %)**0x5111**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	647	+)))|(% style="width:146px" %)U16
	648	+|(% style="width:158px" %)**0x5111**|(% style="width:155px" %)1|(% style="width:999px" %)(((
675	675	Software control of the "Fuse 3" signal. Allowable values:
676	676
677	677	0 – clear the signal;
...	...	@@ -679,4 +679,4 @@
679	679	1 – set the signal;
680	680
681	681	2-65535 – use the physical input "Fuse 3".
682		-)))|(% style="width:96px" %)U16
	656	+)))|(% style="width:146px" %)U16