Changes for page 5.2 Modbus protocol

Summary

• Page properties (3 modified, 0 added, 0 removed)

Details

Page properties

Title

...	...	@@ -1,1 +1,1 @@
1		-5.2 Modbus protocol
	1	+5. Modbus protocol

Parent

...	...	@@ -1,1 +1,1 @@
1		-Battery management systems.BMS Main 2\.1.5\. Communication protocols.WebHome
	1	+drafts.bms-main-2.WebHome

Content

...	...	@@ -1,11 +1,5 @@
1		-(% data-numbered-headings-start="5" style="--numbered-headings-start: 4;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
2		-= Communication protocols =
	1	+== 5.1 General information ==
3	3
4		-(% data-numbered-headings-start="2" style="--numbered-headings-start: 1;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
5		-== Modbus protocol ==
6		-
7		-=== General information ===
8		-
9	9	The BMS Main 2.x device provides the information about the battery system using Modbus protocol. The BMS is a Modbus-server and it responds to the Modbus-client’s commands.
10	10
11	11	Interaction with the device is performed over the RS-485 bus (Modbus RTU) or the Ethernet network (Modbus TCP).
...	...	@@ -34,18 +34,17 @@
34	34
35	35	Words are in the **little endian**.
36	36
37		-=== Input registers ===
	31	+== 5.2 Input registers ==
38	38
39		-(% style="width:651px" %)
40		-|(% style="width:92px" %)**Register address**|(% style="width:94px" %)**Number of registers**|(% style="width:368px" %)**Content**|(% style="width:96px" %)**Type**
41		-|(% style="width:92px" %)**0x0000**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	33	+|**Register address**|(% style="width:166px" %)**Number of registers**|(% style="width:999px" %)**Content**|(% style="width:145px" %)**Type**
	34	+|**0x0000**|(% style="width:166px" %)1|(% style="width:999px" %)(((
42	42	Hardware version:
43	43
44	44	byte 0 — minor;
45	45
46	46	byte 1 — major.
47		-)))|(% style="width:96px" %)U8[2]
48		-|(% style="width:92px" %)**0x0001-0x0002**|(% style="width:94px" %)2|(% style="width:368px" %)(((
	40	+)))|(% style="width:145px" %)U8[2]
	41	+|**0x0001-0x0002**|(% style="width:166px" %)2|(% style="width:999px" %)(((
49	49	Firmware version:
50	50
51	51	byte 0 — patch;
...	...	@@ -55,8 +55,8 @@
55	55	byte 2 — major;
56	56
57	57	byte 3 — not used (set to 0).
58		-)))|(% style="width:96px" %)U8[4]
59		-|(% style="width:92px" %)**0x0003-0x0004**|(% style="width:94px" %)2|(% style="width:368px" %)(((
	51	+)))|(% style="width:145px" %)U8[4]
	52	+|**0x0003-0x0004**|(% style="width:166px" %)2|(% style="width:999px" %)(((
60	60	Bootloader version:
61	61
62	62	byte 0 — patch;
...	...	@@ -66,8 +66,8 @@
66	66	byte 2 — major;
67	67
68	68	byte 3 — not used (set to 0).
69		-)))|(% style="width:96px" %)U8[4]
70		-|(% style="width:92px" %)**0x1000-0x1003**|(% style="width:94px" %)3|(% style="width:368px" %)(((
	62	+)))|(% style="width:145px" %)U8[4]
	63	+|**0x1000-0x1003**|(% style="width:166px" %)3|(% style="width:999px" %)(((
71	71	Current time on the device clock:
72	72
73	73	byte 0 — day (BCD);
...	...	@@ -81,8 +81,8 @@
81	81	byte 4 — minutes (BCD);
82	82
83	83	byte 5 — seconds (BCD).
84		-)))|(% style="width:96px" %)U8[6]
85		-|(% style="width:92px" %)**0x2000**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	77	+)))|(% style="width:145px" %)U8[6]
	78	+|**0x2000**|(% style="width:166px" %)1|(% style="width:999px" %)(((
86	86	Discrete input signals 1 (bitfield):
87	87
88	88	bit 0 — "Battery cover";
...	...	@@ -116,11 +116,11 @@
116	116	bit 14 – “Interlock”;
117	117
118	118	bit 15 – “Fuse 1”.
119		-)))|(% style="width:96px" %)U16
120		-|(% style="width:92px" %)**0x2001-0x2002**|(% style="width:94px" %)2|(% style="width:368px" %)Current measured by the primary sensor, А|(% style="width:96px" %)REAL32
121		-|(% style="width:92px" %)**0x2003-0x2004**|(% style="width:94px" %)2|(% style="width:368px" %)External temperature, °C|(% style="width:96px" %)REAL32
122		-|(% style="width:92px" %)**0x2005-0x2006**|(% style="width:94px" %)2|(% style="width:368px" %)Humidity, RH%|(% style="width:96px" %)REAL32
123		-|(% style="width:92px" %)**0x2007-0x2008**|(% style="width:94px" %)2|(% style="width:368px" %)(((
	112	+)))|(% style="width:145px" %)U16
	113	+|**0x2001-0x2002**|(% style="width:166px" %)2|(% style="width:999px" %)Current measured by the primary sensor, А|(% style="width:145px" %)REAL32
	114	+|**0x2003-0x2004**|(% style="width:166px" %)2|(% style="width:999px" %)External temperature, °C|(% style="width:145px" %)REAL32
	115	+|**0x2005-0x2006**|(% style="width:166px" %)2|(% style="width:999px" %)Humidity, RH%|(% style="width:145px" %)REAL32
	116	+|**0x2007-0x2008**|(% style="width:166px" %)2|(% style="width:999px" %)(((
124	124	Errors 1 (bitfield):
125	125
126	126	bit 0 – “Overcurrent”;
...	...	@@ -184,8 +184,8 @@
184	184	bit 29 – “Spirit offline”, connection with the Spirit truck is lost;
185	185
186	186	bits 30–31 – reserved.
187		-)))|(% style="width:96px" %)U32
188		-|(% style="width:92px" %)**0x2009-0x200A**|(% style="width:94px" %)2|(% style="width:368px" %)(((
	180	+)))|(% style="width:145px" %)U32
	181	+|**0x2009-0x200A**|(% style="width:166px" %)2|(% style="width:999px" %)(((
189	189	Internal signals (bitfield):
190	190
191	191	bit 0 — "Low SOC";
...	...	@@ -240,13 +240,9 @@
240	240
241	241	bit 25 – “Power up”;
242	242
243		-bit 26 — signal “External 1”;
244		-
245		-bit 27 — signal “Heater (AUX)”;
246		-
247		-bits 28-31 — not used.
248		-)))|(% style="width:96px" %)U32
249		-|(% style="width:92px" %)**0x200B**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	236	+bits 26-31 – reserved.
	237	+)))|(% style="width:145px" %)U32
	238	+|**0x200B**|(% style="width:166px" %)1|(% style="width:999px" %)(((
250	250	Discrete output signals (bitfield):
251	251
252	252	bit 0 — state of the output #1;
...	...	@@ -258,8 +258,8 @@
258	258	bit 3 — state of the output #4;
259	259
260	260	bits 4-15 — not used.
261		-)))|(% style="width:96px" %)U16
262		-|(% style="width:92px" %)**0x200C**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	250	+)))|(% style="width:145px" %)U16
	251	+|**0x200C**|(% style="width:166px" %)1|(% style="width:999px" %)(((
263	263	Relay states (bitfield):
264	264
265	265	bit 0 — state of the relay #1;
...	...	@@ -271,8 +271,8 @@
271	271	bit 3 — state of the relay #4;
272	272
273	273	bits 4-15 — not used.
274		-)))|(% style="width:96px" %)U16
275		-|(% style="width:92px" %)**0x200E-0x200F**|(% style="width:94px" %)2|(% style="width:368px" %)(((
	263	+)))|(% style="width:145px" %)U16
	264	+|**0x200E**|(% style="width:166px" %)2|(% style="width:999px" %)(((
276	276	Errors 2 (bitfield):
277	277
278	278	bit 0 – "Low CH temperature", temperature is too low for charging;
...	...	@@ -303,14 +303,10 @@
303	303
304	304	bit 13 – “General error”;
305	305
306		-bit 14-16 — reserved (set to 0);
307		-
308		-bit 17 — “Precharge error”;
309		-
310		-bits 18-31 — not used.
311		-)))|(% style="width:96px" %)U32
312		-|(% style="width:92px" %)**0x2010**|(% style="width:94px" %)1|(% style="width:368px" %)Address or the BMS Logic device whose parameters are in registers 0x2011-0x20C9|(% style="width:96px" %)U16
313		-|(% style="width:92px" %)**0x2011**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	295	+bits 14-31 — reserved.
	296	+)))|(% style="width:145px" %)U32
	297	+|**0x2010**|(% style="width:166px" %)1|(% style="width:999px" %)Address or the BMS Logic device whose parameters are in registers 0x2011-0x20C9|(% style="width:145px" %)U16
	298	+|**0x2011**|(% style="width:166px" %)1|(% style="width:999px" %)(((
314	314	State of the BMS Logic (bitfield):
315	315
316	316	bit 0 — device is present;
...	...	@@ -330,14 +330,14 @@
330	330	bit 7 — temperature sensor #2 is shorted;
331	331
332	332	bits 8-15 — reserved.
333		-)))|(% style="width:96px" %)U16
334		-|(% style="width:92px" %)**0x2012-0x2013**|(% style="width:94px" %)2|(% style="width:368px" %)Temperature of the BMS Logic, °C|(% style="width:96px" %)REAL32
335		-|(% style="width:92px" %)**0x2014-0x2015**|(% style="width:94px" %)2|(% style="width:368px" %)(((
	318	+)))|(% style="width:145px" %)U16
	319	+|**0x2012-0x2013**|(% style="width:166px" %)2|(% style="width:999px" %)Temperature of the BMS Logic, °C|(% style="width:145px" %)REAL32
	320	+|**0x2014-0x2015**|(% style="width:166px" %)2|(% style="width:999px" %)(((
336	336	Cell balancing flags (bitfield):
337	337
338	338	bit i — balancing resistor is connected to the i^^th^^ cell.
339		-)))|(% style="width:96px" %)U32
340		-|(% style="width:92px" %)**0x2016-0x2029**|(% style="width:94px" %)20|(% style="width:368px" %)(((
	324	+)))|(% style="width:145px" %)U32
	325	+|**0x2016-0x2029**|(% style="width:166px" %)20|(% style="width:999px" %)(((
341	341	Array of cells states. Each element of the array corresponds to a cell and is a bitfield:
342	342
343	343	bit 0 — cell is present;
...	...	@@ -353,99 +353,93 @@
353	353	bit 5 — wires are connected to the cell;
354	354
355	355	bits 6-15 — reserved.
356		-)))|(% style="width:96px" %)U16[20]
357		-|(% style="width:92px" %)**0x202A-0x2051**|(% style="width:94px" %)40|(% style="width:368px" %)Array of cells voltages (V)|(% style="width:96px" %)REAL32[20]
358		-|(% style="width:92px" %)**0x2052-0x2079**|(% style="width:94px" %)40|(% style="width:368px" %)Array of cells temperatures (°C)|(% style="width:96px" %)REAL32[20]
359		-|(% style="width:92px" %)**0x207A-0x20A1**|(% style="width:94px" %)40|(% style="width:368px" %)Array of cells SOCs ~(%)|(% style="width:96px" %)REAL32[20]
360		-|(% style="width:92px" %)**0x20A2-0x20C9**|(% style="width:94px" %)40|(% style="width:368px" %)Array of cells resistances (Ohm)|(% style="width:96px" %)REAL32[20]
361		-|(% style="width:92px" %)**0x20F4**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	341	+)))|(% style="width:145px" %)U16[20]
	342	+|**0x202A-0x2051**|(% style="width:166px" %)40|(% style="width:999px" %)Array of cells voltages (V)|(% style="width:145px" %)REAL32[20]
	343	+|**0x2052-0x2079**|(% style="width:166px" %)40|(% style="width:999px" %)Array of cells temperatures (°C)|(% style="width:145px" %)REAL32[20]
	344	+|**0x207A-0x20A1**|(% style="width:166px" %)40|(% style="width:999px" %)Array of cells SOCs ~(%)|(% style="width:145px" %)REAL32[20]
	345	+|**0x20A2-0x20C9**|(% style="width:166px" %)40|(% style="width:999px" %)Array of cells resistances (Ohm)|(% style="width:145px" %)REAL32[20]
	346	+|**0x20F4**|(% style="width:166px" %)1|(% style="width:999px" %)(((
362	362	Discrete input signals 2 (bitfield):
363	363
364		-bit 0 — “Fuse 2”;
	349	+bit 0 – “Fuse 2”;
365	365
366		-bit 1 — “Fuse 3”;
	351	+bit 1 – “Fuse 3”;
367	367
368		-bit 2 — “Circuit breaker status”;
	353	+bit 2 – “Circuit breaker status”;
369	369
370		-bit 3 — signal "Balancing request";
371		-
372		-bit 4 — signal "Close Main contactor";
373		-
374		-bit 5 — signal "Close External 1";
375		-
376		-bits 6-15 — not used.
377		-)))|(% style="width:96px" %)U16
378		-|(% style="width:92px" %)**0x2100-0x2101**|(% style="width:94px" %)2|(% style="width:368px" %)Battery state of charge (SOC), %|(% style="width:96px" %)REAL32
379		-|(% style="width:92px" %)**0x2102**|(% style="width:94px" %)1|(% style="width:368px" %)Number of BMS Logic devices|(% style="width:96px" %)U16
380		-|(% style="width:92px" %)**0x2103**|(% style="width:94px" %)1|(% style="width:368px" %)Number of cells|(% style="width:96px" %)U16
381		-|(% style="width:92px" %)**0x2104-0x2105**|(% style="width:94px" %)2|(% style="width:368px" %)Battery voltage, V|(% style="width:96px" %)REAL32
382		-|(% style="width:92px" %)**0x2106-0x2107**|(% style="width:94px" %)2|(% style="width:368px" %)Battery resistance, Ohm|(% style="width:96px" %)REAL32
383		-|(% style="width:92px" %)**0x2108-0x2109**|(% style="width:94px" %)2|(% style="width:368px" %)Effective capacity, A×h|(% style="width:96px" %)REAL32
384		-|(% style="width:92px" %)**0x210A-0x210B**|(% style="width:94px" %)2|(% style="width:368px" %)Balancing effectivity, %|(% style="width:96px" %)REAL32
385		-|(% style="width:92px" %)**0x210C-0x210D**|(% style="width:94px" %)2|(% style="width:368px" %)State of health, %|(% style="width:96px" %)REAL32
386		-|(% style="width:92px" %)**0x210E-0x210F**|(% style="width:94px" %)2|(% style="width:368px" %)Depth of discharge, A×h|(% style="width:96px" %)REAL32
387		-|(% style="width:92px" %)**0x2110-0x2111**|(% style="width:94px" %)2|(% style="width:368px" %)Minimum BMS Logic temperature|(% style="width:96px" %)REAL32
388		-|(% style="width:92px" %)**0x2112**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device whose temperature is minimal|(% style="width:96px" %)U16
389		-|(% style="width:92px" %)**0x2113-0x2114**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum BMS Logic temperature|(% style="width:96px" %)REAL32
390		-|(% style="width:92px" %)**0x2115**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device whose temperature is maximal|(% style="width:96px" %)U16
391		-|(% style="width:92px" %)**0x2116-0x2117**|(% style="width:94px" %)2|(% style="width:368px" %)BMS Logic polling rate, commands pre second|(% style="width:96px" %)REAL32
392		-|(% style="width:92px" %)**0x2118-0x2119**|(% style="width:94px" %)2|(% style="width:368px" %)Minimum cell temperature|(% style="width:96px" %)REAL32
393		-|(% style="width:92px" %)**0x211A**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device which is connected to the cell whose temperature is minimal|(% style="width:96px" %)U16
394		-|(% style="width:92px" %)**0x211B**|(% style="width:94px" %)1|(% style="width:368px" %)Position of the cell whose temperature is minimal|(% style="width:96px" %)U16
395		-|(% style="width:92px" %)**0x211C-0x211D**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum cell temperature|(% style="width:96px" %)REAL32
396		-|(% style="width:92px" %)**0x211E**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device which is connected to the cell whose temperature is maximal|(% style="width:96px" %)U16
397		-|(% style="width:92px" %)**0x211F**|(% style="width:94px" %)1|(% style="width:368px" %)Position of the cell whose temperature is maximal|(% style="width:96px" %)U16
398		-|(% style="width:92px" %)**0x2120-0x2121**|(% style="width:94px" %)2|(% style="width:368px" %)Minimum cell voltage|(% style="width:96px" %)REAL32
399		-|(% style="width:92px" %)**0x2122**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device which is connected to the cell whose voltage is minimal|(% style="width:96px" %)U16
400		-|(% style="width:92px" %)**0x2123**|(% style="width:94px" %)1|(% style="width:368px" %)Position of the cell whose voltage is minimal|(% style="width:96px" %)U16
401		-|(% style="width:92px" %)**0x2124-0x2125**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum cell voltage|(% style="width:96px" %)REAL32
402		-|(% style="width:92px" %)**0x2126**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device which is connected to the cell whose voltage is maximal|(% style="width:96px" %)U16
403		-|(% style="width:92px" %)**0x2127**|(% style="width:94px" %)1|(% style="width:368px" %)Position of the cell whose voltage is maximal|(% style="width:96px" %)U16
404		-|(% style="width:92px" %)**0x2128**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	355	+bits 3-15 – reserved.
	356	+)))|(% style="width:145px" %)U16
	357	+|**0x2100-0x2101**|(% style="width:166px" %)2|(% style="width:999px" %)Battery state of charge (SOC), %|(% style="width:145px" %)REAL32
	358	+|**0x2102**|(% style="width:166px" %)1|(% style="width:999px" %)Number of BMS Logic devices|(% style="width:145px" %)U16
	359	+|**0x2103**|(% style="width:166px" %)1|(% style="width:999px" %)Number of cells|(% style="width:145px" %)U16
	360	+|**0x2104-0x2105**|(% style="width:166px" %)2|(% style="width:999px" %)Battery voltage, V|(% style="width:145px" %)REAL32
	361	+|**0x2106-0x2107**|(% style="width:166px" %)2|(% style="width:999px" %)Battery resistance, Ohm|(% style="width:145px" %)REAL32
	362	+|**0x2108-0x2109**|(% style="width:166px" %)2|(% style="width:999px" %)Effective capacity, A×h|(% style="width:145px" %)REAL32
	363	+|**0x210A-0x210B**|(% style="width:166px" %)2|(% style="width:999px" %)Balancing effectivity, %|(% style="width:145px" %)REAL32
	364	+|**0x210C-0x210D**|(% style="width:166px" %)2|(% style="width:999px" %)State of health, %|(% style="width:145px" %)REAL32
	365	+|**0x210E-0x210F**|(% style="width:166px" %)2|(% style="width:999px" %)Depth of discharge, A×h|(% style="width:145px" %)REAL32
	366	+|**0x2110-0x2111**|(% style="width:166px" %)2|(% style="width:999px" %)Minimum BMS Logic temperature|(% style="width:145px" %)REAL32
	367	+|**0x2112**|(% style="width:166px" %)1|(% style="width:999px" %)Address of the BMS Logic device whose temperature is minimal|(% style="width:145px" %)U16
	368	+|**0x2113-0x2114**|(% style="width:166px" %)2|(% style="width:999px" %)Maximum BMS Logic temperature|(% style="width:145px" %)REAL32
	369	+|**0x2115**|(% style="width:166px" %)1|(% style="width:999px" %)Address of the BMS Logic device whose temperature is maximal|(% style="width:145px" %)U16
	370	+|**0x2116-0x2117**|(% style="width:166px" %)2|(% style="width:999px" %)BMS Logic polling rate, commands pre second|(% style="width:145px" %)REAL32
	371	+|**0x2118-0x2119**|(% style="width:166px" %)2|(% style="width:999px" %)Minimum cell temperature|(% style="width:145px" %)REAL32
	372	+|**0x211A**|(% style="width:166px" %)1|(% style="width:999px" %)Address of the BMS Logic device which is connected to the cell whose temperature is minimal|(% style="width:145px" %)U16
	373	+|**0x211B**|(% style="width:166px" %)1|(% style="width:999px" %)Position of the cell whose temperature is minimal|(% style="width:145px" %)U16
	374	+|**0x211C-0x211D**|(% style="width:166px" %)2|(% style="width:999px" %)Maximum cell temperature|(% style="width:145px" %)REAL32
	375	+|**0x211E**|(% style="width:166px" %)1|(% style="width:999px" %)Address of the BMS Logic device which is connected to the cell whose temperature is maximal|(% style="width:145px" %)U16
	376	+|**0x211F**|(% style="width:166px" %)1|(% style="width:999px" %)Position of the cell whose temperature is maximal|(% style="width:145px" %)U16
	377	+|**0x2120-0x2121**|(% style="width:166px" %)2|(% style="width:999px" %)Minimum cell voltage|(% style="width:145px" %)REAL32
	378	+|**0x2122**|(% style="width:166px" %)1|(% style="width:999px" %)Address of the BMS Logic device which is connected to the cell whose voltage is minimal|(% style="width:145px" %)U16
	379	+|**0x2123**|(% style="width:166px" %)1|(% style="width:999px" %)Position of the cell whose voltage is minimal|(% style="width:145px" %)U16
	380	+|**0x2124-0x2125**|(% style="width:166px" %)2|(% style="width:999px" %)Maximum cell voltage|(% style="width:145px" %)REAL32
	381	+|**0x2126**|(% style="width:166px" %)1|(% style="width:999px" %)Address of the BMS Logic device which is connected to the cell whose voltage is maximal|(% style="width:145px" %)U16
	382	+|**0x2127**|(% style="width:166px" %)1|(% style="width:999px" %)Position of the cell whose voltage is maximal|(% style="width:145px" %)U16
	383	+|**0x2128**|(% style="width:166px" %)1|(% style="width:999px" %)(((
405	405	Error flag:
406	406
407	407	0 — no errors;
408	408
409	409	1 — there are some errors.
410		-)))|(% style="width:96px" %)U16
411		-|(% style="width:92px" %)**0x2130-0x2131**|(% style="width:94px" %)2|(% style="width:368px" %)Energy received from the charger, W×h|(% style="width:96px" %)REAL32
412		-|(% style="width:92px" %)**0x2132-0x2133**|(% style="width:94px" %)2|(% style="width:368px" %)Energy consumed by the load, W×h|(% style="width:96px" %)REAL32
413		-|(% style="width:92px" %)**0x2134-0x2135**|(% style="width:94px" %)2|(% style="width:368px" %)Energy dissipated by the balancing resistors, W×h|(% style="width:96px" %)REAL32
414		-|(% style="width:92px" %)**0x2140**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	389	+)))|(% style="width:145px" %)U16
	390	+|**0x2130-0x2131**|(% style="width:166px" %)2|(% style="width:999px" %)Energy received from the charger, W×h|(% style="width:145px" %)REAL32
	391	+|**0x2132-0x2133**|(% style="width:166px" %)2|(% style="width:999px" %)Energy consumed by the load, W×h|(% style="width:145px" %)REAL32
	392	+|**0x2134-0x2135**|(% style="width:166px" %)2|(% style="width:999px" %)Energy dissipated by the balancing resistors, W×h|(% style="width:145px" %)REAL32
	393	+|**0x2140**|(% style="width:166px" %)1|(% style="width:999px" %)(((
415	415	SD-card mounting flag:
416	416
417	417	0 — not mounted;
418	418
419	419	1 — mounted.
420		-)))|(% style="width:96px" %)U16
421		-|(% style="width:92px" %)**0x2141**|(% style="width:94px" %)1|(% style="width:368px" %)Reserved|(% style="width:96px" %)U16
422		-|(% style="width:92px" %)**0x2142**|(% style="width:94px" %)1|(% style="width:368px" %)Reserved|(% style="width:96px" %)U16
423		-|(% style="width:92px" %)**0x2170**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	399	+)))|(% style="width:145px" %)U16
	400	+|**0x2141**|(% style="width:166px" %)1|(% style="width:999px" %)Reserved|(% style="width:145px" %)U16
	401	+|**0x2142**|(% style="width:166px" %)1|(% style="width:999px" %)Reserved|(% style="width:145px" %)U16
	402	+|**0x2170**|(% style="width:166px" %)1|(% style="width:999px" %)(((
424	424	Wi-Fi connection status:
425	425
426	426	0 — no connection;
427	427
428	428	1 — connection is established.
429		-)))|(% style="width:96px" %)U16
430		-|(% style="width:92px" %)**0x2171-0x2172**|(% style="width:94px" %)2|(% style="width:368px" %)IP-address in the Wi-Fi network|(% style="width:96px" %)U8[4]
431		-|(% style="width:92px" %)**0x2173-0x2175**|(% style="width:94px" %)3|(% style="width:368px" %)MAC-address of the Wi-Fi module|(% style="width:96px" %)U8[6]
432		-|(% style="width:92px" %)**0x2179-0x217A**|(% style="width:94px" %)2|(% style="width:368px" %)Instant effective capacity, A×h|(% style="width:96px" %)REAL32
433		-|(% style="width:92px" %)**0x217B-0x217C**|(% style="width:94px" %)2|(% style="width:368px" %)Coulomb received from the charger, A×h|(% style="width:96px" %)REAL32
434		-|(% style="width:92px" %)**0x217D-0x217E**|(% style="width:94px" %)2|(% style="width:368px" %)Coulomb consumed by the load, A×h|(% style="width:96px" %)REAL32
435		-|(% style="width:92px" %)**0x217F-0x2180**|(% style="width:94px" %)2|(% style="width:368px" %)Ethernet IP-address|(% style="width:96px" %)U8[4]
436		-|(% style="width:92px" %)**0x2181-0x2182**|(% style="width:94px" %)2|(% style="width:368px" %)Ethernet netmask|(% style="width:96px" %)U8[4]
437		-|(% style="width:92px" %)**0x2183-0x2184**|(% style="width:94px" %)2|(% style="width:368px" %)Ethernet gateway|(% style="width:96px" %)U8[4]
438		-|(% style="width:92px" %)**0x2185-0x2186**|(% style="width:94px" %)2|(% style="width:368px" %)Calibrated voltage in the reference line of the current sensor, V|(% style="width:96px" %)REAL32
439		-|(% style="width:92px" %)**0x218E**|(% style="width:94px" %)2|(% style="width:368px" %)Voltage from the current sensor, V|(% style="width:96px" %)REAL32
440		-|(% style="width:92px" %)**0x2190**|(% style="width:94px" %)2|(% style="width:368px" %)Voltage in the reference line of the current sensor, V|(% style="width:96px" %)REAL32
441		-|(% style="width:92px" %)**0x2192**|(% style="width:94px" %)2|(% style="width:368px" %)Voltage from the auxiliary current sensor, V|(% style="width:96px" %)REAL32
442		-|(% style="width:92px" %)**0x2194**|(% style="width:94px" %)2|(% style="width:368px" %)Voltage in the reference line of the auxiliary current sensor, V|(% style="width:96px" %)REAL32
443		-|(% style="width:92px" %)**0x219F**|(% style="width:94px" %)2|(% style="width:368px" %)Charge current limit, A|(% style="width:96px" %)REAL32
444		-|(% style="width:92px" %)**0x21A1**|(% style="width:94px" %)2|(% style="width:368px" %)Discharge current limit, A|(% style="width:96px" %)REAL32
445		-|(% style="width:92px" %)**0x21B8**|(% style="width:94px" %)1|(% style="width:368px" %)Flag indicating that the cells are balancing|(% style="width:96px" %)U16
446		-|(% style="width:92px" %)**0x21C6**|(% style="width:94px" %)2|(% style="width:368px" %)Calibrated voltage in the reference line of the auxiliary current sensor, V|(% style="width:96px" %)REAL32
447		-|(% style="width:92px" %)**0x21CA**|(% style="width:94px" %)2|(% style="width:368px" %)Average cell voltage, V|(% style="width:96px" %)REAL32
448		-|(% style="width:92px" %)**0x2200-0x2203**|(% style="width:94px" %)4|(% style="width:368px" %)(((
	408	+)))|(% style="width:145px" %)U16
	409	+|**0x2171-0x2172**|(% style="width:166px" %)2|(% style="width:999px" %)IP-address in the Wi-Fi network|(% style="width:145px" %)U8[4]
	410	+|**0x2173-0x2175**|(% style="width:166px" %)3|(% style="width:999px" %)MAC-address of the Wi-Fi module|(% style="width:145px" %)U8[6]
	411	+|**0x2179-0x217A**|(% style="width:166px" %)2|(% style="width:999px" %)Instant effective capacity, A×h|(% style="width:145px" %)REAL32
	412	+|**0x217B-0x217C**|(% style="width:166px" %)2|(% style="width:999px" %)Coulomb received from the charger, A×h|(% style="width:145px" %)REAL32
	413	+|**0x217D-0x217E**|(% style="width:166px" %)2|(% style="width:999px" %)Coulomb consumed by the load, A×h|(% style="width:145px" %)REAL32
	414	+|**0x217F-0x2180**|(% style="width:166px" %)2|(% style="width:999px" %)Ethernet IP-address|(% style="width:145px" %)U8[4]
	415	+|**0x2181-0x2182**|(% style="width:166px" %)2|(% style="width:999px" %)Ethernet netmask|(% style="width:145px" %)U8[4]
	416	+|**0x2183-0x2184**|(% style="width:166px" %)2|(% style="width:999px" %)Ethernet gateway|(% style="width:145px" %)U8[4]
	417	+|**0x2185-0x2186**|(% style="width:166px" %)2|(% style="width:999px" %)Calibrated voltage in the reference line of the current sensor, V|(% style="width:145px" %)REAL32
	418	+|**0x218E**|(% style="width:166px" %)2|(% style="width:999px" %)Voltage from the current sensor, V|(% style="width:145px" %)REAL32
	419	+|**0x2190**|(% style="width:166px" %)2|(% style="width:999px" %)Voltage in the reference line of the current sensor, V|(% style="width:145px" %)REAL32
	420	+|**0x2192**|(% style="width:166px" %)2|(% style="width:999px" %)Voltage from the auxiliary current sensor, V|(% style="width:145px" %)REAL32
	421	+|**0x2194**|(% style="width:166px" %)2|(% style="width:999px" %)Voltage in the reference line of the auxiliary current sensor, V|(% style="width:145px" %)REAL32
	422	+|**0x219F**|(% style="width:166px" %)2|(% style="width:999px" %)Charge current limit, A|(% style="width:145px" %)REAL32
	423	+|**0x21A1**|(% style="width:166px" %)2|(% style="width:999px" %)Discharge current limit, A|(% style="width:145px" %)REAL32
	424	+|**0x21B8**|(% style="width:166px" %)1|(% style="width:999px" %)Flag indicating that the cells are balancing|(% style="width:145px" %)U16
	425	+|**0x21C6**|(% style="width:166px" %)2|(% style="width:999px" %)Calibrated voltage in the reference line of the auxiliary current sensor, V|(% style="width:145px" %)REAL32
	426	+|**0x21CA**|(% style="width:166px" %)2|(% style="width:999px" %)Average cell voltage, V|(% style="width:145px" %)REAL32
	427	+|**0x2200-0x2203**|(% style="width:166px" %)4|(% style="width:999px" %)(((
449	449	Record #1 from the errors journal. First 32-bit word contains a timestamp, second 32-bit word contains errors 1 flags (see 0x2007-0x2008).
450	450
451	451	Timestamp format:
...	...	@@ -461,22 +461,22 @@
461	461	bits 20-25 — minutes;
462	462
463	463	bits 26-31 — seconds.
464		-)))|(% style="width:96px" %)U32[2]
465		-|(% style="width:92px" %)**0x2204-0x2207**|(% style="width:94px" %)4|(% style="width:368px" %)Record #2 from the errors journal|(% style="width:96px" %)U32[2]
466		-|(% style="width:92px" %)**0x2208-0x227B**|(% style="width:94px" %) |(% style="width:368px" %)Records #3-31 from the errors journal|(% style="width:96px" %)
467		-|(% style="width:92px" %)**0x227C-0x227F**|(% style="width:94px" %)4|(% style="width:368px" %)Record #32 from the errors journal|(% style="width:96px" %)U32[2]
468		-|(% style="width:92px" %)**0x2300**|(% style="width:94px" %)1|(% style="width:368px" %)Number of the last record from the errors journal (1..32)|(% style="width:96px" %)U16
469		-|(% style="width:92px" %)**0x2380**|(% style="width:94px" %)4|(% style="width:368px" %)Record data #1 from the errors journal. First 32-bit word contains errors 2 flags (see 0x200E-0x200F).|(% style="width:96px" %)U32[2]
470		-|(% style="width:92px" %)**0x2384-0x2387**|(% style="width:94px" %)4|(% style="width:368px" %)Record data #2 from the errors journal|(% style="width:96px" %)U32[2]
471		-|(% style="width:92px" %)**0x2388-0x23FB**|(% style="width:94px" %) |(% style="width:368px" %)Records data #3-31 from the errors journal|(% style="width:96px" %)
472		-|(% style="width:92px" %)**0x23FC-0x23FF**|(% style="width:94px" %)4|(% style="width:368px" %)Record data #32 from the errors journal|(% style="width:96px" %)U32[2]
473		-|(% style="width:92px" %)**0x2400**|(% style="width:94px" %)2|(% style="width:368px" %)Current measured by the auxiliary current sensor, A|(% style="width:96px" %)REAL32
474		-|(% style="width:92px" %)**0x2402**|(% style="width:94px" %)2|(% style="width:368px" %)(((
	443	+)))|(% style="width:145px" %)U32[2]
	444	+|**0x2204-0x2207**|(% style="width:166px" %)4|(% style="width:999px" %)Record #2 from the errors journal|(% style="width:145px" %)U32[2]
	445	+|**0x2208-0x227B**|(% style="width:166px" %) |(% style="width:999px" %)Records #3-31 from the errors journal|(% style="width:145px" %)
	446	+|**0x227C-0x227F**|(% style="width:166px" %)4|(% style="width:999px" %)Record #32 from the errors journal|(% style="width:145px" %)U32[2]
	447	+|**0x2300**|(% style="width:166px" %)1|(% style="width:999px" %)Number of the last record from the errors journal (1..32)|(% style="width:145px" %)U16
	448	+|**0x2380**|(% style="width:166px" %)4|(% style="width:999px" %)Record data #1 from the errors journal. First 32-bit word contains errors 2 flags (see 0x200E-0x200F).|(% style="width:145px" %)U32[2]
	449	+|**0x2384-0x2387**|(% style="width:166px" %)4|(% style="width:999px" %)Record data #2 from the errors journal|(% style="width:145px" %)U32[2]
	450	+|**0x2388-0x23FB**|(% style="width:166px" %) |(% style="width:999px" %)Records data #3-31 from the errors journal|(% style="width:145px" %)
	451	+|**0x23FC-0x23FF**|(% style="width:166px" %)4|(% style="width:999px" %)Record data #32 from the errors journal|(% style="width:145px" %)U32[2]
	452	+|**0x2400**|(% style="width:166px" %)2|(% style="width:999px" %)Current measured by the auxiliary current sensor, A|(% style="width:145px" %)REAL32
	453	+|**0x2402**|(% style="width:166px" %)2|(% style="width:999px" %)(((
475	475	Final battery current, A
476	476
477	477	Note — Typically it is the sum of the values measured by the main and auxiliary current sensors
478		-)))|(% style="width:96px" %)REAL32
479		-|(% style="width:92px" %)**0x2410**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	457	+)))|(% style="width:145px" %)REAL32
	458	+|**0x2410**|(% style="width:166px" %)1|(% style="width:999px" %)(((
480	480	Battery state:
481	481
482	482	0 – Unknown;
...	...	@@ -492,20 +492,19 @@
492	492	5 – Discharging OFF;
493	493
494	494	6 – Relaxed (after discharging).
495		-)))|(% style="width:96px" %)U16
496		-|(% style="width:92px" %)**0x2411**|(% style="width:94px" %)2|(% style="width:368px" %)Duration of the battery state (0x2410), seconds|(% style="width:96px" %)U32
497		-|(% style="width:92px" %)**0x2420**|(% style="width:94px" %)2|(% style="width:368px" %)Nominal battery capacity, A×h|(% style="width:96px" %)REAL32
498		-|(% style="width:92px" %)**0x2422**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum charge voltage, V|(% style="width:96px" %)REAL32
499		-|(% style="width:92px" %)**0x2424**|(% style="width:94px" %)2|(% style="width:368px" %)Minimum discharge voltage, V|(% style="width:96px" %)REAL32
500		-|(% style="width:92px" %)**0x2426**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum charge current, A|(% style="width:96px" %)REAL32
501		-|(% style="width:92px" %)**0x2428**|(% style="width:94px" %)2|(% style="width:368px" %)Maximum discharge current, A|(% style="width:96px" %)REAL32
	474	+)))|(% style="width:145px" %)U16
	475	+|**0x2411**|(% style="width:166px" %)2|(% style="width:999px" %)Duration of the battery state (0x2410), seconds|(% style="width:145px" %)U32
	476	+|**0x2420**|(% style="width:166px" %)2|(% style="width:999px" %)Nominal battery capacity, A×h|(% style="width:145px" %)REAL32
	477	+|**0x2422**|(% style="width:166px" %)2|(% style="width:999px" %)Maximum charge voltage, V|(% style="width:145px" %)REAL32
	478	+|**0x2424**|(% style="width:166px" %)2|(% style="width:999px" %)Minimum discharge voltage, V|(% style="width:145px" %)REAL32
	479	+|**0x2426**|(% style="width:166px" %)2|(% style="width:999px" %)Maximum charge current, A|(% style="width:145px" %)REAL32
	480	+|**0x2428**|(% style="width:166px" %)2|(% style="width:999px" %)Maximum discharge current, A|(% style="width:145px" %)REAL32
502	502
503		-=== Holding registers ===
	482	+== 5.3 Holding registers ==
504	504
505		-(% style="width:653px" %)
506		-|(% style="width:92px" %)**Register address**|(% style="width:94px" %)**Number of registers**|(% style="width:368px" %)**Content**|(% style="width:96px" %)**Type**
507		-|(% style="width:92px" %)**0x4000**|(% style="width:94px" %)1|(% style="width:368px" %)Address of the BMS Logic device whose parameters should be in the input registers 0x2011-0x20C9|(% style="width:96px" %)U16
508		-|(% style="width:92px" %)**0x4100**|(% style="width:94px" %)2|(% style="width:368px" %)(((
	484	+|(% style="width:158px" %)**Register address**|(% style="width:155px" %)**Number of registers**|(% style="width:999px" %)**Content**|(% style="width:146px" %)**Type**
	485	+|(% style="width:158px" %)**0x4000**|(% style="width:155px" %)1|(% style="width:999px" %)Address of the BMS Logic device whose parameters should be in the input registers 0x2011-0x20C9|(% style="width:146px" %)U16
	486	+|(% style="width:158px" %)**0x4100**|(% style="width:155px" %)2|(% style="width:999px" %)(((
509	509	Command to acknowledge errors in the errors journal (bitfield). Each //i//^^th^^ bit corresponds to (//i//+1) record.
510	510
511	511	Notes:
...	...	@@ -513,8 +513,8 @@
513	513	1 – After the errors are acknowledged, the register value will be set to 0.
514	514
515	515	2 – To acknowledge all errors, set 0xFFFFFFFF.
516		-)))|(% style="width:96px" %)U32
517		-|(% style="width:92px" %)**0x5100**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	494	+)))|(% style="width:146px" %)U32
	495	+|(% style="width:158px" %)**0x5100**|(% style="width:155px" %)1|(% style="width:999px" %)(((
518	518	Software control of the "Battery cover" signal. Allowable values:
519	519
520	520	0 – clear the signal;
...	...	@@ -522,8 +522,8 @@
522	522	1 – set the signal;
523	523
524	524	2-65535 – use the physical input "Battery cover".
525		-)))|(% style="width:96px" %)U16
526		-|(% style="width:92px" %)**0x5101**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	503	+)))|(% style="width:146px" %)U16
	504	+|(% style="width:158px" %)**0x5101**|(% style="width:155px" %)1|(% style="width:999px" %)(((
527	527	Software control of the "Charger connected" signal. Allowable values:
528	528
529	529	0 – clear the signal;
...	...	@@ -531,8 +531,8 @@
531	531	1 – set the signal;
532	532
533	533	2-65535 – use the physical input "Charger connected".
534		-)))|(% style="width:96px" %)U16
535		-|(% style="width:92px" %)**0x5102**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	512	+)))|(% style="width:146px" %)U16
	513	+|(% style="width:158px" %)**0x5102**|(% style="width:155px" %)1|(% style="width:999px" %)(((
536	536	Software control of the "Power down request" signal. Allowable values:
537	537
538	538	0 – clear the signal;
...	...	@@ -540,8 +540,8 @@
540	540	1 – set the signal;
541	541
542	542	2-65535 – use the physical input "Power down request".
543		-)))|(% style="width:96px" %)U16
544		-|(% style="width:92px" %)**0x5103**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	521	+)))|(% style="width:146px" %)U16
	522	+|(% style="width:158px" %)**0x5103**|(% style="width:155px" %)1|(% style="width:999px" %)(((
545	545	Software control of the "Inhibit charging" signal. Allowable values:
546	546
547	547	0 – clear the signal;
...	...	@@ -549,8 +549,8 @@
549	549	1 – set the signal;
550	550
551	551	2-65535 – use the physical input "Inhibit charging".
552		-)))|(% style="width:96px" %)U16
553		-|(% style="width:92px" %)**0x5104**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	530	+)))|(% style="width:146px" %)U16
	531	+|(% style="width:158px" %)**0x5104**|(% style="width:155px" %)1|(% style="width:999px" %)(((
554	554	Software control of the "Inhibit discharging" signal. Allowable values:
555	555
556	556	0 – clear the signal;
...	...	@@ -558,8 +558,8 @@
558	558	1 – set the signal;
559	559
560	560	2-65535 – use the physical input "Inhibit discharging".
561		-)))|(% style="width:96px" %)U16
562		-|(% style="width:92px" %)**0x5105**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	539	+)))|(% style="width:146px" %)U16
	540	+|(% style="width:158px" %)**0x5105**|(% style="width:155px" %)1|(% style="width:999px" %)(((
563	563	Software control of the "Charging contactor feedback" signal. Allowable values:
564	564
565	565	0 – clear the signal;
...	...	@@ -567,8 +567,8 @@
567	567	1 – set the signal;
568	568
569	569	2-65535 – use the physical input "Charging contactor feedback".
570		-)))|(% style="width:96px" %)U16
571		-|(% style="width:92px" %)**0x5106**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	548	+)))|(% style="width:146px" %)U16
	549	+|(% style="width:158px" %)**0x5106**|(% style="width:155px" %)1|(% style="width:999px" %)(((
572	572	Software control of the "Discharging contactor feedback" signal. Allowable values:
573	573
574	574	0 – clear the signal;
...	...	@@ -576,8 +576,8 @@
576	576	1 – set the signal;
577	577
578	578	2-65535 – use the physical input "Discharging contactor feedback".
579		-)))|(% style="width:96px" %)U16
580		-|(% style="width:92px" %)**0x5107**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	557	+)))|(% style="width:146px" %)U16
	558	+|(% style="width:158px" %)**0x5107**|(% style="width:155px" %)1|(% style="width:999px" %)(((
581	581	Software control of the "Insulation status" signal. Allowable values:
582	582
583	583	0 – clear the signal;
...	...	@@ -585,8 +585,8 @@
585	585	1 – set the signal;
586	586
587	587	2-65535 – use the physical input "Insulation status".
588		-)))|(% style="width:96px" %)U16
589		-|(% style="width:92px" %)**0x5108**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	566	+)))|(% style="width:146px" %)U16
	567	+|(% style="width:158px" %)**0x5108**|(% style="width:155px" %)1|(% style="width:999px" %)(((
590	590	Software control of the "Charge request" signal. Allowable values:
591	591
592	592	0 – clear the signal;
...	...	@@ -594,8 +594,8 @@
594	594	1 – set the signal;
595	595
596	596	2-65535 – use the physical input "Charge request".
597		-)))|(% style="width:96px" %)U16
598		-|(% style="width:92px" %)**0x5109**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	575	+)))|(% style="width:146px" %)U16
	576	+|(% style="width:158px" %)**0x5109**|(% style="width:155px" %)1|(% style="width:999px" %)(((
599	599	Software control of the "Precharge request" signal. Allowable values:
600	600
601	601	0 – clear the signal;
...	...	@@ -603,8 +603,8 @@
603	603	1 – set the signal;
604	604
605	605	2-65535 – use the physical input "Precharge request".
606		-)))|(% style="width:96px" %)U16
607		-|(% style="width:92px" %)**0x510A**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	584	+)))|(% style="width:146px" %)U16
	585	+|(% style="width:158px" %)**0x510A**|(% style="width:155px" %)1|(% style="width:999px" %)(((
608	608	Software control of the "Discharge request" signal. Allowable values:
609	609
610	610	0 – clear the signal;
...	...	@@ -612,8 +612,8 @@
612	612	1 – set the signal;
613	613
614	614	2-65535 – use the physical input "Discharge request".
615		-)))|(% style="width:96px" %)U16
616		-|(% style="width:92px" %)**0x510B**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	593	+)))|(% style="width:146px" %)U16
	594	+|(% style="width:158px" %)**0x510B**|(% style="width:155px" %)1|(% style="width:999px" %)(((
617	617	Software control of the "PCH contactor feedback" signal. Allowable values:
618	618
619	619	0 – clear the signal;
...	...	@@ -621,8 +621,8 @@
621	621	1 – set the signal;
622	622
623	623	2-65535 – use the physical input "PCH contactor feedback".
624		-)))|(% style="width:96px" %)U16
625		-|(% style="width:92px" %)**0x510C**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	602	+)))|(% style="width:146px" %)U16
	603	+|(% style="width:158px" %)**0x510C**|(% style="width:155px" %)1|(% style="width:999px" %)(((
626	626	Software control of the "CH/DCH contactor feedback" signal. Allowable values:
627	627
628	628	0 – clear the signal;
...	...	@@ -630,8 +630,8 @@
630	630	1 – set the signal;
631	631
632	632	2-65535 – use the physical input "CH/DCH contactor feedback".
633		-)))|(% style="width:96px" %)U16
634		-|(% style="width:92px" %)**0x510D**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	611	+)))|(% style="width:146px" %)U16
	612	+|(% style="width:158px" %)**0x510D**|(% style="width:155px" %)1|(% style="width:999px" %)(((
635	635	Software control of the "Main contactor feedback" signal. Allowable values:
636	636
637	637	0 – clear the signal;
...	...	@@ -639,8 +639,8 @@
639	639	1 – set the signal;
640	640
641	641	2-65535 – use the physical input "Main contactor feedback".
642		-)))|(% style="width:96px" %)U16
643		-|(% style="width:92px" %)**0x510E**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	620	+)))|(% style="width:146px" %)U16
	621	+|(% style="width:158px" %)**0x510E**|(% style="width:155px" %)1|(% style="width:999px" %)(((
644	644	Software control of the "Interlock" signal. Allowable values:
645	645
646	646	0 – clear the signal;
...	...	@@ -648,8 +648,8 @@
648	648	1 – set the signal;
649	649
650	650	2-65535 – use the physical input "Interlock".
651		-)))|(% style="width:96px" %)U16
652		-|(% style="width:92px" %)**0x510F**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	629	+)))|(% style="width:146px" %)U16
	630	+|(% style="width:158px" %)**0x510F**|(% style="width:155px" %)1|(% style="width:999px" %)(((
653	653	Software control of the "Fuse 1" signal. Allowable values:
654	654
655	655	0 – clear the signal;
...	...	@@ -657,8 +657,8 @@
657	657	1 – set the signal;
658	658
659	659	2-65535 – use the physical input "Fuse 1".
660		-)))|(% style="width:96px" %)U16
661		-|(% style="width:92px" %)**0x5110**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	638	+)))|(% style="width:146px" %)U16
	639	+|(% style="width:158px" %)**0x5110**|(% style="width:155px" %)1|(% style="width:999px" %)(((
662	662	Software control of the "Fuse 2" signal. Allowable values:
663	663
664	664	0 – clear the signal;
...	...	@@ -666,8 +666,8 @@
666	666	1 – set the signal;
667	667
668	668	2-65535 – use the physical input "Fuse 2".
669		-)))|(% style="width:96px" %)U16
670		-|(% style="width:92px" %)**0x5111**|(% style="width:94px" %)1|(% style="width:368px" %)(((
	647	+)))|(% style="width:146px" %)U16
	648	+|(% style="width:158px" %)**0x5111**|(% style="width:155px" %)1|(% style="width:999px" %)(((
671	671	Software control of the "Fuse 3" signal. Allowable values:
672	672
673	673	0 – clear the signal;
...	...	@@ -675,4 +675,4 @@
675	675	1 – set the signal;
676	676
677	677	2-65535 – use the physical input "Fuse 3".
678		-)))|(% style="width:96px" %)U16
	656	+)))|(% style="width:146px" %)U16