Skip to Content

Changes for page 4. Firmware update

Last modified by Admin on 2025/03/03 13:18
From version 7.1
edited by Admin
on 2024/12/02 05:47
Change comment: There is no comment for this version
To version 8.1
edited by Admin
on 2024/12/02 16:01
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -29,7 +29,7 @@
29 29  
30 30  * **via ElectricDeviceMonitor**: connect to the BMS Main 2.x device using a USB-CAN adapter and the ElectricDeviceMonitor program. Next, in the monitor program, go to the "Service → Commands" section and click on the "Reset device and start loader" button:
31 31  
32 -[[image:1732876996076-348.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="336" width="482"]]
32 +[[image:1732876996076-348.png||data-xwiki-image-style-alignment="center" height="336" width="482"]]
33 33  
34 34  * **via SW1 button**: hold the SW1 button on the device for 1 second. After the indication LEDs go out, release the button. A restart will be performed, and the device will enter bootloader mode.
35 35  
... ... @@ -44,23 +44,23 @@
44 44  
45 45  Launch the ElectricDeviceMonitor’s Updater module:
46 46  
47 -[[image:1732876973941-940.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
47 +[[image:1732876973941-940.png||data-xwiki-image-style-alignment="center"]]
48 48  
49 -[[image:1732876980743-472.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
49 +[[image:1732876980743-472.png||data-xwiki-image-style-alignment="center"]]
50 50  
51 51  From the drop-down menu of the Updater window, select the method of connecting to the BMS Main 2.x device and configure the connection parameters (the "Settings..." button).
52 52  
53 53  * **Ethernet connection**: select the connection method "TCP transport", click the "Settings..." button and, in the window that appears, specify the device's IP address and bootloader port number:
54 54  
55 -[[image:1732877018498-486.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
55 +[[image:1732877018498-486.png||data-xwiki-image-style-alignment="center"]]
56 56  
57 57  * **CAN connection**: select the "CAN transport" connection method, click the "Settings..." button. In the window that appears, select the USB-CAN adapter with which the main firmware will be loaded, and specify the baud rate via the CAN bus:
58 58  
59 -[[image:1732877027638-368.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
59 +[[image:1732877027638-368.png||data-xwiki-image-style-alignment="center"]]
60 60  
61 61  * **RS-485 connection**: select the connection method “Serial port transport”, click the “Settings...” button. In the window that appears, select the COM port through which the PC connects to the device, and specify the baud rate for the COM port:
62 62  
63 -[[image:1732877039628-104.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
63 +[[image:1732877039628-104.png||data-xwiki-image-style-alignment="center"]]
64 64  
65 65  Click the "Browse..." button and select the *.srec file with the main firmware.
66 66