Skip to Content

Changes for page 4. Firmware update

Last modified by Admin on 2025/03/03 13:18
From version 7.1
edited by Admin
on 2024/12/02 05:47
Change comment: There is no comment for this version
To version 11.1
edited by Admin
on 2024/12/04 11:03
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -BMS Main 2.1 firmware update
1 +4. Firmware update
Parent
... ... @@ -1,1 +1,1 @@
1 -drafts.WebHome
1 +drafts.BMS Main 2\.1.WebHome
Content
... ... @@ -1,4 +1,4 @@
1 -== 1. Introduction ==
1 +== 4.1 Introduction ==
2 2  
3 3  This document describes the steps for updating the BMS Main 2.x firmware.
4 4  
... ... @@ -7,7 +7,7 @@
7 7  * using ElectricDeviceMonitor via Ethernet, CAN or RS-485 bus;
8 8  * using the device web interface via Ethernet or Wi-Fi.
9 9  
10 -== 2. Updating via ElectricDeviceMonitor ==
10 +== 4.2 Updating via ElectricDeviceMonitor ==
11 11  
12 12  The following hardware and software are required:
13 13  
... ... @@ -21,7 +21,7 @@
21 21  * starting the bootloader;
22 22  * uploading the firmware file to the BMS Main 2.x flash memory.
23 23  
24 -==== 2.1. Start the device bootloader. ====
24 +==== 4.2.1 Start the device bootloader ====
25 25  
26 26  * **via Web Interface**: go to the "Service → Device" section and click on the link "Reset device and start loader":
27 27  
... ... @@ -40,33 +40,33 @@
40 40  The bootloader will be active for 45 seconds. After this time, control will be transferred again to the main firmware.
41 41  )))
42 42  
43 -==== 2.2. Upload the firmware. ====
43 +==== 4.2.2 Upload the firmware. ====
44 44  
45 -Launch the ElectricDeviceMonitor’s Updater module:
45 +~1. Launch the ElectricDeviceMonitor’s Updater module:
46 46  
47 -[[image:1732876973941-940.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
47 +[[image:1732876973941-940.png||data-xwiki-image-style-alignment="center"]]
48 48  
49 -[[image:1732876980743-472.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
49 +[[image:1732876980743-472.png||data-xwiki-image-style-alignment="center"]]
50 50  
51 -From the drop-down menu of the Updater window, select the method of connecting to the BMS Main 2.x device and configure the connection parameters (the "Settings..." button).
51 +2. From the drop-down menu of the Updater window, select the method of connecting to the BMS Main 2.x device and configure the connection parameters (the "Settings..." button).
52 52  
53 53  * **Ethernet connection**: select the connection method "TCP transport", click the "Settings..." button and, in the window that appears, specify the device's IP address and bootloader port number:
54 54  
55 -[[image:1732877018498-486.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
55 +[[image:1732877018498-486.png||data-xwiki-image-style-alignment="center"]]
56 56  
57 57  * **CAN connection**: select the "CAN transport" connection method, click the "Settings..." button. In the window that appears, select the USB-CAN adapter with which the main firmware will be loaded, and specify the baud rate via the CAN bus:
58 58  
59 -[[image:1732877027638-368.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
59 +[[image:1732877027638-368.png||data-xwiki-image-style-alignment="center"]]
60 60  
61 61  * **RS-485 connection**: select the connection method “Serial port transport”, click the “Settings...” button. In the window that appears, select the COM port through which the PC connects to the device, and specify the baud rate for the COM port:
62 62  
63 -[[image:1732877039628-104.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
63 +[[image:1732877039628-104.png||data-xwiki-image-style-alignment="center"]]
64 64  
65 -Click the "Browse..." button and select the *.srec file with the main firmware.
65 +3. Click the "Browse..." button and select the *.srec file with the main firmware.
66 66  
67 -Click the “Update” button **while the device is in bootloader mode**. The process of loading the new firmware into the device memory will begin.
67 +4. Click the “Update” button **while the device is in bootloader mode**. The process of loading the new firmware into the device memory will begin.
68 68  
69 -== 3. Updating via WEB interface ==
69 +== 4.3 Updating via WEB interface ==
70 70  
71 71  (% class="box warningmessage" %)
72 72  (((