Skip to Content

Changes for page 4. Firmware update

Last modified by Admin on 2025/03/03 13:18
From version 20.1
edited by Admin
on 2025/03/03 13:17
Change comment: There is no comment for this version
To version 18.1
edited by Admin
on 2025/03/03 13:06
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,8 +7,8 @@
7 7  
8 8  Updating the BMS Main 2.x firmware can be done in the following ways:
9 9  
10 -* via ElectricDeviceMonitor by Ethernet, CAN or RS-485 bus;
11 -* via WEB-interface by Ethernet or Wi-Fi.
10 +* using ElectricDeviceMonitor via Ethernet, CAN or RS-485 bus;
11 +* using the device web interface via Ethernet or Wi-Fi.
12 12  
13 13  == Updating via ElectricDeviceMonitor ==
14 14  
... ... @@ -15,12 +15,8 @@
15 15  The following hardware and software are required:
16 16  
17 17  * ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main 2.x.
18 -* Communication interface:
19 -** USB/CAN adapter (for updating by CAN bus);
20 -** USB/RS-485 adapter (for updating by RS-485 bus);
21 -** Ethernet cable (for updating via Ethernet);
22 -** BMS Wi-Fi installed on BMS Main 2.1 board (for updating by Wi-Fi);
23 -* SD-card installed on BMS Main 2.1 for update via web interface;
18 +* USB/CAN adapter (for updating via CAN bus).
19 +* USB/RS-485 adapter (for updating via RS-485 bus).
24 24  * Firmware file in .srec (Motorola S-record) format.
25 25  
26 26  Firmware updating includes two steps: