Skip to Content

Changes for page 4. Firmware update

Last modified by Admin on 2025/03/03 13:18
From version 18.4
edited by Admin
on 2025/03/03 13:15
Change comment: There is no comment for this version
To version 16.1
edited by Admin
on 2025/03/03 12:58
Change comment: Uploaded new attachment "1741006734310-418.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -7,8 +7,8 @@
7 7  
8 8  Updating the BMS Main 2.x firmware can be done in the following ways:
9 9  
10 -* via ElectricDeviceMonitor by Ethernet, CAN or RS-485 bus;
11 -* via web interface by Ethernet or Wi-Fi.
10 +* using ElectricDeviceMonitor via Ethernet, CAN or RS-485 bus;
11 +* using the device web interface via Ethernet or Wi-Fi.
12 12  
13 13  == Updating via ElectricDeviceMonitor ==
14 14  
... ... @@ -15,12 +15,8 @@
15 15  The following hardware and software are required:
16 16  
17 17  * ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main 2.x.
18 -* Communication interface:
19 -** USB/CAN adapter (for updating via CAN bus);
20 -** USB/RS-485 adapter (for updating via RS-485 bus);
21 -** Ethernet cable (for updating via Ethernet);
22 -** BMS Wi-Fi installed
23 -* SD-card installed on BMS Main 2.1 for update via web interface;
18 +* USB/CAN adapter (for updating via CAN bus).
19 +* USB/RS-485 adapter (for updating via RS-485 bus).
24 24  * Firmware file in .srec (Motorola S-record) format.
25 25  
26 26  Firmware updating includes two steps:
... ... @@ -65,9 +65,9 @@
65 65  
66 66  [[image:1732877027638-368.png||data-xwiki-image-style-alignment="center"]]
67 67  
68 -* **RS-485 connection**: select the connection method “Serial port transport”, click the “Settings...” button. In the window that appears, select the COM port through which the PC connects to the device, and specify the baud rate (set up in BMS settings):
64 +* **RS-485 connection**: select the connection method “Serial port transport”, click the “Settings...” button. In the window that appears, select the COM port through which the PC connects to the device, and specify the baud rate for the COM port:
69 69  
70 -[[image:1741006734310-418.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
66 +[[image:1732877039628-104.png||data-xwiki-image-style-alignment="center"]]
71 71  
72 72  3. Click the "Browse..." button and select the *.srec file with the BMS Main 2.1 firmware.
73 73