Skip to Content

Changes for page 4. Firmware update

Last modified by Admin on 2025/03/03 13:18
From version 18.2
edited by Admin
on 2025/03/03 13:14
Change comment: There is no comment for this version
To version 22.1
edited by Admin
on 2025/03/03 13:18
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -8,7 +8,7 @@
8 8  Updating the BMS Main 2.x firmware can be done in the following ways:
9 9  
10 10  * via ElectricDeviceMonitor by Ethernet, CAN or RS-485 bus;
11 -* via web interface by Ethernet or Wi-Fi.
11 +* via WEB interface by Ethernet or Wi-Fi.
12 12  
13 13  == Updating via ElectricDeviceMonitor ==
14 14  
... ... @@ -15,10 +15,12 @@
15 15  The following hardware and software are required:
16 16  
17 17  * ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main 2.x.
18 -*
19 -* USB/CAN adapter (for updating via CAN bus).
20 -* USB/RS-485 adapter (for updating via RS-485 bus).
21 -* SD-card installed on BMS Main 2.1 for update via configuration interface;
18 +* Communication interface:
19 +** USB/CAN adapter (for updating by CAN bus);
20 +** USB/RS-485 adapter (for updating by RS-485 bus);
21 +** Ethernet cable (for updating via Ethernet);
22 +** BMS Wi-Fi installed on BMS Main 2.1 board (for updating by Wi-Fi);
23 +* SD-card installed on BMS Main 2.1 for update via WEB interface;
22 22  * Firmware file in .srec (Motorola S-record) format.
23 23  
24 24  Firmware updating includes two steps: