Skip to Content

Changes for page 4. Firmware update

Last modified by Admin on 2025/03/03 13:18
From version 17.1
edited by Admin
on 2025/03/03 12:59
Change comment: There is no comment for this version
To version 20.1
edited by Admin
on 2025/03/03 13:17
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -7,8 +7,8 @@
7 7  
8 8  Updating the BMS Main 2.x firmware can be done in the following ways:
9 9  
10 -* using ElectricDeviceMonitor via Ethernet, CAN or RS-485 bus;
11 -* using the device web interface via Ethernet or Wi-Fi.
10 +* via ElectricDeviceMonitor by Ethernet, CAN or RS-485 bus;
11 +* via WEB-interface by Ethernet or Wi-Fi.
12 12  
13 13  == Updating via ElectricDeviceMonitor ==
14 14  
... ... @@ -15,8 +15,12 @@
15 15  The following hardware and software are required:
16 16  
17 17  * ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main 2.x.
18 -* USB/CAN adapter (for updating via CAN bus).
19 -* USB/RS-485 adapter (for updating via RS-485 bus).
18 +* Communication interface:
19 +** USB/CAN adapter (for updating by CAN bus);
20 +** USB/RS-485 adapter (for updating by RS-485 bus);
21 +** Ethernet cable (for updating via Ethernet);
22 +** BMS Wi-Fi installed on BMS Main 2.1 board (for updating by Wi-Fi);
23 +* SD-card installed on BMS Main 2.1 for update via web interface;
20 20  * Firmware file in .srec (Motorola S-record) format.
21 21  
22 22  Firmware updating includes two steps:
... ... @@ -61,7 +61,7 @@
61 61  
62 62  [[image:1732877027638-368.png||data-xwiki-image-style-alignment="center"]]
63 63  
64 -* **RS-485 connection**: select the connection method “Serial port transport”, click the “Settings...” button. In the window that appears, select the COM port through which the PC connects to the device, and specify the baud rate to 115200 bit/s:
68 +* **RS-485 connection**: select the connection method “Serial port transport”, click the “Settings...” button. In the window that appears, select the COM port through which the PC connects to the device, and specify the baud rate (set up in BMS settings):
65 65  
66 66  [[image:1741006734310-418.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
67 67