Changes for page 4. Firmware update
Last modified by Admin on 2025/03/03 13:18
Summary
-
Page properties (1 modified, 0 added, 0 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,8 +1,5 @@ 1 -(% data-numbered-headings-start="4" style="--numbered-headings-start: 3;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %) 2 -= Firmware update = 1 +== 4.1 Introduction == 3 3 4 -== Introduction == 5 - 6 6 This document describes the steps for updating the BMS Main 2.x firmware. 7 7 8 8 Updating the BMS Main 2.x firmware can be done in the following ways: ... ... @@ -10,7 +10,7 @@ 10 10 * using ElectricDeviceMonitor via Ethernet, CAN or RS-485 bus; 11 11 * using the device web interface via Ethernet or Wi-Fi. 12 12 13 -== Updating via ElectricDeviceMonitor == 10 +== 4.2 Updating via ElectricDeviceMonitor == 14 14 15 15 The following hardware and software are required: 16 16 ... ... @@ -24,7 +24,7 @@ 24 24 * starting the bootloader; 25 25 * uploading the firmware file to the BMS Main 2.x flash memory. 26 26 27 -=== Start the device bootloader === 24 +==== 4.2.1 Start the device bootloader ==== 28 28 29 29 * **via Web Interface**: go to the "Service → Device" section and click on the link "Reset device and start loader": 30 30 ... ... @@ -43,7 +43,7 @@ 43 43 The bootloader will be active for 45 seconds. After this time, control will be transferred again to the main firmware. 44 44 ))) 45 45 46 -=== Upload the firmware. === 43 +==== 4.2.2 Upload the firmware. ==== 47 47 48 48 ~1. Launch the ElectricDeviceMonitor’s Updater module: 49 49 ... ... @@ -69,7 +69,7 @@ 69 69 70 70 4. Click the “Update” button **while the device is in bootloader mode**. The process of loading the new firmware into the device memory will begin. 71 71 72 -== Updating via WEB interface == 69 +== 4.3 Updating via WEB interface == 73 73 74 74 (% class="box warningmessage" %) 75 75 (((