Skip to Content

Changes for page 4. Firmware update

Last modified by Admin on 2025/03/03 13:18
From version 11.1
edited by Admin
on 2024/12/04 11:03
Change comment: There is no comment for this version
To version 19.1
edited by Admin
on 2025/03/03 13:16
Change comment: There is no comment for this version

Summary

Details

Page properties
Parent
... ... @@ -1,1 +1,1 @@
1 -drafts.BMS Main 2\.1.WebHome
1 +Battery management systems.BMS Main 2\.1.WebHome
Content
... ... @@ -1,19 +1,26 @@
1 -== 4.1 Introduction ==
1 +(% data-numbered-headings-start="4" style="--numbered-headings-start: 3;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
2 += Firmware update =
2 2  
4 +== Introduction ==
5 +
3 3  This document describes the steps for updating the BMS Main 2.x firmware.
4 4  
5 5  Updating the BMS Main 2.x firmware can be done in the following ways:
6 6  
7 -* using ElectricDeviceMonitor via Ethernet, CAN or RS-485 bus;
8 -* using the device web interface via Ethernet or Wi-Fi.
10 +* via ElectricDeviceMonitor by Ethernet, CAN or RS-485 bus;
11 +* via web interface by Ethernet or Wi-Fi.
9 9  
10 -== 4.2 Updating via ElectricDeviceMonitor ==
13 +== Updating via ElectricDeviceMonitor ==
11 11  
12 12  The following hardware and software are required:
13 13  
14 14  * ElectricDeviceMonitor application for Windows OS which is used for configuring the BMS Main 2.x.
15 -* USB/CAN adapter (for updating via CAN bus).
16 -* USB/RS-485 adapter (for updating via RS-485 bus).
18 +* Communication interface:
19 +** USB/CAN adapter (for updating by CAN bus);
20 +** USB/RS-485 adapter (for updating by RS-485 bus);
21 +** Ethernet cable (for updating via Ethernet);
22 +** BMS Wi-Fi installed on BMS Main 2.1 board (for updating by Wi-Fi);
23 +* SD-card installed on BMS Main 2.1 for update via web interface;
17 17  * Firmware file in .srec (Motorola S-record) format.
18 18  
19 19  Firmware updating includes two steps:
... ... @@ -21,7 +21,7 @@
21 21  * starting the bootloader;
22 22  * uploading the firmware file to the BMS Main 2.x flash memory.
23 23  
24 -==== 4.2.1 Start the device bootloader ====
31 +=== Start the device bootloader ===
25 25  
26 26  * **via Web Interface**: go to the "Service → Device" section and click on the link "Reset device and start loader":
27 27  
... ... @@ -40,7 +40,7 @@
40 40  The bootloader will be active for 45 seconds. After this time, control will be transferred again to the main firmware.
41 41  )))
42 42  
43 -==== 4.2.2 Upload the firmware. ====
50 +=== Upload the firmware ===
44 44  
45 45  ~1. Launch the ElectricDeviceMonitor’s Updater module:
46 46  
... ... @@ -58,15 +58,15 @@
58 58  
59 59  [[image:1732877027638-368.png||data-xwiki-image-style-alignment="center"]]
60 60  
61 -* **RS-485 connection**: select the connection method “Serial port transport”, click the “Settings...” button. In the window that appears, select the COM port through which the PC connects to the device, and specify the baud rate for the COM port:
68 +* **RS-485 connection**: select the connection method “Serial port transport”, click the “Settings...” button. In the window that appears, select the COM port through which the PC connects to the device, and specify the baud rate (set up in BMS settings):
62 62  
63 -[[image:1732877039628-104.png||data-xwiki-image-style-alignment="center"]]
70 +[[image:1741006734310-418.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
64 64  
65 -3. Click the "Browse..." button and select the *.srec file with the main firmware.
72 +3. Click the "Browse..." button and select the *.srec file with the BMS Main 2.1 firmware.
66 66  
67 67  4. Click the “Update” button **while the device is in bootloader mode**. The process of loading the new firmware into the device memory will begin.
68 68  
69 -== 4.3 Updating via WEB interface ==
76 +== Updating via WEB interface ==
70 70  
71 71  (% class="box warningmessage" %)
72 72  (((
1741006696516-394.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +6.9 KB
Content
1741006734310-418.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +6.9 KB
Content