Changes for page 4. Firmware update
Last modified by Admin on 2025/03/03 13:18
Summary
-
Page properties (3 modified, 0 added, 0 removed)
Details
- Page properties
-
- Title
-
... ... @@ -1,1 +1,1 @@ 1 - BMSMain2.1updateprocedure1 +4. Firmware update - Parent
-
... ... @@ -1,1 +1,1 @@ 1 -drafts. Firmware.WebHome1 +drafts.BMS Main 2\.1.WebHome - Content
-
... ... @@ -1,4 +1,4 @@ 1 -== 1. Introduction ==1 +== 4.1 Introduction == 2 2 3 3 This document describes the steps for updating the BMS Main 2.x firmware. 4 4 ... ... @@ -7,7 +7,7 @@ 7 7 * using ElectricDeviceMonitor via Ethernet, CAN or RS-485 bus; 8 8 * using the device web interface via Ethernet or Wi-Fi. 9 9 10 -== 2. Updating via ElectricDeviceMonitor ==10 +== 4.2 Updating via ElectricDeviceMonitor == 11 11 12 12 The following hardware and software are required: 13 13 ... ... @@ -21,7 +21,7 @@ 21 21 * starting the bootloader; 22 22 * uploading the firmware file to the BMS Main 2.x flash memory. 23 23 24 -==== 2.1 .Start the device bootloader ====24 +==== 4.2.1 Start the device bootloader ==== 25 25 26 26 * **via Web Interface**: go to the "Service → Device" section and click on the link "Reset device and start loader": 27 27 ... ... @@ -40,7 +40,7 @@ 40 40 The bootloader will be active for 45 seconds. After this time, control will be transferred again to the main firmware. 41 41 ))) 42 42 43 -==== 2.2. Upload the firmware. ====43 +==== 4.2.2 Upload the firmware. ==== 44 44 45 45 ~1. Launch the ElectricDeviceMonitor’s Updater module: 46 46 ... ... @@ -66,7 +66,7 @@ 66 66 67 67 4. Click the “Update” button **while the device is in bootloader mode**. The process of loading the new firmware into the device memory will begin. 68 68 69 -== 3. Updating via WEB interface ==69 +== 4.3 Updating via WEB interface == 70 70 71 71 (% class="box warningmessage" %) 72 72 (((