Skip to Content

Changes for page 3.6 Battery protection

Last modified by Admin on 2025/04/09 12:25
From version 4.19
edited by Admin
on 2024/11/21 18:24
Change comment: There is no comment for this version
To version 4.18
edited by Admin
on 2024/11/21 18:23
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -497,44 +497,12 @@
497 497  
498 498  If there are no temperature sensors connected to a BMS Logic board or any temperature sensor is shorted, the "No temp. sensors" error and "Temp. sensor is shorted" error are generated respectively. These errors generated and removed with the “Delay before setting the error” and “Delay before clearing the error” delays.
499 499  
500 -(% class="box warningmessage" %)
501 -(((
502 502  **If there is the “No temp. sensors” or “Temp. sensor is shorted” error, the “Critical error” is generated and all relays open.**
503 -)))
504 504  
505 505  == 3.6.18 Logic high temperature protection ==
506 506  
507 -To change the overheating protection parameters of BMS Logic boards, select the menu "Protections → Logic high temperature protection":
508 -
509 -
510 -In this section:
511 -
512 -* Enable – a flag to enable the protection;
513 -* Maximum Logic temperature, °C;
514 -* Tolerant Logic temperature, °C;
515 -* Lock the error until the device is reset.
516 -
517 -As a result of the operation of the protection from high temperatures of BMS Logic boards, the "Logic high temperature" is generated.
518 -
519 -Error generation conditions:
520 -
521 -* a BMS Logic board temperature is higher than the “Maximum Logic temperature” value.
522 -
523 -Conditions for removing the error:
524 -
525 -* a BMS Logic board temperature is less than the “Tolerant Logic temperature” value.
526 -
527 -(% class="box infomessage" %)
528 -(((
529 -**Cell balancing is prohibited for overheated boards.**
530 -)))
531 -
532 532  == 3.6.19 Logic offline protection ==
533 533  
534 -To change the protection parameters from loss of communication with BMS Logic boards, select the menu "Protections → Logic offline protection":
535 -
536 -
537 -
538 538  == 3.6.20 Cell count protection ==
539 539  
540 540  == 3.6.21 Logic count protection ==