Changes for page 3.6 Battery protection
Last modified by Admin on 2025/04/09 12:25
Summary
-
Page properties (1 modified, 0 added, 0 removed)
Details
- Page properties
-
- Content
-
... ... @@ -6,8 +6,9 @@ 6 6 7 7 [[Overcurrent protection settings>>image:1732211959984-118.png||data-xwiki-image-style-alignment="center" height="266" width="386"]] 8 8 9 - In this section: 10 10 10 +In this section: 11 + 11 11 * Enable – a flag to enable the protection; 12 12 * Maximum charging current, А; 13 13 * Tolerant charging current, А; ... ... @@ -31,7 +31,7 @@ 31 31 32 32 (% class="box infomessage" %) 33 33 ((( 34 -If there is the "Overcurrent" error, the charging and discharging relay open. 35 +If there is the "Overcurrent" error, the charging relay and discharging relay open. 35 35 ))) 36 36 37 37 == 3.6.2 Undervoltage protection == ... ... @@ -97,172 +97,35 @@ 97 97 If there is the "Overvoltage" error, the charging relay and discharging relay opens (if the “Switch off the discharging relay on error” flag is set). 98 98 ))) 99 99 100 - ==3.6.4 Low temperature protection==101 +3.6.4 Low temperature protection 101 101 102 - Theboardimplements batteryprotectionfrom too low temperature.103 +3.6.5 High temperature protection 103 103 104 - Tochangethe batteryprotection parametersfrom low temperature, select the menu "Protections → Low temperature protection":105 +3.6.6 Battery cover protection 105 105 107 +3.6.7 High humidity protection 106 106 107 -In this section: 108 - 109 -* Enable – a flag to enable the protection; 110 -* Minimum charging temperature, °C; 111 -* Tolerant charging temperature, °C; 112 -* Minimum discharging temperature, °C; 113 -* Tolerant discharging temperature, °C; 114 -* Delay before setting the error, second; 115 -* Delay before clearing the error, second; 116 -* Lock the error until the device is reset. 117 - 118 -As a result of the operation of the battery protection from low temperature, the "Low CH temperature" or “Low DCH temperature” error is generated. 119 - 120 -Error generation conditions: 121 - 122 -* the minimum temperature among all cells of the battery is less than the “Minimum charging (discharging) temperature” value for the “Delay before setting the error” time. 123 - 124 -Conditions for removing the error: 125 - 126 -* the minimum temperature among all cells of the battery is greater than the “Tolerant charging (discharging) temperature” value for the “Delay before clearing the error” time. 127 - 128 -(% class="box infomessage" %) 129 -((( 130 -If there is the "Low CH temperature" error, the charging relay opens. 131 -If there is the "Low DCH temperature" error, the discharging relay opens. 132 -))) 133 - 134 -== 3.6.5 High temperature protection == 135 - 136 -The board implements battery protection from too high temperature. 137 - 138 -To change the battery protection parameters from high temperature, select the menu "Protections → High temperature protection": 139 - 140 - 141 -In this section: 142 - 143 -* Enable – a flag to enable the protection; 144 -* Maximum charging temperature, °C; 145 -* Tolerant charging temperature, °C; 146 -* Maximum discharging temperature, °C; 147 -* Tolerant discharging temperature, °C; 148 -* Delay before setting the error, second; 149 -* Delay before clearing the error, second; 150 -* Lock the error until the device is reset. 151 - 152 -As a result of the operation of the battery protection from high temperature, the "High CH temperature" or “High DCH temperature” error is generated. 153 - 154 -Error generation conditions: 155 - 156 -* the maximum temperature among all cells of the battery is greater than the “Maximum charging (discharging) temperature” value for the “Delay before setting the error” time. 157 - 158 -Conditions for removing the error: 159 - 160 -* the maximum temperature among all cells of the battery is less than the “Tolerant charging (discharging) temperature” value for the “Delay before clearing the error” time. 161 - 162 -(% class="box infomessage" %) 163 -((( 164 -If there is the "High CH temperature" error, the charging relay opens. 165 -If there is the "High DCH temperature" error, the discharging relay opens. 166 -))) 167 - 168 -== 3.6.6 Battery cover protection == 169 - 170 -To change the protection parameters from opening the battery cover, select the menu "Protections → Battery cover protection": 171 - 172 -In this section: 173 - 174 -* Enable – a flag to enable the protection; 175 -* Delay before setting the error, second; 176 -* Delay before clearing the error, second; 177 -* Lock the error until the device is reset. 178 - 179 -As a result of the operation of the protection against opening the battery cover, the “Battery cover error” is generated. 180 - 181 -Error generation conditions: 182 - 183 -* there is a signal from the battery cover during the “Delay before setting the error” time. 184 - 185 -Conditions for removing the error: 186 - 187 -* no signal from the battery cover during the “Delay before clearing the error” time. 188 - 189 -(% class="box warningmessage" %) 190 -((( 191 -**If there is the "Battery cover error", the “Critical error” is generated and all relays open.** 192 -))) 193 - 194 -== 3.6.7 High humidity protection == 195 - 196 -The board can protect the battery from high humidity and water. 197 - 198 -To change the protection parameters of the battery from high humidity, select the menu "Protections → High humidity protection": 199 - 200 -In this section: 201 - 202 -* Enable – a flag to enable the protection; 203 -* Maximum humidty, RH%; 204 -* Tolerant humidty, RH%; 205 -* Delay before setting the error, second; 206 -* Delay before clearing the error, second; 207 -* Lock the error until the device is reset. 208 - 209 -As a result of the operation of the battery protection from high humidity, the "High humidity" error is generated. 210 - 211 -Error generation conditions: 212 - 213 -* the measured humidity is greater than “Maximum humidity” during the “Delay before setting the error” time. 214 - 215 -Conditions for removing the error: 216 - 217 -* the measured humidity is less than the “Tolerant humidity” during the “Delay before clearing the error” time. 218 - 219 -If there is the "High humidity" error, no action is taken. The error is indicative. 220 - 221 - 222 -== 3.6.8 Water protection == 223 - 224 -== 3.6.9 Current sensor error == 225 - 226 -== 3.6.10 Short circuit protection == 227 - 228 -== 3.6.11 Contactor high temperature protection == 229 - 230 -== 3.6.12 Unallowable charging protection == 231 - 232 -== 3.6.13 Stuck contactor protection == 233 - 234 -== 3.6.14 Contactor feedback check == 235 - 236 -== 3.6.15 Charging contactor cycles protection == 237 - 238 -== 3.6.16 Discharging contactor cycles protection == 239 - 240 -== 3.6.17 Temperature sensor error == 241 - 242 -== 3.6.18 Logic high temperature protection == 243 - 244 -== 3.6.19 Logic offline protection == 245 - 246 -== 3.6.20 Cell count protection == 247 - 248 -== 3.6.21 Logic count protection == 249 - 250 -== 3.6.22 WDT protection == 251 - 252 -== 3.6.23 Insulation monitoring == 253 - 254 -== 3.6.24 Critical error parameters == 255 - 256 -== 3.6.25 General error parameters == 257 - 258 -== 3.6.26 Low SOC signal == 259 - 260 -== 3.6.27 High charging current signal == 261 - 262 -== 3.6.28 Heater control == 263 - 264 -== 3.6.29 Heater (AUX) control == 265 - 266 -== 3.6.30 Cooler control == 267 - 268 -== 3.6.31 Fault simulation == 109 +3.6.8 Water protection 110 +3.6.9 Current sensor error 111 +3.6.10 Short circuit protection 112 +3.6.11 Contactor high temperature protection 113 +3.6.12 Unallowable charging protection 114 +3.6.13 Stuck contactor protection 115 +3.6.14 Contactor feedback check 116 +3.6.15 Charging contactor cycles protection 117 +3.6.16 Discharging contactor cycles protection 118 +3.6.17 Temperature sensor error 119 +3.6.18 Logic high temperature protection 120 +3.6.19 Logic offline protection 121 +3.6.20 Cell count protection 122 +3.6.21 Logic count protection 123 +3.6. WDT protection 124 +Insulation monitoring 125 +Critical error parameters 126 +General error parameters 127 +Low SOC signal 128 +High charging current signal 129 +Heater control 130 +Heater (AUX) control 131 +Cooler control 132 +Fault simulation