Skip to Content

Changes for page 3.6 Battery protection

Last modified by Admin on 2025/04/09 12:25
From version 33.7
edited by Admin
on 2024/11/21 19:03
Change comment: There is no comment for this version
To version 33.2
edited by Admin
on 2024/11/21 18:57
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -31,7 +31,7 @@
31 31  
32 32  (% class="box infomessage" %)
33 33  (((
34 -If there is the "Overcurrent" error, the **charging **and **discharging **relay open.
34 +If there is the "Overcurrent" error, the charging and discharging relay open.
35 35  )))
36 36  
37 37  == 3.6.2 Undervoltage protection ==
... ... @@ -63,7 +63,7 @@
63 63  
64 64  (% class="box infomessage" %)
65 65  (((
66 -If there is the "Undervoltage" error, the **discharging **relay opens.
66 +If there is the "Undervoltage" error, the discharging relay opens.
67 67  )))
68 68  
69 69  3.6.3 Overvoltage protection
... ... @@ -94,7 +94,7 @@
94 94  
95 95  (% class="box infomessage" %)
96 96  (((
97 -If there is the "Overvoltage" error, the **charging **relay and **discharging **relay opens (if the “Switch off the discharging relay on error” flag is set).
97 +If there is the "Overvoltage" error, the charging relay and discharging relay opens (if the “Switch off the discharging relay on error” flag is set).
98 98  )))
99 99  
100 100  == 3.6.4 Low temperature protection ==
... ... @@ -128,8 +128,8 @@
128 128  
129 129  (% class="box infomessage" %)
130 130  (((
131 -If there is the "Low CH temperature" error, the **charging **relay opens.
132 -If there is the "Low DCH temperature" error, the **discharging **relay opens.
131 +If there is the "Low CH temperature" error, the charging relay opens.
132 +If there is the "Low DCH temperature" error, the discharging relay opens.
133 133  )))
134 134  
135 135  == 3.6.5 High temperature protection ==
... ... @@ -163,8 +163,8 @@
163 163  
164 164  (% class="box infomessage" %)
165 165  (((
166 -If there is the "High CH temperature" error, the **charging **relay opens.
167 -If there is the "High DCH temperature" error, the **discharging **relay opens.
166 +If there is the "High CH temperature" error, the charging relay opens.
167 +If there is the "High DCH temperature" error, the discharging relay opens.
168 168  )))
169 169  
170 170  == 3.6.6 Battery cover protection ==
... ... @@ -192,7 +192,7 @@
192 192  
193 193  (% class="box warningmessage" %)
194 194  (((
195 -If there is the "Battery cover error", the **“Critical error” **is generated and **all relays open.**
195 +If there is the "Battery cover error", **the “Critical error” is generated and all relays open.**
196 196  )))
197 197  
198 198  == 3.6.7 High humidity protection ==
... ... @@ -254,7 +254,7 @@
254 254  
255 255  (% class="box warningmessage" %)
256 256  (((
257 -If there is the “Water” error,** **the **“Critical error”** is generated and **all relays open.**
257 +**If there is the “Water” error, the “Critical error” is generated and all relays open.**
258 258  )))
259 259  
260 260  == 3.6.9 Current sensor error ==
... ... @@ -288,7 +288,7 @@
288 288  
289 289  (% class="box warningmessage" %)
290 290  (((
291 -If there is the “Current sensor error”, the **“Critical error” **is generated and **all relays open.**
291 +**If there is the “Current sensor error”, the “Critical error” is generated and all relays open.**
292 292  )))
293 293  
294 294  == 3.6.10 Short circuit protection ==
... ... @@ -322,7 +322,7 @@
322 322  
323 323  (% class="box infomessage" %)
324 324  (((
325 -If there is the "Short circuit" error, the **charging **relay opens (the “Switch off the charging relay on error” flag is set) and the **discharging **relay opens (the “Switch off the discharging relay on error flag” is set).
325 +If there is the "Short circuit" error, the charging relay opens (the “Switch off the charging relay on error” flag is set) and the discharging relay opens (the “Switch off the discharging relay on error flag” is set).
326 326  )))
327 327  
328 328  == 3.6.11 Contactor high temperature protection ==
... ... @@ -356,7 +356,7 @@
356 356  
357 357  (% class="box infomessage" %)
358 358  (((
359 -If there is the "Contactor high temperature" error, the **charging **relay opens (the “Switch off the charging relay on error” flag is set) and the **discharging **relay opens (the “Switch off the discharging relay on error flag” is set).
359 +If there is the "Contactor high temperature" error, the charging relay opens (the “Switch off the charging relay on error” flag is set) and the discharging relay opens (the “Switch off the discharging relay on error flag” is set).
360 360  )))
361 361  
362 362  == 3.6.12 Unallowable charging protection ==
... ... @@ -386,7 +386,7 @@
386 386  
387 387  (% class="box infomessage" %)
388 388  (((
389 -If there is the "Unallowable charging" error, the **discharging **relay opens.
389 +If there is the "Unallowable charging" error, the discharging relay opens.
390 390  )))
391 391  
392 392  == 3.6.13 Stuck contactor protection ==
... ... @@ -410,11 +410,6 @@
410 410  
411 411  * charging and discharging contactors are open, but the “Charging current present” or “Discharging current present” signal is set.
412 412  
413 -(% class="box warningmessage" %)
414 -(((
415 -If there is the “Stuck contactor error”, the **“Critical error” **is generated and **all relays open.**
416 -)))
417 -
418 418  == 3.6.14 Contactor feedback check ==
419 419  
420 420  The BMS Main 2.x can receive feedback signals from contactors and detect discrepancy between the control value and the feedback signal. To enable specific contactor protection, one of the discrete input must be set as corresponding contactor feedback signal (see section Input and output signals).
... ... @@ -434,7 +434,6 @@
434 434  
435 435  * discrete output of charging, precharge, discharging, charging/discharging or main contactor not matches its feedback value.
436 436  
437 -
438 438  == 3.6.15 Charging contactor cycles protection ==
439 439  
440 440  The BMS protects the charging contactor against frequent switching.
... ... @@ -465,7 +465,7 @@
465 465  
466 466  (% class="box infomessage" %)
467 467  (((
468 -If there is the "CH contactor cycles error" error, the **charging **relay opens.
462 +If there is the "CH contactor cycles error" error, the charging relay opens.
469 469  )))
470 470  
471 471  == 3.6.16 Discharging contactor cycles protection ==
... ... @@ -498,7 +498,7 @@
498 498  
499 499  (% class="box infomessage" %)
500 500  (((
501 -If there is the "DCH contactor cycles error" error, the **discharging **relay opens.
495 +If there is the "DCH contactor cycles error" error, the discharging relay opens.
502 502  )))
503 503  
504 504  == 3.6.17 Temperature sensor error ==
... ... @@ -520,7 +520,7 @@
520 520  
521 521  (% class="box warningmessage" %)
522 522  (((
523 -If there is the “No temp. sensors” or “Temp. sensor is shorted” error, the **“Critical error” **is generated and **all relays open.**
517 +**If there is the “No temp. sensors” or “Temp. sensor is shorted” error, the “Critical error” is generated and all relays open.**
524 524  )))
525 525  
526 526  == 3.6.18 Logic high temperature protection ==
... ... @@ -548,7 +548,7 @@
548 548  
549 549  (% class="box infomessage" %)
550 550  (((
551 -Cell balancing is prohibited for overheated boards.
545 +**Cell balancing is prohibited for overheated boards.**
552 552  )))
553 553  
554 554  == 3.6.19 Logic offline protection ==
... ... @@ -574,7 +574,7 @@
574 574  
575 575  (% class="box warningmessage" %)
576 576  (((
577 -If there is the "Logic offline" error, the **“Critical error”** is generated and **all relays open.**
571 +**If there is the "Logic offline" error, the “Critical error” is generated and all relays open.**
578 578  )))
579 579  
580 580  == 3.6.20 Cell count protection ==
... ... @@ -603,7 +603,7 @@
603 603  
604 604  (% class="box warningmessage" %)
605 605  (((
606 -If there is the "Cell count error",** **the **“Critical error”** is generated and **all relays open.**
600 +**If there is the "Cell count error", the “Critical error” is generated and all relays open.**
607 607  )))
608 608  
609 609  == 3.6.21 Logic count protection ==
... ... @@ -631,7 +631,7 @@
631 631  
632 632  (% class="box warningmessage" %)
633 633  (((
634 -If there is the "Logic count error", the **“Critical error” **is generated and **all relays open.**
628 +**If there is the "Logic count error", the “Critical error” is generated and all relays open.**
635 635  )))
636 636  
637 637  == 3.6.22 WDT protection ==
... ... @@ -654,7 +654,7 @@
654 654  
655 655  (% class="box warningmessage" %)
656 656  (((
657 -If there is the "WDT reset" error, the **“Critical error”** is generated and** all relays open.**
651 +**If there is the "WDT reset" error, the “Critical error” is generated and all relays open.**
658 658  )))
659 659  
660 660  == 3.6.23 Insulation monitoring ==
... ... @@ -728,10 +728,7 @@
728 728  
729 729  The “General error” is cleared if there are no errors from selected list during the “Delay before clearing the error” time.
730 730  
731 -(% class="box infomessage" %)
732 -(((
733 733  The "General error" is //indicative //and can be linked to any discrete output of the board.
734 -)))
735 735  
736 736  == 3.6.26 Low SOC signal ==
737 737  
... ... @@ -756,10 +756,7 @@
756 756  
757 757  * the battery SOC is greater than the “Tolerant SOC” during the “Delay before clearing the signal” time.
758 758  
759 -(% class="box infomessage" %)
760 -(((
761 761  The "Low SOC signal" is //indicative //and can be linked to any discrete output of the board.
762 -)))
763 763  
764 764  == 3.6.27 High charging current signal ==
765 765  
... ... @@ -784,10 +784,7 @@
784 784  
785 785  * the measured current is less than the “Tolerant charging current” value during the “Delay before clearing the signal” time.
786 786  
787 -(% class="box infomessage" %)
788 -(((
789 789  The "High charging current" signal is //indicative //and can be linked to any discrete output of the board.
790 -)))
791 791  
792 792  == 3.6.28 Heater control ==
793 793  
... ... @@ -817,7 +817,7 @@
817 817  
818 818  (% class="box infomessage" %)
819 819  (((
820 -If there is the "Heater" signal, the **heater **relay closes and/or a signal is output to the corresponded digital output.
805 +If there is the "Heater" signal, the heater relay closes and/or a signal is output to the corresponded digital output.
821 821  )))
822 822  
823 823  == 3.6.29 Heater (AUX) control ==
... ... @@ -848,7 +848,7 @@
848 848  
849 849  (% class="box infomessage" %)
850 850  (((
851 -If there is the "Heater (AUX)" signal, the **auxiliary heater **relay closes and/or a signal is output to the corresponded digital output.
836 +If there is the "Heater (AUX)" signal, the auxiliary heater relay closes and/or a signal is output to the corresponded digital output.
852 852  )))
853 853  
854 854  == 3.6.30 Cooler control ==
... ... @@ -879,7 +879,7 @@
879 879  
880 880  (% class="box infomessage" %)
881 881  (((
882 -If there is the "Cooler" signal, the **cooler **relay closes and/or a signal is output to the corresponded digital output.
867 +If there is the "Cooler" signal, the cooler relay closes and/or a signal is output to the corresponded digital output.
883 883  )))
884 884  
885 885  == 3.6.31 Fault simulation ==