Skip to Content

Changes for page 3.6 Battery protection

Last modified by Admin on 2025/04/09 12:25
From version 33.14
edited by Admin
on 2024/11/21 19:16
Change comment: There is no comment for this version
To version 33.6
edited by Admin
on 2024/11/21 19:01
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -410,10 +410,6 @@
410 410  
411 411  * charging and discharging contactors are open, but the “Charging current present” or “Discharging current present” signal is set.
412 412  
413 -(% class="box warningmessage" %)
414 -(((
415 -If there is the “Stuck contactor error”, the **“Critical error” **is generated and **all relays open.**
416 -)))
417 417  
418 418  == 3.6.14 Contactor feedback check ==
419 419  
... ... @@ -434,10 +434,6 @@
434 434  
435 435  * discrete output of charging, precharge, discharging, charging/discharging or main contactor not matches its feedback value.
436 436  
437 -(% class="box warningmessage" %)
438 -(((
439 -If there is the contactor feedback error, the **“Critical error” **is generated and **all relays open.**
440 -)))
441 441  
442 442  == 3.6.15 Charging contactor cycles protection ==
443 443  
... ... @@ -678,11 +678,6 @@
678 678  
679 679  Error is set if corresponding discrete input is set up and it received logical zero.
680 680  
681 -(% class="box warningmessage" %)
682 -(((
683 -If there is the "Insulation monitoring" error, the **“Critical error”** is generated and** all relays open.**
684 -)))
685 -
686 686  == 3.6.24 Critical error parameters ==
687 687  
688 688  To change the critical error parameters, select the menu "Protections → Critical error parameters":
... ... @@ -707,12 +707,10 @@
707 707  * “No temp. sensors”;
708 708  * “Temp. sensor is shorted”;
709 709  * “Current sensor error”;
710 -* "Stuck contactor"
711 711  * “Shunt offline”;
712 712  * “Shunt error”;
713 713  * “Settings error”;
714 -* “WDT reset”
715 -* "Insulation monitoring".
700 +* “WDT reset”.
716 716  
717 717  The “Critical error” is cleared if there are no errors from the list above during the “Delay before clearing the error” time.
718 718  
... ... @@ -890,7 +890,7 @@
890 890  
891 891  (% class="box infomessage" %)
892 892  (((
893 -If there is the "Cooler" signal, the **cooler **relay closes and/or a signal is output to the corresponded digital output.
878 +If there is the "Cooler" signal, the cooler relay closes and/or a signal is output to the corresponded digital output.
894 894  )))
895 895  
896 896  == 3.6.31 Fault simulation ==