Changes for page 3.6 Battery protection

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -4,33 +4,4 @@
4	4
5	5	To change the current protection of the battery, select the menu "Protections → Overcurrent protection":
6	6
7		-[[Overcurrent protection settings>>image:1732211959984-118.png||data-xwiki-image-style-alignment="center" height="266" width="386"]]
8		-
9		-
10		-In this section:
11		-
12		-* Enable – a flag to enable the protection;
13		-* Maximum charging current, А;
14		-* Tolerant charging current, А;
15		-* Maximum discharging current, А;
16		-* Tolerant discharging current, А;
17		-* Delay before setting the error, second;
18		-* Delay before clearing the error, second;
19		-* Lock the error until the device is reset – a flag to block the error until the board is restarted.
20		-
21		-As a result of operation of the current protection, the "Overcurrent" error is generated.
22		-
23		-Error generation conditions:
24		-
25		-* the current is positive (charging), and its modulo value is greater than the “Maximum charging current” value for the “Delay before setting the error” time;
26		-* the current is negative (discharging), and its modulo value is greater than the “Maximum discharging current” value for the “Delay before setting the error” time.
27		-
28		-Conditions for removing the error:
29		-
30		-* the current is positive (charging) or zero, and its modulo value is less than the “Tolerant charging current” value for the “Delay before clearing the error” time;
31		-* the current is negative (discharging), and its modulo value is less than the “Tolerant discharging current” value for the “Delay before clearing the error” time.
32		-
33		-(% class="box infomessage" %)
34		-(((
35		-If there is the "Overcurrent" error, the charging relay and discharging relay open.
36		-)))
	7	+[[image:1732211959984-118.png]]