Skip to Content

Changes for page 3.6 Battery protection

Last modified by Admin on 2025/04/09 12:25
From version 2.2
edited by Admin
on 2024/11/21 18:00
Change comment: There is no comment for this version
To version 3.1
edited by Admin
on 2024/11/21 18:03
Change comment: Uploaded new attachment "1732212212350-294.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -4,4 +4,33 @@
4 4  
5 5  To change the current protection of the battery, select the menu "Protections → Overcurrent protection":
6 6  
7 -[[image:1732211959984-118.png]]
7 +[[Overcurrent protection settings>>image:1732211959984-118.png||data-xwiki-image-style-alignment="center" height="266" width="386"]]
8 +
9 +
10 +In this section:
11 +
12 +* Enable – a flag to enable the protection;
13 +* Maximum charging current, А;
14 +* Tolerant charging current, А;
15 +* Maximum discharging current, А;
16 +* Tolerant discharging current, А;
17 +* Delay before setting the error, second;
18 +* Delay before clearing the error, second;
19 +* Lock the error until the device is reset – a flag to block the error until the board is restarted.
20 +
21 +As a result of operation of the current protection, the "Overcurrent" error is generated.
22 +
23 +Error generation conditions:
24 +
25 +* the current is positive (charging), and its modulo value is greater than the “Maximum charging current” value for the “Delay before setting the error” time;
26 +* the current is negative (discharging), and its modulo value is greater than the “Maximum discharging current” value for the “Delay before setting the error” time.
27 +
28 +Conditions for removing the error:
29 +
30 +* the current is positive (charging) or zero, and its modulo value is less than the “Tolerant charging current” value for the “Delay before clearing the error” time;
31 +* the current is negative (discharging), and its modulo value is less than the “Tolerant discharging current” value for the “Delay before clearing the error” time.
32 +
33 +(% class="box infomessage" %)
34 +(((
35 +If there is the "Overcurrent" error, the charging relay and discharging relay open.
36 +)))
1732212212350-294.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +17.0 KB
Content