Changes for page 3.6 Battery protection

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -3,3 +3,34 @@
3	3	== 3.6.1 Overcurrent protection ==
4	4
5	5	To change the current protection of the battery, select the menu "Protections → Overcurrent protection":
	6	+
	7	+[[Overcurrent protection settings>>image:1732211959984-118.png||data-xwiki-image-style-alignment="center" height="266" width="386"]]
	8	+
	9	+
	10	+In this section:
	11	+
	12	+* Enable – a flag to enable the protection;
	13	+* Maximum charging current, А;
	14	+* Tolerant charging current, А;
	15	+* Maximum discharging current, А;
	16	+* Tolerant discharging current, А;
	17	+* Delay before setting the error, second;
	18	+* Delay before clearing the error, second;
	19	+* Lock the error until the device is reset – a flag to block the error until the board is restarted.
	20	+
	21	+As a result of operation of the current protection, the "Overcurrent" error is generated.
	22	+
	23	+Error generation conditions:
	24	+
	25	+* the current is positive (charging), and its modulo value is greater than the “Maximum charging current” value for the “Delay before setting the error” time;
	26	+* the current is negative (discharging), and its modulo value is greater than the “Maximum discharging current” value for the “Delay before setting the error” time.
	27	+
	28	+Conditions for removing the error:
	29	+
	30	+* the current is positive (charging) or zero, and its modulo value is less than the “Tolerant charging current” value for the “Delay before clearing the error” time;
	31	+* the current is negative (discharging), and its modulo value is less than the “Tolerant discharging current” value for the “Delay before clearing the error” time.
	32	+
	33	+(% class="box infomessage" %)
	34	+(((
	35	+If there is the "Overcurrent" error, the charging relay and discharging relay open.
	36	+)))