Changes for page 3.5 Battery control
Last modified by Admin on 2025/03/10 12:50
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 1 added, 0 removed)
Details
- Page properties
-
- Content
-
... ... @@ -144,4 +144,22 @@ 144 144 145 145 To change the parameters of the powering of external equipment, select the menu "Cells → Discharging (AUX) control": 146 146 147 -[[Caption>>image:1732208939544-710.png||data-xwiki-image-style-alignment="center" height="397" width="445"]] 147 +[[Discharging (AUX) control settings>>image:1732208939544-710.png||data-xwiki-image-style-alignment="center" height="397" width="445"]] 148 + 149 +In this section: 150 + 151 +* Enable – a flag to activate the auxiliary discharge control; 152 +* Switch off the discharging (AUX) relay at low SOC: 153 +** Minimum SOC – a minimum SOC value, when reached, the auxiliary (AUX) discharging relay opens, %; 154 +** Tolerant SOC – a permissive SOC value, upon reaching which the auxiliary (AUX) discharging relay re-closes, %; 155 +* Switch off the discharging (AUX) relay if the battery voltage is out of the range: 156 +** Minimum voltage – minimum battery voltage, V; 157 +** Maximum voltage – maximum battery voltage, V; 158 +* Switch off the discharging (AUX) relay on errors – the auxiliary (AUX) discharging relay opens if the following errors occur: Undervoltage, Overcurrent, High temperature (discharging), Short circuit, Critical error. 159 + 160 +== 3.5.4 Charging/Discharging control == 161 + 162 + 163 +BMS Main 2.x allows to control charging/discharging contactor that combines algorithms of charging and discharging contactor. It behaves as charging contactor when «Charge request» or «Charger connected» are set, otherwise – as discharging contactor. 164 + 165 +To change the parameters of the charging/discharging algorithm, select the menu "Cells → Charging/Discharging control":
- 1732209044117-558.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.admin - Size
-
... ... @@ -1,0 +1,1 @@ 1 +6.9 KB - Content