Skip to Content

Changes for page 3.5 Battery control

Last modified by Admin on 2025/03/10 12:50
From version 11.3
edited by Admin
on 2025/01/11 19:01
Change comment: There is no comment for this version
To version 13.1
edited by Admin
on 2025/01/11 19:07
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -155,12 +155,15 @@
155 155  In this section:
156 156  
157 157  * Enable – a flag to activate the auxiliary discharge control;
158 -* Switch off the discharging (AUX) relay at low SOC:
158 +* Switch off the discharging (AUX) relay at when the battery SOC is low:
159 159  ** Minimum SOC – a minimum SOC value, when reached, the auxiliary (AUX) discharging relay opens, %;
160 160  ** Tolerant SOC – a permissive SOC value, upon reaching which the auxiliary (AUX) discharging relay re-closes, %;
161 +* Switch off the discharging (AUX) relay when the cell voltage is low:
162 +** Minimum cell voltage – a minimum cell voltage, when reached, the auxiliary (AUX) discharging relay opens, %;
163 +** Tolerant cell voltage – a permissive cell voltage, upon reaching which the auxiliary (AUX) discharging relay re-closes, %;
161 161  * Switch off the discharging (AUX) relay if the battery voltage is out of the range:
162 -** Minimum voltage – minimum battery voltage, V;
163 -** Maximum voltage – maximum battery voltage, V;
165 +** Minimum battery voltage – minimum battery voltage, V;
166 +** Maximum battery voltage – maximum battery voltage, V;
164 164  * Switch off the discharging (AUX) relay on errors – the auxiliary (AUX) discharging relay opens if the following errors occur: Undervoltage, Overcurrent, High temperature (discharging), Short circuit, Critical error.
165 165  
166 166  === Charging/Discharging control ===