Skip to Content

Changes for page 3.4 Battery parameters

Last modified by Admin on 2025/04/09 12:04
From version 31.3
edited by Admin
on 2025/02/20 11:09
Change comment: There is no comment for this version
To version 29.1
edited by Admin
on 2025/02/17 17:28
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -48,8 +48,6 @@
48 48  * Final SOC – a method of calculating the battery SOC:
49 49  ** Minimum cell SOC – the battery SOC is assumed to be equal to the minimum SOC of cells;
50 50  ** Average cell SOC – the battery SOC is assumed to be equal to the average SOC of cells;
51 -** Min-Max SOC – the battery SOC is calculated based on the minimum and maximum SOC of the cells. Final SOC will be a) 100% if any cell has 100% SOC, b) 0% if any cell has 0% SOC;
52 -** Max-Min SOC – the battery SOC is calculated based on the minimum and maximum SOC of the cells. Final SOC will be a) 100% if all cells have 100% SOC, b) 0% if all cells have 0% SOC;
53 53  * Scale the final SOC – flag to scale the battery SOC by the following values;
54 54  * Internal SOC corresponding to 0% – battery SOC that sets to be 0%;
55 55  * Internal SOC corresponding to 100% – battery SOC that sets to be 100%.
... ... @@ -79,14 +79,8 @@
79 79  
80 80  The second method is used for a stepwise change in the current through the cell, while the value of the cell resistance:
81 81  
82 -R = (U,,2,,-U,,1,,) / (I,,stable2,,-I,,stable1,,)
80 +R = (U,,2,,-U,,1,,) / (I,,stable2,,-I,,stable1,,) provided that | I,,stable2,,-I,,stable1,, | > 0.2 × Q,,max,,
83 83  
84 -provided that
85 -
86 -~{~{formula fontSize="SMALL"}}
87 -~| I_{stable2}-I_{stable1} | > 0.2 × Qmax
88 -~{~{/formula}}
89 -
90 90  (Q,,max,, is the maximum cell capacity),
91 91  
92 92  where U,,2,, is the voltage on the cell at the moment when the stabilized current I,,stable2,, is flowing through it; U,,1,, – the voltage on the cell at the moment when the stabilized current I,,stable1,, flowing through it.
... ... @@ -142,7 +142,7 @@
142 142  
143 143  To change the cell balancing parameters, select the menu "Cell → Cell balancing":
144 144  
145 -[[image:1739812799920-892.png||alt="1732207485773-804.png" data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="264" width="387"]]
137 +[[image:1732207485773-804.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="264" width="387"]]
146 146  
147 147  In this section:
148 148  
... ... @@ -154,13 +154,8 @@
154 154  ** Charging;
155 155  ** Charging or relaxed;
156 156  ** Always (regardless of battery state);
157 -* Balancing condition:
158 -** Automatic – balancing will be performed automatically if needed conditions are met;
159 -** On balancing request – balancing will start only if a remote request is received. In this case cells will start to balance regardless the "Voltage deviation to start balancing" value;
160 160  * Minimum cell voltage to start balancing, V;
161 -* Deviation to start balancing;
162 -* Deviation to stop balancing;
163 -* Voltage for forced balancing – if cell voltage is above this value, it will start discharging through balancing resistor;
150 +* Balancing threshold, V;
164 164  * Start cell discharging – a command to start forced balancing of all battery cells (used for service purposes);
165 165  * Stop cell discharging – a command to stop forced balancing of all battery cells (used for service purposes).
166 166