Changes for page 3.4 Battery parameters

Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -73,19 +73,25 @@
73	73
74	74	Calculation of the resistance of cells is carried out in two ways. The first method is used when the battery passes from a relaxation state to a charge or discharge state, wherein the cell resistance value
75	75
76		-R = (U-Uocv) / Istable,
	76	+{{formula fontSize="SMALL" imageType="PNG"}}
	77	+R = \frac{U-U_{ocv}}{I_{stable}}
	78	+{{/formula}}
77	77
78	78	where U is the cell voltage measured in the charge or discharge state, V; Uocv is the cell voltage measured in the state of relaxation (before switching to the state of charge or discharge); Istable – stabilized current through the cell in the state of charge or discharge.
79	79
80	80	The second method is used for a stepwise change in the current through the cell, while the value of the cell resistance:
81	81
82		-R = (U,,2,,-U,,1,,) / (I,,stable2,,-I,,stable1,,)
	84	+{{formula fontSize="SMALL"}}
	85	+R = \frac{U_2-U_1}{I_{stable2}-I_{stable1}}
	86	+{{/formula}}
83	83
84		-provided that | I,,stable2,,-I,,stable1,, | > 0.2 × Q,,max,,
	88	+provided that
85	85
86		-(Q,,max,, is the maximum cell capacity),
	90	+{{formula fontSize="SMALL"}}
	91	+| I_{stable2}-I_{stable1} | > 0.2 × Q_{max}
	92	+{{/formula}}
87	87
88		-where U,,2,, is the voltage on the cell at the moment when the stabilized current I,,stable2,, is flowing through it; U,,1,, – the voltage on the cell at the moment when the stabilized current I,,stable1,, flowing through it.
	94	+where Q,,max,, is the maximum cell capacity; U,,2,, is the voltage on the cell at the moment when the stabilized current I,,stable2,, is flowing through it; U,,1,, – the voltage on the cell at the moment when the stabilized current I,,stable1,, flowing through it.
89	89
90	90	The stabilized current I,,stable,, = I, if during the stabilization time the instantaneous current I is in the range from 0.95 × I to 1.05 × I.
91	91