Skip to Content
Last modified by Admin on 2025/04/09 12:34
From version 4.1
edited by Admin
on 2024/11/21 15:13
Change comment: Uploaded new attachment "1732201986070-992.png", version {1}
To version 7.5
edited by Admin
on 2024/11/21 15:22
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,6 +1,6 @@
1 1  == 3.3.1 Input signals ==
2 2  
3 -The BMS Main 2.x board has 4 digital inputs of the "dry contact" type. For each discrete input, its purpose and the inversion requirement are specified. The following discrete input assignment options are supported:
3 +The BMS Main 2.x board has 4 discrete inputs of the "dry contact" type. For each discrete input, its purpose and the inversion requirement are specified. The following discrete input assignment options are supported:
4 4  
5 5  * no signal;
6 6  * signal from battery cover;
... ... @@ -36,10 +36,10 @@
36 36  
37 37  BMS Main 2.x board has 4 analog inputs for connecting current, temperature and humidity sensors. **Assignment of analog inputs must be selected as follows**:
38 38  
39 -* Analog Input #1– Current sensor;
40 -* Analog Input #2– No input / Current zero level (see note);
41 -* Analog Input #3 – No input / Temperature sensor / Current sensor (AUX) / Current zero level (AUX);
42 -* Analog Input #4 – No input / Humidity sensor / Current sensor (AUX) / Current zero level (AUX).
39 +* Analog Input #1 – Current sensor;
40 +* Analog Input #2 – No input / Current sensor reference line / Current sensor (2nd range) (see note);
41 +* Analog Input #3 – No input / Temperature sensor / Current sensor (AUX);
42 +* Analog Input #4 – No input / Humidity sensor / Current reference line (AUX) / Current sensor (2nd range) (AUX).
43 43  
44 44  (% class="box warningmessage" %)
45 45  (((
... ... @@ -53,7 +53,71 @@
53 53  
54 54  (% class="box infomessage" %)
55 55  (((
56 -**Note:** The default setting for Analog input #2 is "No signal". If it is necessary to use a current sensor with an additional zero level signal, set the "Current zero level" assignment.
56 +**Note:** The default setting for Analog input #2 is "No signal". If it is necessary to use a current sensor with an additional zero level signal, set the "Current sensor reference line" assignment.
57 57  )))
58 58  
59 59   To configure the input discrete and analog signals, select the menu "Signals → Input signals":
60 +
61 +[[Input signals section>>image:1732201986070-992.png||data-xwiki-image-style-alignment="center" height="290" width="272"]]
62 +
63 + The order of the numbering of the discrete and analog inputs corresponds to the order of the numbering on the board.
64 +
65 +In this section:
66 +
67 +* Discrete inputs:
68 +** No input;
69 +** Battery cover – a signal from the battery cover trailer;
70 +** Charger connected – a signal from the charger connector;
71 +** Power up/down request – a signal from the external power monitor which is used for proper powering BMS up or down;
72 +** Inhibit charging – a command to open the charging relay;
73 +** Inhibit discharging – a command to open the discharging relay;
74 +** CH contactor feedback – a feedback signal from the charging contactor;
75 +** DCH contactor feedback – a feedback signal from the discharging contactor;
76 +** Insulation status – a signal from an external insulation monitoring device;
77 +** Charge request – a request for closing the charging contactor;
78 +** Precharge request – a request for closing the precharging contactor;
79 +** Discharge request – a request for closing the discharging contactor;
80 +** PCH contactor feedback – a feedback signal from the precharging contactor;
81 +** CH/DCH contactor feedback – a feedback signal from the charging/discharging contactor;
82 +** Main contactor feedback – a feedback signal from the main contactor.
83 +* Analog inputs:
84 +** No input;
85 +** Current sensor;
86 +** Current zero level;
87 +** Temperature sensor;
88 +** Humidity sensor;
89 +** Current sensor (AUX) – additional current sensor for measuring current in a series of cells;
90 +** Current zero level (AUX) – zero level bus for additional current sensor.
91 +
92 +=== 3.3.2 Current sensor ===
93 +
94 +After selecting the assignment of the analog inputs, you need to configure the parameters of the sensors connected to the board.
95 +
96 +To configure the current sensor parameters, select the menu "Signals → Current sensor":
97 +
98 +[[Current sensor settings>>image:1732202357233-620.png||data-xwiki-image-style-alignment="center" height="453" width="284"]]
99 +
100 +
101 +In the «Primary sensor» и «Auxiliary sensor» sections:
102 +
103 +* Sensor type – drop-down menu with supported sensor types;
104 +* Nominal current – rated current of the sensor according to the datasheet, А;
105 +* Sensitivity – sensitivity of the current sensor according to the datasheet, V / I,,nominal.,,;
106 +* Zero level – level "0A" of the current sensor, V;
107 +* Multiply the charging current (experimental) – experimental flag for scaling the charging current by given multiplier;
108 +* Multiplier – charging current multiplier;
109 +
110 +In the «Options» section:
111 +
112 +* Calibrate sensor on startup – calibration flag (zero level setting) of the current sensor when the board is started;
113 +* Calibration time – calibration time of the current sensor, second;
114 +* System consumption (current offset) – consumption of the BMS system from the battery, A; This setting is used to adjust the current sensor;
115 +* Set sensor zero level – command set the zero level of the current sensor (used for service purposes).
116 +
117 +(% class="box infomessage" %)
118 +(((
119 +If the "Sensor type" is selected, the “Nominal current” and “Sensitivity” fields are automatically filled.
120 +If the "Sensor type" has no necessary preset, the “Nominal current” and “Sensitivity” parameters must be **manually **entered.
121 +)))
122 +
123 +Calibration of the current sensor (“Calibrate sensor on startup” flag) is necessary if the sensor does not have a reference line (za).
1732202357233-620.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +35.0 KB
Content
1732202402284-903.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +60.3 KB
Content
1732202427741-614.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +7.1 KB
Content