Skip to Content
Last modified by Admin on 2026/04/24 10:30
From version 29.1
edited by Admin
on 2025/04/09 12:34
Change comment: There is no comment for this version
To version 30.17
edited by Admin
on 2026/04/24 10:30
Change comment: Renamed back-links.

Summary

Details

Page properties
Content
... ... @@ -80,7 +80,14 @@
80 80  
81 81  In the «Primary sensor» и «Auxiliary sensor» sections:
82 82  
83 -* Sensor type – drop-down menu with supported sensor types;
83 +* Sensor type – drop-down menu with presets for most popular sensor types;
84 +* Mode – auxiliary sensor mode:
85 +** Disabled – auxiliary sensor is not used:
86 +** Parallel sensors – auxiliary sensor is located in parallel circuit. Final current is estimated as sum of both sensors values;
87 +** Serial sensors – auxiliary sensor is located on the same circuit. Final current is estimated as average of both sensors values;
88 +** Separated sensors – auxiliary sensor is used to measure the current in second series of cells (см. [[Series balancing>>url:https://docs.movicomelectric.com/bin/view/Battery%20management%20systems/BMS%20Main%202.1/3.%20Configuration/3.4%20Battery%20parameters/?HSeriesbalancing#HSeriesbalancing]]);
89 +** Dual range sensor – auxiliary sensor line i used to measure the second coil of dual range sensor;
90 +** Separate dual range sensors – auxiliary sensor and main sensor are dual range sensors, located on the same line (P13 header modification is required!);
84 84  * Nominal current – rated current of the sensor according to the datasheet, А;
85 85  * Sensitivity – sensitivity of the current sensor according to the datasheet, V / I,,nominal.,,;
86 86  * Zero level – level "0A" of the current sensor, V;