Изменения документа 3.3 Input and output signals

Сводка

• Свойства страницы (1 изменено, 0 добавлено, 0 удалено)

Подробности

Свойства страницы

Содержимое

...	...	@@ -140,14 +140,14 @@
140	140
141	141	=== Temperature sensor ===
142	142
143		-To configure the temperature sensor parameters, select the menu "Signals → Temperature sensor":
	143	+Для настройки параметров **датчиков температуры** необходимо выбрать меню «Signals → Temperature sensor»:
144	144
145	145	[[image:1732204766138-628.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="112" width="256"]]
146	146
147		-In this section:
	147	+В данном разделе:
148	148
149		-* Type – type of temperature sensors;
150		-* Mask – mask to ignore the temperature from the corresponding temperature sensors; bit //i// corresponds to temperature input #(//i//+1) of each BMS Logic device; mask 0x1 means that the BMS marks all temperature sensors connected to input #1 of each BMS Logic device as missing and doesn't use them in calculations.
	149	+* Type – тип датчика температуры;
	150	+* Mask – маска для ature sensors; bit //i// corresponds to temperature input #(//i//+1) of each BMS Logic device; mask 0x1 means that the BMS marks all temperature sensors connected to input #1 of each BMS Logic device as missing and doesn't use them in calculations.
151	151
152	152	(% class="box infomessage" %)
153	153	(((