Wiki source code of 2. Connection
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
1.2 | 1 | = Headers = |
| 2 | |||
| 3 | The BMS Main 2.1 headers are shown in figure below. | ||
| 4 | |||
| 5 | [[The BMS Main 2.1 headers>>image:1731516393377-928.jpeg||height="430" width="428"]] | ||
| 6 | |||
| |
2.2 | 7 | == P1 – header for power supply == |
| 8 | |||
| |
4.2 | 9 | [[image:1731516593096-166.png||data-xwiki-image-style-alignment="center" height="93" width="49"]] |
| |
2.2 | 10 | |
| 11 | |**Pin**|**Name**|**Description** | ||
| 12 | |**1**|**GND**|Ground | ||
| 13 | |**2**|**V+**|Supply voltage 9-30V | ||
| |
4.2 | 14 | |
| 15 | == P15 – header for BMS Logic == | ||
| 16 | |||
| 17 | [[image:1731516577472-301.png||data-xwiki-image-style-alignment="center" height="90" width="83"]] | ||
| 18 | |||
| 19 | |**1**|**RS485_A**|**RS-485 line A for communication with BMS Logic** | ||
| 20 | |**2**|**RS485_B**|RS-485 line B for communication with BMS Logic | ||
| 21 | |**3**|**+5V**|Supply voltage for BMS Logic | ||
| 22 | |**4**|**GND**|Ground |