Skip to Content
Last modified by Admin on 2026/03/11 14:09
From version 72.1
edited by Admin
on 2026/03/11 14:09
Change comment: There is no comment for this version
To version 62.1
edited by Admin
on 2025/03/10 15:20
Change comment: Загрузить новое вложение 1741620022836-867.png

Summary

Details

Page properties
Content
... ... @@ -1,31 +1,15 @@
1 1  (% data-numbered-headings-start="2" style="--numbered-headings-start: 1;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
2 2  = Installation and connection =
3 3  
4 -== Safety rules ==
5 -
6 -To perform the protection functions, the BMS must be able to disconnect the battery from the load and charger. To do this, **at least one contactor** able to break the load and charge circuits must be connected to the BMS.
7 -
8 -Before use, **configure the system**. Proper operation of the BMS is possible only if it is correctly configured.
9 -
10 -(% class="box errormessage" %)
11 -(((
12 -The BMS can be connected to batteries with life-threatening and health-hazardous voltage levels. When working with high-voltage batteries, observe electrical safety regulations, use safety glasses, protective clothing, insulated tools and appliances. To prevent the damage of device avoid electrostatic discharges while working with the battery.
13 -)))
14 -
15 -(% class="box errormessage" %)
16 -(((
17 -The system is not designed to operate with batteries whose total voltage exceeds 1200 V.
18 -)))
19 -
20 20  == Installation procedure ==
21 21  
22 22  Overall and mounting dimensions of the BMS Main 2.1 are shown below.
23 23  
24 -[[image:1752600650898-961.png||data-xwiki-image-style-alignment="center" height="546" width="450"]]
8 +[[image:1732198397369-222.png||data-xwiki-image-style-alignment="center" height="393" width="556"]]
25 25  
26 26  (% style="width:494px" %)
27 27  |**Parameter**|(% style="width:178px" %)**Value**
28 -|Overall dimensions (length × width × height), mm|(% style="width:178px" %)120 × 120 × 17
12 +|Overall dimensions (length × width × height), mm|(% style="width:178px" %)120 × 120 × 32
29 29  |Mounting dimensions (length × width), mm|(% style="width:178px" %)114 × 114
30 30  |Mounting holes|(% style="width:178px" %)M3
31 31  
... ... @@ -81,8 +81,8 @@
81 81  |**Pin**|**Name**|**Description**
82 82  |**1**|**+5V**|Supply voltage for the current sensor 5V, max 50 mA
83 83  |**2**|**GND**|Ground
84 -|**3**|**Vcs**|ADC input 1 (current sensor output)
85 -|**4**|**Vref**|ADC input 2 (current sensor reference signal)
68 +|**3**|**Vcs**|ADC input (current sensor output)
69 +|**4**|**Vref**|ADC input (current sensor reference signal)
86 86  
87 87  === P13 – header for humidity sensor ===
88 88  
... ... @@ -93,8 +93,8 @@
93 93  |**Pin**|**Name**|**Description**
94 94  |**1**|**+5V**|Supply voltage 5 V, max 50 mA
95 95  |**2**|**GND**|Ground
96 -|**3**|**Vts**|ADC input 3 (temperature sensor output)
97 -|**4**|**Vhs**|ADC input 4 (humidity sensor output)
80 +|**3**|**Vhs**|ADC input (humidity sensor output)
81 +|**4**|**Vts**|ADC input (temperature sensor output)
98 98  
99 99  === P8 – header of relay 1 ===
100 100  
1752600650898-961.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -84.9 KB
Content
1752600811993-973.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -84.9 KB
Content