Skip to Content
Last modified by Admin on 2025/07/15 17:33
From version 5.1
edited by Admin
on 2024/11/13 16:51
Change comment: Uploaded new attachment "1731516685999-633.png", version {1}
To version 6.2
edited by Admin
on 2024/11/13 16:56
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -16,7 +16,60 @@
16 16  
17 17  [[image:1731516577472-301.png||data-xwiki-image-style-alignment="center" height="90" width="83"]]
18 18  
19 -|**1**|**RS485_A**|**RS-485 line A for communication with BMS Logic**
19 +|**Pin**|**Name**|**Description**
20 +|**1**|**RS485_A**|RS-485 line A for communication with BMS Logic
20 20  |**2**|**RS485_B**|RS-485 line B for communication with BMS Logic
21 21  |**3**|**+5V**|Supply voltage for BMS Logic
22 22  |**4**|**GND**|Ground
24 +
25 +== P12 – header for current sensor ==
26 +
27 +[[image:1731516685999-633.png||data-xwiki-image-style-alignment="center" height="98" width="90"]]
28 +
29 +|**Pin**|**Name**|**Description**
30 +|**1**|**+5V**|Supply voltage for the current sensor 5V, max 50 mA
31 +|**2**|**GND**|Ground
32 +|**3**|**Vcs**|ADC input (current sensor output)
33 +|**4**|**Vref**|ADC input (current sensor reference signal)
34 +
35 +== P13 – header for humidity sensor ==
36 +
37 +[[image:1731516942455-641.png||data-xwiki-image-style-alignment="center"]]
38 +
39 +|**Pin**|**Name**|**Description**
40 +|**1**|**+5V**|Supply voltage 5 V, max 50 mA
41 +|**2**|**GND**|Ground
42 +|**3**|**Vhs**|ADC input (humidity sensor output)
43 +|**4**|**Vts**|ADC input (temperature sensor output)
44 +
45 +
46 +1.
47 +11.
48 +111. P8 – header of relay 1
49 +
50 +[[image:file:///C:/Users/INASIB~~1/AppData/Local/Temp/msohtmlclip1/01/clip_image001.emz]]
51 +
52 +By default, relay 1 is used to control the discharging contactor.
53 +
54 +
55 +|**Pin**|**Name**|**Description**
56 +|**1**|**V+**|Switching voltage (up to 55V, max 2A)
57 +|**2**|**NO**|Normally open contact
58 +
59 +
60 +1.
61 +11.
62 +111. P9 – header of relay 2
63 +
64 +[[image:file:///C:/Users/INASIB~~1/AppData/Local/Temp/msohtmlclip1/01/clip_image001.emz]]
65 +
66 +By default, relay 2 is used to output the “Allow charging” signal.
67 +
68 +
69 +|**Pin**|**Name**|**Description**
70 +|**1**|**V+**|Switching voltage (up to 55V, max 2A)
71 +|**2**|**NO**|Normally open contact
72 +
73 +
74 +
75 +
1731516942455-641.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +1.5 KB
Content