Skip to Content
Last modified by Admin on 2025/07/15 17:33
From version 21.4
edited by Admin
on 2024/11/19 07:57
Change comment: There is no comment for this version
To version 69.1
edited by Admin
on 2025/07/15 17:31
Change comment: There is no comment for this version

Summary

Details

Page properties
Title
... ... @@ -1,1 +1,1 @@
1 -2. Connection procedure
1 +2. Installation and connection
Parent
... ... @@ -1,1 +1,1 @@
1 -Controllers.BMS Main 2\.1.WebHome
1 +Battery management systems.BMS Main 2\.1.WebHome
Content
... ... @@ -1,3 +1,36 @@
1 +(% data-numbered-headings-start="2" style="--numbered-headings-start: 1;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
2 += Installation and connection =
3 +
4 +== Safety rules ==
5 +
6 +To perform the protection functions, the BMS must be able to disconnect the battery from the load and charger. To do this, **at least one contactor** able to break the load and charge circuits must be connected to the BMS.
7 +
8 +Before use, **configure the system**. Proper operation of the BMS is possible only if it is correctly configured.
9 +
10 +(% class="box errormessage" %)
11 +(((
12 +The BMS can be connected to batteries with life-threatening and health-hazardous voltage levels. When working with high-voltage batteries, observe electrical safety regulations, use safety glasses, protective clothing, insulated tools and appliances. To prevent the damage of device avoid electrostatic discharges while working with the battery.
13 +)))
14 +
15 +(% class="box errormessage" %)
16 +(((
17 +The system is not designed to operate with batteries whose total voltage exceeds 1200 V.
18 +)))
19 +
20 +== Installation procedure ==
21 +
22 +Overall and mounting dimensions of the BMS Main 2.1 are shown below.
23 +
24 +[[image:1752600650898-961.png||data-xwiki-image-style-alignment="center" height="546" width="450"]]
25 +
26 +(% style="width:494px" %)
27 +|**Parameter**|(% style="width:178px" %)**Value**
28 +|Overall dimensions (length × width × height), mm|(% style="width:178px" %)120 × 120 × 17
29 +|Mounting dimensions (length × width), mm|(% style="width:178px" %)114 × 114
30 +|Mounting holes|(% style="width:178px" %)M3
31 +
32 +== Connection procedure ==
33 +
1 1  The mounting area of the BMS Main 2.1 must be protected from mechanical particles (dust, dirt, large objects) and water. The installation site must provide convenient access for subsequent connection to the device’s headers.
2 2  
3 3  1. Connect the charging and discharging contactors to the P6-P9 headers.
... ... @@ -5,202 +5,221 @@
5 5  1. Connect the BMS Main 2.1 to the on-board CAN network. Observe the rules for connecting CAN devices. If the BMS Main 2.1 is the last device on a bus, close pins 1-2 on the P21 jumper, otherwise leave the jumper on pins 2-3.
6 6  1. Connect a power supply to the P1 header. It is not recommended to power the BMS Main 2.1 from the battery only, since at a critical discharge of the battery, it is not possible to turn on the BMS and close the charging contactor.
7 7  
8 -= ​​​​Headers description =
41 +== ​​​​Headers description ==
9 9  
10 10  The BMS Main 2.1 headers are shown in figure below.
11 11  
12 -[[The BMS Main 2.1 headers>>image:1731517946345-632.png||height="417" width="451"]]
45 +[[image:1731516393377-928.jpeg||alt="1731517946345-632.png" data-xwiki-image-style-alignment="center" height="417" width="451"]]
13 13  
14 -(% class="wikigeneratedid" %)
15 -Following chapters describes the BMS Main 2.1 headers pinout.
47 +(% class="box warningmessage" %)
48 +(((
49 +**Attention!**
50 +All headers are shown from the device side!
51 +)))
16 16  
17 17  === P1 – header for power supply ===
18 18  
19 -[[image:1731516593096-166.png||data-xwiki-image-style-alignment="center"]]
55 +Receptacle Housing: Molex 39012020. Terminals: Molex 5556
20 20  
21 -(% style="width:339px" %)
22 -|(% style="width:71px" %)**Pin**|(% style="width:91px" %)**Name**|(% style="width:174px" %)**Description**
23 -|(% style="width:71px" %)**1**|(% style="width:91px" %)**GND**|(% style="width:174px" %)Ground
24 -|(% style="width:71px" %)**2**|(% style="width:91px" %)**V+**|(% style="width:174px" %)Supply voltage 9-30V
57 +[[image:1732198827034-560.png||data-xwiki-image-style-alignment="center" height="78" width="41"]]
25 25  
59 +|**Pin**|**Name**|**Description**
60 +|**1**|**GND**|Ground
61 +|**2**|**V+**|Supply voltage 9-30V
62 +
26 26  === P15 – header for BMS Logic ===
27 27  
28 -[[image:1731516577472-301.png||data-xwiki-image-style-alignment="center"]]
65 +Receptacle Housing: Molex 430250400. Terminals: Molex 43030
29 29  
30 -(% style="width:524px" %)
31 -|(% style="width:69px" %)**Pin**|(% style="width:97px" %)**Name**|(% style="width:355px" %)**Description**
32 -|(% style="width:69px" %)**1**|(% style="width:97px" %)**RS485_A**|(% style="width:355px" %)RS-485 line A for communication with BMS Logic
33 -|(% style="width:69px" %)**2**|(% style="width:97px" %)**RS485_B**|(% style="width:355px" %)RS-485 line B for communication with BMS Logic
34 -|(% style="width:69px" %)**3**|(% style="width:97px" %)**+5V**|(% style="width:355px" %)Supply voltage for BMS Logic
35 -|(% style="width:69px" %)**4**|(% style="width:97px" %)**GND**|(% style="width:355px" %)Ground
67 +[[image:1732198890482-787.png||data-xwiki-image-style-alignment="center" height="77" width="71"]]
36 36  
69 +|**Pin**|**Name**|**Description**
70 +|**1**|**RS485_A**|RS-485 line A for communication with BMS Logic
71 +|**2**|**RS485_B**|RS-485 line B for communication with BMS Logic
72 +|**3**|**+5V**|Supply voltage for BMS Logic
73 +|**4**|**GND**|Ground
74 +
37 37  === P12 – header for current sensor ===
38 38  
39 -[[image:1731516685999-633.png||data-xwiki-image-style-alignment="center"]]
77 +Receptacle Housing: Molex 430250400. Terminals: Molex 43030
40 40  
41 -(% style="width:531px" %)
42 -|(% style="width:75px" %)**Pin**|(% style="width:93px" %)**Name**|(% style="width:360px" %)**Description**
43 -|(% style="width:75px" %)**1**|(% style="width:93px" %)**+5V**|(% style="width:360px" %)Supply voltage for the current sensor 5V, max 50 mA
44 -|(% style="width:75px" %)**2**|(% style="width:93px" %)**GND**|(% style="width:360px" %)Ground
45 -|(% style="width:75px" %)**3**|(% style="width:93px" %)**Vcs**|(% style="width:360px" %)ADC input (current sensor output)
46 -|(% style="width:75px" %)**4**|(% style="width:93px" %)**Vref**|(% style="width:360px" %)ADC input (current sensor reference signal)
79 +[[image:1732198890482-787.png||data-xwiki-image-style-alignment="center" height="77" width="71"]]
47 47  
81 +|**Pin**|**Name**|**Description**
82 +|**1**|**+5V**|Supply voltage for the current sensor 5V, max 50 mA
83 +|**2**|**GND**|Ground
84 +|**3**|**Vcs**|ADC input (current sensor output)
85 +|**4**|**Vref**|ADC input (current sensor reference signal)
86 +
48 48  === P13 – header for humidity sensor ===
49 49  
50 -[[image:1731516942455-641.png||data-xwiki-image-style-alignment="center"]]
89 +Receptacle Housing: Molex 430250400. Terminals: Molex 43030
51 51  
52 -(% style="width:531px" %)
53 -|(% style="width:77px" %)**Pin**|(% style="width:92px" %)**Name**|(% style="width:359px" %)**Description**
54 -|(% style="width:77px" %)**1**|(% style="width:92px" %)**+5V**|(% style="width:359px" %)Supply voltage 5 V, max 50 mA
55 -|(% style="width:77px" %)**2**|(% style="width:92px" %)**GND**|(% style="width:359px" %)Ground
56 -|(% style="width:77px" %)**3**|(% style="width:92px" %)**Vhs**|(% style="width:359px" %)ADC input (humidity sensor output)
57 -|(% style="width:77px" %)**4**|(% style="width:92px" %)**Vts**|(% style="width:359px" %)ADC input (temperature sensor output)
91 +[[image:1732198896526-660.png||data-xwiki-image-style-alignment="center" height="70" width="64"]]
58 58  
93 +|**Pin**|**Name**|**Description**
94 +|**1**|**+5V**|Supply voltage 5 V, max 50 mA
95 +|**2**|**GND**|Ground
96 +|**3**|**Vhs**|ADC input (humidity sensor output)
97 +|**4**|**Vts**|ADC input (temperature sensor output)
98 +
59 59  === P8 – header of relay 1 ===
60 60  
61 -[[image:1731517023208-641.png||data-xwiki-image-style-alignment="center"]]
101 +Receptacle Housing: Molex 39012020. Terminals: Molex 5556
62 62  
103 +[[image:1732198827034-560.png||data-xwiki-image-style-alignment="center" height="78" width="41"]]
104 +
63 63  By default, relay 1 is used to control the discharging contactor.
64 64  
65 -(% style="width:527px" %)
66 -|(% style="width:82px" %)**Pin**|(% style="width:91px" %)**Name**|(% style="width:351px" %)**Description**
67 -|(% style="width:82px" %)**1**|(% style="width:91px" %)**V+**|(% style="width:351px" %)Switching voltage (up to 55V, max 2A)
68 -|(% style="width:82px" %)**2**|(% style="width:91px" %)**NO**|(% style="width:351px" %)Normally open contact
107 +|**Pin**|**Name**|**Description**
108 +|**1**|**V+**|Switching voltage (up to 55V, max 3A)
109 +|**2**|**NO**|Normally open contact
69 69  
111 +Contactor connection example for all relays:
112 +
113 +[[image:1741619814065-850.png||height="189" width="252"]]
114 +
70 70  === P9 – header of relay 2 ===
71 71  
72 -[[image:1731517025702-799.png||data-xwiki-image-style-alignment="center"]]
117 +Receptacle Housing: Molex 39012020. Terminals: Molex 5556
73 73  
119 +[[image:1732198827034-560.png||data-xwiki-image-style-alignment="center" height="78" width="41"]]
120 +
74 74  By default, relay 2 is used to output the “Allow charging” signal.
75 75  
76 -(% style="width:524px" %)
77 -|(% style="width:89px" %)**Pin**|(% style="width:91px" %)**Name**|(% style="width:341px" %)**Description**
78 -|(% style="width:89px" %)**1**|(% style="width:91px" %)**V+**|(% style="width:341px" %)Switching voltage (up to 55V, max 2A)
79 -|(% style="width:89px" %)**2**|(% style="width:91px" %)**NO**|(% style="width:341px" %)Normally open contact
123 +|**Pin**|**Name**|**Description**
124 +|**1**|**V+**|Switching voltage (up to 55V, max 3A)
125 +|**2**|**NO**|Normally open contact
80 80  
127 +Contactor connection example: see relay 1.
128 +
81 81  === P6 – header of relay 3 ===
82 82  
83 -[[image:1731517025702-799.png||data-xwiki-image-style-alignment="center"]]
131 +Receptacle Housing: Molex 39012020. Terminals: Molex 5556
84 84  
133 +[[image:1732198827034-560.png||data-xwiki-image-style-alignment="center" height="78" width="41"]]
134 +
85 85  By default, relay 3 is used to control the charging contactor.
86 86  
87 -(% style="width:524px" %)
88 -|(% style="width:101px" %)**Pin**|(% style="width:88px" %)**Name**|(% style="width:332px" %)**Description**
89 -|(% style="width:101px" %)**1**|(% style="width:88px" %)**V+**|(% style="width:332px" %)Switching voltage (up to 55V, max 8A)
90 -|(% style="width:101px" %)**2**|(% style="width:88px" %)**NO**|(% style="width:332px" %)Normally open contact
137 +|**Pin**|**Name**|**Description**
138 +|**1**|**V+**|Switching voltage up to 55V,
139 +up to 8A (board rev. 2.1b), up to 3A (board rev. 2.1c)
140 +|**2**|**NO**|Normally open contact
91 91  
142 +Contactor connection example: see relay 1.
143 +
92 92  === P7 – header of relay 4 ===
93 93  
94 -[[image:1731517025702-799.png||data-xwiki-image-style-alignment="center"]]
146 +Receptacle Housing: Molex 39012020. Terminals: Molex 5556
95 95  
148 +[[image:1732198827034-560.png||data-xwiki-image-style-alignment="center" height="78" width="41"]]
149 +
96 96  By default, relay 4 is used to control the heater.
97 97  
98 -(% style="width:530px" %)
99 -|(% style="width:102px" %)**Pin**|(% style="width:93px" %)**Name**|(% style="width:332px" %)**Description**
100 -|(% style="width:102px" %)**1**|(% style="width:93px" %)**V+**|(% style="width:332px" %)Switching voltage (up to 55V, max 8A)
101 -|(% style="width:102px" %)**2**|(% style="width:93px" %)**NO**|(% style="width:332px" %)Normally open contact
152 +|**Pin**|**Name**|**Description**
153 +|**1**|**V+**|Switching voltage up to 55V,
154 +up to 8A (board rev. 2.1b), up to 3A (board rev. 2.1c)
155 +|**2**|**NO**|Normally open contact
102 102  
157 +Contactor connection example: see relay 1.
158 +
103 103  === P14 – header for CAN and RS-485 interfaces ===
104 104  
105 -[[image:1731517180930-597.png||data-xwiki-image-style-alignment="center"]]
161 +Receptacle Housing: Molex 430250600. Terminals: Molex 43030
106 106  
163 +[[image:1731517180930-597.png||data-xwiki-image-style-alignment="center" height="81" width="113"]]
164 +
107 107  (% style="width:641px" %)
108 -|(% style="width:107px" %)**Pin**|(% style="width:127px" %)**Name**|(% style="width:404px" %)**Description**
109 -|(% style="width:107px" %)**1**|(% style="width:127px" %)**EXT_RS485_A**|(% style="width:404px" %)RS-485 line A for communication with external equipment
110 -|(% style="width:107px" %)**2**|(% style="width:127px" %)**CAN_H**|(% style="width:404px" %)CAN H line for communication with external equipment
111 -|(% style="width:107px" %)**3**|(% style="width:127px" %)**+5V_CAN**|(% style="width:404px" %)Supply voltage 5V for external devices, max 200 mA
112 -|(% style="width:107px" %)**4**|(% style="width:127px" %)**EXT_RS485_B**|(% style="width:404px" %)RS-485 line B for communication with external equipment
113 -|(% style="width:107px" %)**5**|(% style="width:127px" %)**CAN_L**|(% style="width:404px" %)CAN L line for communication with external equipment
114 -|(% style="width:107px" %)**6**|(% style="width:127px" %)**GND_CAN**|(% style="width:404px" %)Ground
166 +|**Pin**|**Name**|**Description**
167 +|**1**|**EXT_RS485_A**|RS-485 line A for communication with external equipment
168 +|**2**|**CAN_H**|CAN H line for communication with external equipment
169 +|**3**|**+5V_CAN**|Supply voltage 5V for external devices, max 200 mA
170 +|**4**|**EXT_RS485_B**|RS-485 line B for communication with external equipment
171 +|**5**|**CAN_L**|CAN L line for communication with external equipment
172 +|**6**|**GND_CAN**|Ground
115 115  
116 116  === P21 – CAN termination resistor jumper ===
117 117  
118 -[[image:1731517188900-976.png||data-xwiki-image-style-alignment="center"]]
176 +[[image:1731517188900-976.png||data-xwiki-image-style-alignment="center" height="78" width="149"]]
119 119  
120 120  To connect the termination resistor between the lines **CAN_H** and **CAN_L**, install a jumper, according to the P21 pinout:
121 121  
122 -(% style="width:643px" %)
123 -|**Pin**|(% style="width:122px" %)**Name**|(% style="width:400px" %)**Description**
124 -|**1-2**|(% style="width:122px" %)**120 Ohm**|(% style="width:400px" %)Termination resistor 120 Ohm is connected
125 -|**2-3**|(% style="width:122px" %)**-**|(% style="width:400px" %)Termination resistor 120 Ohm is not connected
180 +|**Pin**|**Name**|**Description**
181 +|**1-2**|**120 Ohm**|Termination resistor 120 Ohm is connected
182 +|**2-3**|**-**|Termination resistor 120 Ohm is not connected
126 126  
127 127  === P22 - RS-485 termination resistor jumper ===
128 128  
129 -[[image:1731517195672-298.png||data-xwiki-image-style-alignment="center"]]
186 +[[image:1731517195672-298.png||data-xwiki-image-style-alignment="center" height="81" width="155"]]
130 130  
131 131  To connect the termination resistor between the **EXT_RS485_A** and **EXT_RS485_B** lines, install a jumper according to the P22 pinout:
132 132  
133 -(% style="width:644px" %)
134 -|**Pin**|(% style="width:121px" %)**Name**|(% style="width:402px" %)**Description**
135 -|**1-2**|(% style="width:121px" %)**120 Ohm**|(% style="width:402px" %)Terminating resistor 120 Ohm is connected
136 -|**2-3**|(% style="width:121px" %)**-**|(% style="width:402px" %)Terminating resistor 120 Ohm is not connected
190 +|**Pin**|**Name**|**Description**
191 +|**1-2**|**120 Ohm**|Terminating resistor 120 Ohm is connected
192 +|**2-3**|**-**|Terminating resistor 120 Ohm is not connected
137 137  
138 138  === P11 – header for discrete inputs/outputs ===
139 139  
140 -[[image:1731517206246-979.png||data-xwiki-image-style-alignment="center"]]
196 +Receptacle Housing: Molex 430251600. Terminals: Molex 43030
141 141  
142 -(% style="width:584px" %)
143 -|(% style="width:98px" %)**Pin**|(% style="width:157px" %)**Name**|(% style="width:326px" %)**Description**
144 -|(% style="width:98px" %)**16**|(% style="width:157px" %)**IN_1**|(% style="width:326px" %)Discrete input #1 “dry contact” (+5V)
145 -|(% style="width:98px" %)**8**|(% style="width:157px" %)**GND_1**|(% style="width:326px" %)Discrete input #1 “dry contact” (ground)
146 -|(% style="width:98px" %)**15**|(% style="width:157px" %)**IN_2**|(% style="width:326px" %)Discrete input #2 “dry contact” (+5V)
147 -|(% style="width:98px" %)**7**|(% style="width:157px" %)**GND_2**|(% style="width:326px" %)Discrete input #2 “dry contact” (ground)
148 -|(% style="width:98px" %)**14**|(% style="width:157px" %)**IN_3**|(% style="width:326px" %)Discrete input #3 “dry contact” (+5V)
149 -|(% style="width:98px" %)**6**|(% style="width:157px" %)**GND_3**|(% style="width:326px" %)Discrete input #3 “dry contact” (ground)
150 -|(% style="width:98px" %)**13**|(% style="width:157px" %)**IN_4**|(% style="width:326px" %)Discrete input #4 “dry contact” (+5V)
151 -|(% style="width:98px" %)**5**|(% style="width:157px" %)**GND_4**|(% style="width:326px" %)Discrete input #4 “dry contact” (ground)
152 -|(% style="width:98px" %)**12**|(% style="width:157px" %)**OUT_4**|(% style="width:326px" %)Discrete output #4 (+5V, 20mA)
153 -|(% style="width:98px" %)**4**|(% style="width:157px" %)**GND_OUT_4**|(% style="width:326px" %)Discrete output #4 (ground)
154 -|(% style="width:98px" %)**11**|(% style="width:157px" %)**OUT_3**|(% style="width:326px" %)Discrete output #3 (+5V, 20mA)
155 -|(% style="width:98px" %)**3**|(% style="width:157px" %)**GND_OUT_3**|(% style="width:326px" %)Discrete output #3 (ground)
156 -|(% style="width:98px" %)**10**|(% style="width:157px" %)**OUT_2**|(% style="width:326px" %)Discrete output #2 (+5V, 20mA)
157 -|(% style="width:98px" %)**2**|(% style="width:157px" %)**GND_OUT_2**|(% style="width:326px" %)Discrete output #2 (ground)
158 -|(% style="width:98px" %)**9**|(% style="width:157px" %)**OUT_1**|(% style="width:326px" %)Discrete output #1 (+5V, 20mA)
159 -|(% style="width:98px" %)**1**|(% style="width:157px" %)**GND_OUT_1**|(% style="width:326px" %)Discrete output #1 (ground)
198 +[[image:1732198937514-731.png||data-xwiki-image-style-alignment="center" height="85" width="272"]]
160 160  
161 -= Indicators =
200 +|**Pin**|**Name**|**Description**
201 +|**16**|**IN_1**|Discrete input #1 “dry contact” (+5V)
202 +|**8**|**GND_1**|Discrete input #1 “dry contact” (ground)
203 +|**15**|**IN_2**|Discrete input #2 “dry contact” (+5V)
204 +|**7**|**GND_2**|Discrete input #2 “dry contact” (ground)
205 +|**14**|**IN_3**|Discrete input #3 “dry contact” (+5V)
206 +|**6**|**GND_3**|Discrete input #3 “dry contact” (ground)
207 +|**13**|**IN_4**|Discrete input #4 “dry contact” (+5V)
208 +|**5**|**GND_4**|Discrete input #4 “dry contact” (ground)
209 +|**12**|**OUT_4**|Discrete output #4 (+5V, 20mA)
210 +|**4**|**GND_OUT_4**|Discrete output #4 (ground)
211 +|**11**|**OUT_3**|Discrete output #3 (+5V, 20mA)
212 +|**3**|**GND_OUT_3**|Discrete output #3 (ground)
213 +|**10**|**OUT_2**|Discrete output #2 (+5V, 20mA)
214 +|**2**|**GND_OUT_2**|Discrete output #2 (ground)
215 +|**9**|**OUT_1**|Discrete output #1 (+5V, 20mA)
216 +|**1**|**GND_OUT_1**|Discrete output #1 (ground)
162 162  
218 +== Indicators ==
219 +
163 163  === DS1 – power indicator ===
164 164  
165 -(% style="width:442px" %)
166 -|(% style="width:138px" %)**State**|(% style="width:301px" %)**Description**
167 -|(% style="width:138px" %)**Lights red**|(% style="width:301px" %)The device is powered
168 -|(% style="width:138px" %)**Off**|(% style="width:301px" %)The device is not powered
222 +|**State**|**Description**
223 +|**Lights red**|The device is powered
224 +|**Off**|The device is not powered
169 169  
170 170  === DS2 – operation indicator ===
171 171  
172 -(% style="width:442px" %)
173 -|(% style="width:137px" %)**State**|(% style="width:302px" %)**Description**
174 -|(% style="width:137px" %)**Blinking green**|(% style="width:302px" %)The BMS firmware is running
175 -|(% style="width:137px" %)**Off**|(% style="width:302px" %)The BMS firmware is not running
228 +|**State**|**Description**
229 +|**Blinking green**|The BMS firmware is running
230 +|**Off**|The BMS firmware is not running
176 176  
177 177  === DS3 – communication indicator ===
178 178  
179 -(% style="width:539px" %)
180 -|(% style="width:175px" %)**State**|(% style="width:361px" %)**Description**
181 -|(% style="width:175px" %)**Blinking yellow (2Hz)**|(% style="width:361px" %)Initializing communication with BMS Logic boards
182 -|(% style="width:175px" %)**Blinking yellow (25Hz)**|(% style="width:361px" %)Communication with BMS Logic is established
234 +|**State**|**Description**
235 +|**Blinking yellow (2Hz)**|Initializing communication with BMS Logic boards
236 +|**Blinking yellow (25Hz)**|Communication with BMS Logic is established
183 183  
184 184  === DS4 – error indicator ===
185 185  
186 -(% style="width:539px" %)
187 -|(% style="width:176px" %)**State**|(% style="width:360px" %)**Description**
188 -|(% style="width:176px" %)**Blinking red**|(% style="width:360px" %)Errors in communication with BMS Logic
189 189  
241 +|(**State**|**Description**
242 +|(**Blinking red**|Errors in communication with BMS Logic
243 +
190 190  === DS7 – relay 1 indicator ===
191 191  
192 -(% style="width:541px" %)
193 -|(% style="width:179px" %)**State**|(% style="width:359px" %)**Description**
194 -|(% style="width:179px" %)**Lights green**|(% style="width:359px" %)Relay #1 is closed
195 -|(% style="width:179px" %)**Off**|(% style="width:359px" %)Relay #1 is opened
246 +|**State**|**Description**
247 +|**Lights green**|Relay #1 is closed
248 +|**Off**|Relay #1 is opened
196 196  
197 197  === DS8 – relay 2 indicator ===
198 198  
252 +|**State**|**Description**
253 +|**Lights green**|Relay #2 is closed
254 +|**Off**|Relay #2 is opened
199 199  
200 -|(% style="width:180px" %)**State**|(% style="width:1342px" %)**Description**
201 -|(% style="width:180px" %)**Lights green**|(% style="width:1342px" %)Relay #2 is closed
202 -|(% style="width:180px" %)**Off**|(% style="width:1342px" %)Relay #2 is opened
203 -
204 204  === DS5 – relay 3 indicator ===
205 205  
206 206  |**State**|**Description**
1731516474613-418.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -981 bytes
Content
1731516577472-301.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -1.5 KB
Content
1731516593096-166.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -981 bytes
Content
1731516685999-633.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -1.5 KB
Content
1731516942455-641.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -1.5 KB
Content
1731517023208-641.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -981 bytes
Content
1731517025702-799.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -981 bytes
Content
1731517206246-979.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -4.2 KB
Content
1731517946345-632.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.admin
Size
... ... @@ -1,1 +1,0 @@
1 -107.3 KB
Content
1732198397369-222.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +81.3 KB
Content
1732198827034-560.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +1.1 KB
Content
1732198890482-787.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 KB
Content
1732198896526-660.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +2.0 KB
Content
1732198937514-731.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +7.1 KB
Content
1741619628288-759.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
1741619637854-961.jpg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +29.2 KB
Content
1741619700532-367.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +14.1 KB
Content
1741619814065-850.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +15.1 KB
Content
1741620022836-867.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +13.3 KB
Content
1752600650898-961.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +84.9 KB
Content