Wiki source code of 1. General information
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
13.1 | 1 | This document describes configuration procedure of BMS Main 2.x board. Configuring can be done using the web interface available via Ethernet or Wi-Fi. |
| 2 | |||
| 3 | Default connection settings for Ethernet are: | ||
| 4 | |||
| 5 | * IP address – 192.168.0.100 | ||
| 6 | * Network Mask – 255.255.0.0 | ||
| 7 | * Default gateway – 192.168.0.1 | ||
| 8 | |||
| 9 | (% class="box infomessage" %) | ||
| 10 | ((( | ||
| 11 | **Note** | ||
| 12 | To connect via Ethernet, the computer`s network adapter through which the BMS Main 2.x is configured must be in the same subnet as the target board. | ||
| 13 | ))) | ||
| 14 | |||
| 15 | To connect via Wi-Fi use the IP address which an access point gave to the board (see Wi-Fi for configuring the connection and the “System → Overview” section to find out the IP address). | ||
| 16 | |||
| 17 | Default credentials for changing board settings using the web interface are: | ||
| 18 | |||
| 19 | * Login – user | ||
| 20 | * Password – bms | ||
| 21 | |||
| 22 | To access the web interface, enter the IP address of the board (192.168.0.100 by default) in the address bar of the browser. | ||
| 23 | |||
| 24 | |||
| 25 |