Skip to Content
Last modified by Admin on 2025/03/18 13:04
From version 1.1
edited by Admin
on 2024/12/02 14:40
Change comment: There is no comment for this version
To version 5.1
edited by Admin
on 2024/12/02 16:37
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -11,7 +11,7 @@
11 11  [[image:1733150108388-179.png||data-xwiki-image-style-alignment="center" height="384" width="555"]]
12 12  
13 13  |**Parameter**|**Value**
14 -| (((
14 +|(((
15 15  Overall dimensions (length × width × height), mm
16 16  )))|214 × 140 × 16
17 17  |Mounting dimensions (length × width), mm|198 × 132
... ... @@ -20,14 +20,6 @@
20 20  
21 21  == (% style="color:#333333" %)2.2 (%%)Headers ==
22 22  
23 -
24 -
25 -
26 -
27 -
28 -
29 -== ==
30 -
31 31  The BMS Logic 18 is designed to measure temperature and voltage of 18 battery cells.
32 32  
33 33  [[image:1733150257403-684.png||data-xwiki-image-style-alignment="center" height="376" width="640"]]
... ... @@ -34,7 +34,7 @@
34 34  
35 35  === 2.2.1 X1 – header for cells ===
36 36  
37 -[[image:1733150257406-647.jpeg||data-xwiki-image-style-alignment="center" height="76" width="268"]]
29 +[[image:1733150257406-647.jpeg||data-xwiki-image-style-alignment="center" height="73" width="256"]]
38 38  
39 39  |**Pin**|**Name**|**Description**
40 40  |**1**|**V-**|Minus of the cell stack
... ... @@ -58,9 +58,9 @@
58 58  |**19**|**C15**|Cell #15
59 59  |**20**|**C17**|Cell #17
60 60  
61 -=== X2 – header 1 for temperature sensors ===
53 +=== 2.2.2 X2 – header 1 for temperature sensors ===
62 62  
63 -[[image:1733150257408-172.jpeg||data-xwiki-image-style-alignment="center"]]
55 +[[image:1733150257408-172.jpeg||data-xwiki-image-style-alignment="center" height="81" width="267"]]
64 64  
65 65  |**Pin**|**Name**|**Description**
66 66  |**1**|**TEMPG9**|Ground of the thermistor #9
... ... @@ -82,14 +82,10 @@
82 82  |**17**|**TEMP2**|Signal from the thermistor #2
83 83  |**18**|**TEMP1**|Signal from the thermistor #1
84 84  
77 +== 2.2.3 X3 – header 2 for temperature sensors ==
85 85  
86 -1.
87 -11.
88 -111. X3 – header 2 for temperature sensors
79 +[[image:1733150257410-796.jpeg||data-xwiki-image-style-alignment="center" height="81" width="268"]]
89 89  
90 -
91 -[[image:1733150257410-796.jpeg]]
92 -
93 93  |**Pin**|**Name**|**Description**
94 94  |**1**|**TEMPG18**|Ground of the thermistor #18
95 95  |**2**|**TEMPG17**|Ground of the thermistor #17
... ... @@ -110,13 +110,10 @@
110 110  |**17**|**TEMP11**|Signal from the thermistor #11
111 111  |**18**|**TEMP10**|Signal from the thermistor #10
112 112  
101 +=== 2.3.4 X4, X5 – headers for communication with BMS Main ===
113 113  
114 -1.
115 -11.
116 -111. X4, X5 – headers for communication with BMS Main
103 +[[image:1733150513230-598.png||data-xwiki-image-style-alignment="center" height="89" width="81"]]
117 117  
118 -[[image:file:///C:/Users/INASIB~~1/AppData/Local/Temp/msohtmlclip1/01/clip_image005.emz]]
119 -
120 120  |**Pin**|**Name**|**Description**
121 121  |**1**|**RS485_A**|RS-485 line A for communication with the BMS Main
122 122  |**2**|**RS485_B**|RS-485 line B for communication with the BMS Main
... ... @@ -123,10 +123,9 @@
123 123  |**3**|**+5V**|Supply voltage 5V
124 124  |**4**|**GND**|Ground
125 125  
111 +== 2.4 Switches and Indicators ==
126 126  
127 -1.
128 -11.
129 -111. SWD1 – address switch
113 +=== 2.4.1 SWD1 – address switch ===
130 130  
131 131  |**Switch number**|**Description**
132 132  |**1**|The first (the lowest) bit of the address. Position ON - bit is 1
... ... @@ -135,27 +135,61 @@
135 135  |**4**|The fourth bit of the address. Position ON - bit is 1
136 136  |**5**|The fifth (the highest) bit of the address. Position ON - bit is 1
137 137  
122 +(% class="box infomessage" %)
123 +(((
124 +**Note: **There is no SWD1 switch in the recent revisions of the BMS Logic 18. The device address must be configured in the settings (see the section [[3. Configuration>>doc:drafts.BMS Logic 18.3\. Configuration.WebHome]]).
125 +)))
138 138  
139 -**Note – There is no SWD1 switch in the recent revisions of the BMS Logic 18. The device address must be configured in the settings **(see the section 4.2 Configuration procedure).
127 +=== 2.4.2 SWD2 – RS-485 termination resistor switch ===
140 140  
129 +To connect the termination resistor between the **RS485_A** and **RS485_B** lines, switch SWD2 to the ON position.
141 141  
142 -1.
143 -11.
144 -111. SWD2 – RS-485 termination resistor switch
131 +(% class="box infomessage" %)
132 +(((
133 +**Note: **There is no SWD2 switch in the recent revisions of the BMS Logic 18. Connect a 120 Ohm termination resistor directly to the X5 connector between the lines RS485_A and RS485_B.
134 +)))
145 145  
146 -To connect the termination resistor between the **RS485_A** and **RS485_B** lines, switch SWD2 to the ON position.
136 +=== 2.4.3 DS1 – mode indicator ===
147 147  
138 +(% style="width:551px" %)
139 +|(% style="width:188px" %)**State**|(% style="width:362px" %)**Description**
140 +|(% style="width:188px" %)**Blinking**|(% style="width:362px" %)Connection between the BMS Main and the device is established
141 +|(% style="width:188px" %)**Short flashing (~~50 milliseconds in a second)**|(% style="width:362px" %)The device is measuring voltage and temperature. No communication between the BMS Main and the device
142 +|(% style="width:188px" %)**Long flashing (1 second in a 2 second period)**|(% style="width:362px" %)The device is in the bootloader mode
148 148  
149 -**Note – There is no SWD2 switch in the recent revisions of the BMS Logic 18. Connect a 120 Ohm termination resistor directly to the X5 connector between the lines RS485_A and RS485_B.**
144 +== 2.5 Connection procedure ==
150 150  
146 +=== 2.5.1 Connection to BMS Main ===
151 151  
152 -1.
153 -11.
154 -111. DS1 – mode indicator
148 +To connect the BMS Main to BMS Logic 18 do the following steps:
155 155  
156 -|**State**|**Description**
157 -|**Blinking**|Connection between the BMS Main and the device is established
158 -|**Short flashing (~~50 milliseconds in a second)**|The device is measuring voltage and temperature. No communication between the BMS Main and the device
159 -|**Long flashing (1 second in a 2 second period)**|The device is in the bootloader mode
150 +1. Connect the BMS Main to the first BMS Logic 18 (P15 -> X4);
151 +1. Connect the BMS Logic 18 to each other (X5 -> X4);
152 +1. Switch SWD2 on the last BMS Logic 18 to the ON position or connect a 120 Ohm termination resistor directly to the X5 connector of the last BMS Logic 18.
160 160  
161 -
154 +(% class="box infomessage" %)
155 +(((
156 +**Recommendations:**
157 +~1. The total cable length (the sum of the lengths of all cables) between the BMS Main and the last BMS Logic 18 should not exceed 500 meters.
158 +2. Make all connections with the same cable.
159 +3. For a total cable length of more than 10 meters use twisted pair with the 120 Ohm wave impedance.
160 +)))
161 +
162 +=== 2.5.2 Connecting battery cells ===
163 +
164 +To connect the battery cells, follow figure below. Incorrect connection of the cells can damage the BMS Logic 18.
165 +
166 +Begin the connection with the negative of the battery: the "V-" of the first BMS Logic 18 is connected to "B-", then the first cell (C1) of the battery is connected, then the second (C2), etc. The “V-“ of the next BMS Logic 18 is connected to the C18 of the previous BMS Logic 18. If not all inputs of the cells are used, then the remaining inputs are connected to the cell with the most potential.
167 +
168 +
169 +[[image:1733151263524-832.jpeg||data-xwiki-image-style-alignment="center" height="492" width="612"]]
170 +
171 +(% class="box warningmessage" %)
172 +(((
173 +**Attention!**
174 +Connect the battery according to the diagram, otherwise the device may be damaged!
175 +)))
176 +
177 +=== 2.5.3 Connecting thermistors ===
178 +
179 +Thermistors should be fastened to the cells, excluding short circuits to the cell terminals (for example, isolate thermistors with heat shrink). For reliable operation, it is recommended to use all thermistors (a temperature sensor per cell).
1733150486376-819.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +1.5 KB
Content
1733150513230-598.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +1.7 KB
Content
1733151263524-832.jpeg
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +114.2 KB
Content