Wiki source code of BMS LANmodule
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
9.3 | 1 | = Общая информация = |
| |
1.1 | 2 | |
| 3 | [[image:1734099407734-687.png||data-xwiki-image-style-alignment="center" height="167" width="300"]] | ||
| 4 | |||
| |
9.3 | 5 | BMS LANmodule представляет собой модуль расширения, который устанавливается в контроллеры BMS Mini, BMS Mini S, BMS Main X, BMS Main 3 или BMS Main 3X. Он позволяет настраивать BMS через сеть Ethernet. |
| |
1.1 | 6 | |
| |
9.3 | 7 | Устройство не содержит функций шифрования и криптографии, а также не содержит батареек/аккумуляторов. |
| 8 | |||
| |
1.1 | 9 | (% id="cke_bm_4104S" style="display:none" %) (%%)Overall architecture of a battery system that is controlled by an upper-level system via Ethernet is shown below. |
| 10 | |||
| 11 | [[image:1734099501895-554.png||data-xwiki-image-style-alignment="center" height="344" width="450"]] | ||
| 12 | |||
| 13 | = Specifications = | ||
| 14 | |||
| |
9.3 | 15 | |**Параметр**|**Значение** |
| 16 | |Напряжение питания, В|5,0 ± 0,5 | ||
| 17 | |Потребляемый ток, мА, не более|200 | ||
| 18 | |Скорость подключения, Мбит/с|10/100 | ||
| 19 | |Габариты (длина × ширина × высота), мм|44 × 42 × 24 | ||
| 20 | |Масса, г|14 ± 2 | ||
| 21 | |(% colspan="2" %)**Условия эксплуатации** | ||
| 22 | |Диапазон рабочих температур, °С|от -40 до +85 | ||
| 23 | |Степень защиты от внешних воздействий|IP00 | ||
| |
1.1 | 24 | |
| 25 | = Connection procedure = | ||
| 26 | |||
| 27 | (% class="box warningmessage" %) | ||
| 28 | ((( | ||
| 29 | **Attention!** | ||
| 30 | Connecting the BMS LANmodule 1.x is performed to the powered-off BMS controller! | ||
| 31 | ))) | ||
| 32 | |||
| |
5.1 | 33 | The BMS LANmodule must be inserted into the corresponding header of the BMS controller. The device must be fixed to the BMS controller by **11mm M3 standoffs** and M3 screws. |
| |
1.1 | 34 | |
| |
7.1 | 35 | Here is the example of header for additional devices on BMS Main X: |
| |
1.1 | 36 | |
| 37 | [[image:1734099661846-836.png||data-xwiki-image-style-alignment="center" height="423" width="450"]] | ||
| 38 | |||
| 39 | = Configuration = | ||
| 40 | |||
| 41 | |||
| |
9.1 | 42 | Configuration of the BMS LANmodule must be done according to the BMS controller’s configuration manual, see [[Battery management systems>>path:/bin/view/Battery%20management%20systems/]]. |
| |
1.1 | 43 | |
| |
9.1 | 44 | Typically, the connection settings located in the “Connectivity -> LAN” section of the settings. |
| 45 | |||
| |
1.1 | 46 | (% class="box warningmessage" %) |
| 47 | ((( | ||
| 48 | To apply new connection settings, it is necessary to restart the BMS controller. | ||
| 49 | ))) |