Skip to Content

Wiki source code of 2. Installation and connection

Version 3.1 by Admin on 2024/12/13 15:46

Show last authors

author	version	line-number	content
		1	(% data-numbered-headings-start="2" style="--numbered-headings-start: 1;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
		2	= Installation and connection =
		3
		4	== Installation ==
		5
		6	The BMS Indication 2.x has two headers for connecting the BMS (P2 and P3), a header for connecting external equipment (a PC, for example), and a switch which connects a terminal resistor to the CAN bus (SWD1).
		7
		8	[[image:1734104601122-708.png\|\|data-xwiki-image-style-alignment="center" height="411" width="350"]]
		9
		10	\|Parameter\|Value
		11	\|Overall dimensions (length × width × height), mm\|61 × 49 × 27
		12	\|Mounting dimensions (length × width), mm\|55 × 43
		13	\|Mounting holes\|M3
		14	\|Header types\|Molex series Mini-Fit, DB-9F
		15
		16	== Headers ==
		17
		18	=== P2, P3 – headers for communication with BMS ===
		19
		20	[[image:1734104743581-727.png\|\|data-xwiki-image-style-alignment="center"]]
		21
		22	\|Pin\|Name\|Description
		23	\|1\|CANH\|CAN H line for communication with the BMS controller
		24	\|2\|CANL\|CAN L line for communication with the BMS controller
		25	\|3\|+5V\|Supply voltage 5 V
		26	\|4\|GND\|Ground
		27
		28	=== J1 – header for external equipment ===
		29
		30	[[image:1734104763162-358.png\|\|data-xwiki-image-style-alignment="center" height="66" width="125"]]
		31
		32	\|Pin\|Name\|Description
		33	\|1\|-\|-
		34	\|2\|CANL\|CAN L line for communication with external equipment
		35	\|3\|-\|-
		36	\|4\|-\|-
		37	\|5\|-\|-
		38	\|6\|GND\|Ground
		39	\|7\|CANH\|CAN H line for communication with external equipment
		40	\|8\|-\|-
		41	\|9\|-\|-
		42
		43	=== SWD1 – CAN terminal resistor switch ===
		44
		45	To connect the terminal resistor between the CANH and CANL lines, switch the SWD1 to the ON position.