Skip to Content
Last modified by Admin on 2025/03/18 12:35
From version 3.2
edited by Admin
on 2024/12/13 16:00
Change comment: Update document after refactoring.
To version 6.1
edited by Admin
on 2025/02/20 12:44
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -3,7 +3,7 @@
3 3  
4 4  == Installation ==
5 5  
6 -The BMS Indication 2.x has two headers for connecting the BMS (P2 and P3), a header for connecting external equipment (a PC, for example), and a switch which connects a terminal resistor to the CAN bus (SWD1).
6 +Overall and mounting dimensions of BMS Indication are shown on figure below:
7 7  
8 8  [[image:1734104601122-708.png||data-xwiki-image-style-alignment="center" height="411" width="350"]]
9 9  
... ... @@ -11,12 +11,15 @@
11 11  |Overall dimensions (length × width × height), mm|61 × 49 × 27
12 12  |Mounting dimensions (length × width), mm|55 × 43
13 13  |Mounting holes|M3
14 -|Header types|Molex series Mini-Fit, DB-9F
15 15  
16 16  == Headers ==
17 17  
17 +The BMS Indication has two headers for connecting the BMS (P2 and P3), a header for connecting external equipment (a PC, for example), and a switch which connects a terminal resistor to the CAN bus (SWD1).
18 +
18 18  === P2, P3 – headers for communication with BMS ===
19 19  
21 +Receptacle Housing: Molex 39012040. Terminals: Контакты: Molex 5556
22 +
20 20  [[image:1734104743581-727.png||data-xwiki-image-style-alignment="center"]]
21 21  
22 22  |**Pin**|**Name**|**Description**