Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/02/28 11:48
From version 6.8
edited by Admin
on 2025/02/28 10:59
Change comment: There is no comment for this version
To version 10.1
edited by Admin
on 2025/02/28 11:11
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 -(% data-numbered-headings-start="4" style="--numbered-headings-start: 3;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
1 +(% data-numbered-headings-start="5" style="--numbered-headings-start: 4;font-size: 0px;color: rgba(0, 0, 0, 0.0);margin-bottom: 0px; margin-top: 0px;" %)
2 2  = Firmware update =
3 3  
4 4  == Introduction ==
... ... @@ -9,7 +9,7 @@
9 9  
10 10  * PC or laptop with Windows 10 or newer;
11 11  * BMS USB-CAN adapter – a device to power up and communicate with the BMS Display;
12 -** Also Systec, PEAK and Marathon USB-CAN adapters are supported, but
12 +** Also Systec, PEAK and Marathon USB-CAN adapters are supported, but external power supply for BMS Display is needed;
13 13  * [[ElectricDeviceMonitor>>https://movicomelectric.com/wa-data/public/site/app/ElectricDeviceMonitorSETUP.exe]] – a software to monitor and configure devices by Movicom Electric;
14 14  * Firmware (*.srec) – a new firmware for the BMS Display.
15 15  
... ... @@ -17,9 +17,9 @@
17 17  
18 18  Follow the steps below:
19 19  
20 -~1. Connect the BMS Display to the USB-CAN adapter.
20 +~1. Connect the BMS Display to the BMS USB-CAN adapter.
21 21  
22 -2. Move switches of the to the following positions:
22 +2. Move switches of the BMS USB-CAN to the following positions:
23 23  
24 24  * 120 Ohm – “I”;
25 25  * +5V – “0”.
... ... @@ -38,8 +38,11 @@
38 38  
39 39  [[image:Battery management systems.BMS Logic 12.4\. Firmware update.WebHome@1733156153290-392.png||data-xwiki-image-style-alignment="center" height="320" width="296"]]
40 40  
41 -8. Select the CAN transport (BMS USB-CAN) (1.0.0) and click the “Settings” button to configure the adapter: select port name that corresponds to the BMS USB-CAN adapter and 250 kbit/s baud rate.
41 +8. Select the CAN transport (BMS USB-CAN) (1.0.0) and click the “Settings” button to configure the adapter:
42 42  
43 +* select port name that corresponds to the BMS USB-CAN adapter;
44 +* set 250 kbit/s baud rate.
45 +
43 43  [[image:1740738923079-336.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
44 44  
45 45  9. Click the “Browse…” button and open the new firmware file in .srec format.