Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/02/28 11:48
From version 6.6
edited by Admin
on 2025/02/28 10:58
Change comment: There is no comment for this version
To version 6.3
edited by Admin
on 2025/02/28 10:54
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -8,7 +8,7 @@
8 8  Required hardware and software:
9 9  
10 10  * PC or laptop with Windows 10 or newer;
11 -* BMS USB-CAN adapter – a device to communicate with the BMS Display;
11 +* BMS USB-CAN – a device to power and communicate with the BMS Display;
12 12  * [[ElectricDeviceMonitor>>https://movicomelectric.com/wa-data/public/site/app/ElectricDeviceMonitorSETUP.exe]] – a software to monitor and configure devices by Movicom Electric;
13 13  * Firmware (*.srec) – a new firmware for the BMS Display.
14 14  
... ... @@ -18,7 +18,7 @@
18 18  
19 19  ~1. Connect the BMS Display to the USB-CAN adapter.
20 20  
21 -2. Move switches of the to the following positions:
21 +2. If BMS USB-CAN used, move switches of the to the following positions:
22 22  
23 23  * 120 Ohm – “I”;
24 24  * +5V – “0”.
... ... @@ -25,7 +25,7 @@
25 25  
26 26  3. Connect the USB-CAN adapter to a PC.
27 27  
28 -4. Move the switch “+5V” of the BMS USB-CAN to “I”. Check that the led of the BMS Display is blinking.
28 +4. If BMS USB-CAN used, move the switch “+5V” of the BMS USB-CAN to “I”. Otherwise power up the BMS Display. Check that the led of the BMS Display is blinking.
29 29  
30 30  5. Open the Device Manager* and determine a name of an appeared serial port (Click the right mouse button on the Start menu and select the “Device Manager” item):
31 31  
... ... @@ -37,7 +37,7 @@
37 37  
38 38  [[image:Battery management systems.BMS Logic 12.4\. Firmware update.WebHome@1733156153290-392.png||data-xwiki-image-style-alignment="center" height="320" width="296"]]
39 39  
40 -8. Select the CAN transport (BMS USB-CAN) (1.0.0) and click the “Settings” button to configure the adapter: select port name that corresponds to the BMS USB-CAN adapter and 250 kbit/s baud rate.
40 +8. Select the corresponding CAN transport and click the “Settings” button to configure the adapter: select device or port name that corresponds to the USB-CAN adapter and 250 kbit/s baud rate.
41 41  
42 42  [[image:1740738923079-336.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
43 43  
... ... @@ -50,7 +50,7 @@
50 50  [[image:1740739041707-667.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="295" width="300"]]
51 51  
52 52  * Set the following connection settings and click the “Launch” button:
53 -** port name that corresponds to the BMS USB-CAN adapter;
53 +** device or port name that corresponds to the USB-CAN adapter;
54 54  ** baud rate: 250 kbit/s;
55 55  ** BMS Display Node ID (20 by default).
56 56  
... ... @@ -64,4 +64,4 @@
64 64  
65 65  ~11. Return to the “Updater” window and click the “Update” button. The updating process will start.
66 66  
67 -12. Wait the updating process is finished. Move the “+5V” switch to the “0” position. and disconnect the BMS Display device from the BMS USB-CAN adapter.
67 +12. Wait the updating process is finished. If using BMS USB-CAN, move the “+5V” switch to the “0” position and disconnect the BMS Display device from the BMS USB-RS485.