Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/02/28 11:48
From version 4.13
edited by Admin
on 2025/02/28 10:41
Change comment: There is no comment for this version
To version 6.2
edited by Admin
on 2025/02/28 10:54
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -50,17 +50,18 @@
50 50  [[image:1740739041707-667.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="295" width="300"]]
51 51  
52 52  * Set the following connection settings and click the “Launch” button:
53 -** device or port name that corresponds to the USB-CAN adapter
54 -** baud rate: 250 kbit/s
53 +** device or port name that corresponds to the USB-CAN adapter;
54 +** baud rate: 250 kbit/s;
55 +** BMS Display Node ID (20 by default).
55 55  
56 -[[image:1733156153293-550.png||data-xwiki-image-style-alignment="center" height="227" width="410"]]
57 +[[image:1740739961052-896.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="237" width="450"]]
57 57  
58 -* In the opened window, click the “Bootloader” button. The device will reboot and will be waiting commands to update the firmware.
59 +* In the opened window, click the “Send” button under "Reset and start bootloader" section. The device will reboot and will be waiting commands to update the firmware.
59 59  
60 -[[image:1733156153294-767.png||data-xwiki-image-style-alignment="center" height="425" width="648"]]
61 +[[image:1740740038720-603.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="553" width="600"]]
61 61  
62 62  * **Select the menu “Monitor - Stop” or click the “Stop” button to release the serial port and allow to use it for updating the firmware.**
63 63  
64 64  ~11. Return to the “Updater” window and click the “Update” button. The updating process will start.
65 65  
66 -12. Wait the updating process is finished. Move the switches “+5V” and “Cells” to the “0” position and disconnect the BMS Logic device from the BMS USB-RS485.
67 +12. Wait the updating process is finished. If using BMS USB-CAN, move the “+5V” switch to the “0” position and disconnect the BMS Displ device from the BMS USB-RS485.
1740739961052-896.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +12.1 KB
Content
1740740038720-603.png
Author
... ... @@ -1,0 +1,1 @@
1 +XWiki.admin
Size
... ... @@ -1,0 +1,1 @@
1 +49.9 KB
Content