Skip to Content

Changes for page 5. Firmware update

Last modified by Admin on 2025/02/28 11:48
From version 4.10
edited by Admin
on 2025/02/28 10:39
Change comment: There is no comment for this version
To version 4.13
edited by Admin
on 2025/02/28 10:41
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -37,7 +37,7 @@
37 37  
38 38  [[image:Battery management systems.BMS Logic 12.4\. Firmware update.WebHome@1733156153290-392.png||data-xwiki-image-style-alignment="center" height="320" width="296"]]
39 39  
40 -8. Select the correspon transport “CAN transport (BMS USB-CAN) (1.0.0)” and click the “Settings” button to configure the adapter: select a port name that corresponds to the BMS USB-CAN and 250 kbit/s baud rate.
40 +8. Select the corresponding CAN transport and click the “Settings” button to configure the adapter: select device or port name that corresponds to the USB-CAN adapter and 250 kbit/s baud rate.
41 41  
42 42  [[image:1740738923079-336.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true"]]
43 43  
... ... @@ -50,9 +50,8 @@
50 50  [[image:1740739041707-667.png||data-xwiki-image-style-alignment="center" data-xwiki-image-style-border="true" height="295" width="300"]]
51 51  
52 52  * Set the following connection settings and click the “Launch” button:
53 -** serial port name of the BMS USB-RS485
54 -** baud rate and data format: 115200 kbps, 8 bits, no parity, 1 stop bit
55 -** address – 247
53 +** device or port name that corresponds to the USB-CAN adapter
54 +** baud rate: 250 kbit/s
56 56  
57 57  [[image:1733156153293-550.png||data-xwiki-image-style-alignment="center" height="227" width="410"]]
58 58